Satin Hair 7
Internet:
www.braun.com
www.service.braun.com
Braun GmbH
Frankfurter Straße 145
61476 Kronberg/Germany
China/UK
90909846/IV-16
Leporello, 6 pages, open Format 65 x 440 mm,
closed Format 65 x 220 mm, 1/1c = black
BR 710
BR 730
BR 750
IONTEC
Type 3558
www.braun.com
Satin Hair 7
2
on
IONTEC
Satin Hair 7
ION
TEC
Satin H
a
ir 7
1
2
1
2
7
6
5
4
3
2
a
b
c
1
7
6
5
4
3
BR 710
BR 730
BR 750
345
English
Please read the use instructions completely
before using the appliance.
Models BR 710 and BR 730 are provided with
plastic bristles, model BR 750 is provided
with natural boar bristles.
Do not use the Satin Hair Brush as a styling
brush in combination with a hairdryer.
IONTEC reveals its best eff ect on dry hair.
Warning
•
This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge if
they have been given supervision or instruction concerning
the safe use of the appliance
and understand the hazards
involved. Children shall not play
with the appliance. Cleaning
and user maintenance shall
not be made by children unless
they are older than 8 years and
supervised.
•
Batteries may leak if empty or
not used for a longer time. In
order to protect you and the
appliance, please remove
batteries in a timely manner
and avoid skin contact whilst
handling leaking batteries.
Non-rechargeable batteries
are not to be recharged. The
supply terminals are not to be
short-circuited. Do not mix new
and used batteries, nor mix different battery types. Batteries
are to be inserted with correct
polarity.
Batteries
The appliance operates with two 1.5 V
alkaline manganese batteries (type LR03,
AM4, AAA). Slide down the battery compartment cover (7), insert the batteries
with the poles in the direction indicated
and close the battery compartment.
When the low battery indicator (6) lights
up, it is time to replace the batteries.
Usage
Slide up the on/off switch (5) in order
to turn on the IONTEC function. During
operation, the IONTEC light (4) shines and
the ion jet (1) releases a rich stream of
ions. Make sure not to cover the ion jet (1)
with your fi ngers or palm in order to give
free way to the stream of ions. After use,
always slide back the switch (5) to its lower
position.
This switches off the IONTEC function and
protects the ion jet from being damaged
by other objects (e. g. in a handbag).
After 5 minutes of operation, the IONTEC
function switches off automatically. In this
case, slide back the switch to its lower
position.
Cleaning
You may clean the brush housing with a
damp cloth. For a thorough cleaning, the
bristle pad (3) is removable: Press the
release button (2) to remove the bristle
pad and clean it with soapy water.
Only re-insert the bristle pad after it has
dried completely.
Subject to change without notice.
At the end of their life, empty
batteries and the appliance should
not be thrown away with general
waste or rubbish. Please dispose of
them at a Braun Service Centre or at
an appropriate local collection point.
Loading...