Boss Genesis Cafe Installation And Service Manual

The Coffee

Professor

Reverse Osmosis System

Model – Genesis Cafe

Congratulations on your purchase of the most

advanced water purifier system available!

Installation and Service Guide

PLEASE READ THIS MANUAL CAREFULLY BEFORE

ATTEMPTING INSTALLATION

Page 1

REVERSE OSMOSIS WATER PURIFIERS

Of all methods that purify drinking water for domestic use, the process of REVERSE OSMOSIS
is the most advanced, economical and effective. REVERSE OSMOSIS has the ability, unlike
conventional filters, to remove contaminants such as dissolved solids and all other impurities.

The REVERSE OSMOSIS (RO) process works by forcing water under pressure through a
special TFC Membrane. The membrane has the astounding quality of attracting water
molecules and repelling dissolved impurities, even those smaller than the water molecules
themselves.

The REVERSE OSMOSIS (RO) purifiers remove all the contaminants of concern to the
consumer such as bacteria, viruses, parasites, heavy metals, inorganic chemicals, pesticides
and algae.

RO purifiers flush the impurities down the drain rather than collecting them in the filters, as is
the case with ordinary systems, preventing any build up within the system.

Also RO systems oxygenate the water giving it a lively fresh taste, unlike distilled water, which
may have a flat dead taste.

With REVERSE OSMOSIS, you can be rest assured your drinking water is of the highest quality
possible and the best possible investment for your families’ health.

HOW DOES IT WORK?

Polluted water is forced by mains water pressure against a semi-permeable membrane.
Purified water molecules easily pass through the membrane while pollutants, typically being
larger than the pores ( .0005 of a micron in size), cannot pass through and are washed away.

Please read this entire service guide
before beginning installation

Page 2

This Reverse Osmosis Drinking Water System has been designed for simple
installation and maintenance. By carefully reading this instruction manual and
following the operational guidelines you will ensure a successful installation and
reliable operation. Routine maintenance is essential to the longevity and
performance of the system. Filters should be changed as per service intervals
indicated on page 4.

CONDITIONS FOR OPERATION

Source Water Supply – TFC

System Pressure

40 - 90 PSI (300 - 620 kpa)

Temperature

2º - 40º C (36º - 104º F)

pH Range

3.0 - 11.0

Maximum Supply TDS
Level

500 mg/L
Turbidity

<1.0 Net Turbidity (NTU)

CAUTION

DO NOT USE THIS SYSTEM WHERE THE WATER IS MICROBIOLOGICALLY UNSAFE OR OF UKNOWN
QUALITY WITHOUT FIRST CHECKING WITH YOUR DISTRIBUTOR. THIS SYSTEM IS DESIGNED FOR USE
ON POTABLE WATER WITHIN THE ABOVE CONDITIONS FOR OPERATION.

ROCAFE

Reverse Osmosis Purifier

The ROCAFE drinking water purifier represents the very latest in design and ultimately has
become the standard for the drinking water industry. The ROCAFE model remains unequalled
in quality, reliability and overall performance.

Years of engineering experience, field-testing and continued design refinement combines to
make the ROCAFE the best in its class.

STAGE 1 SEDIMENT PRE-FILTER

For Mechanical Filtration

Protects and extends the life of the membrane. Removes sediment particles –

grit, dust, rust, mud, algae etc.

STAGE 2 CARBON PRE-FILTER

For Membrane Protection

Page 3

A special high-grade carbon cartridge pre-filter is added to protect the TFC

Membrane from chlorine degradation.

Specially designed to remove – pesticides and other organic pollutants e.g.

chlorine, THM, TCE etc. Contains special acid washed, dedusted carbon with
excellent absorbent qualities.

STAGE 3 ULTRAFINE RO MEMBRANE

Screens out the most minute microparticles. Pore size less than .0005 micron
( 1 micron = one thousand of a Millimetre)
Effectively repels: heavy metal complexes including aluminium, lead, mercury etc,

microorganisms and colloidal matter.

STAGE 4 CARBON POLISHING POST-FILTER

Provides final polish resulting in superb tasting water.

STAGE 5 CALCITE RE-MINERALISER

CARTRIDGE REPLACEMENT

Sediment Pre-Filter

Up to 12 months

Carbon Pre-Filter

Up to 12 months

TFC RO Membrane

3 – 5 years

Carbon Post-Filter

12 to 24 months

Post Calcite Re-Mineraliser

24 to 48 month

INSTALLATION

Preparation

Check the following list of components to
ensure that all parts are packed with your
system

1 – Storage Tank
1 – RO System
1 – RO Water Faucet
1 – Installation Kit

Determine the location for the installation of
the RO system. Avoid locations where the
system might come in contact with hot water
pipes or other hazards, taking into
consideration ease of maintenance.

Determine the location for the faucet.
Check to see that drilling the faucet hole
will not damage pipes or wires running
underneath the sink.

Determine the location for the storage tank.
A maximum distance from tank to faucet of
4 metres (12 feet) is possible. The system
will produce a faster flow at the faucet with
the shortest tubing run from tank to faucet.

All tubing is colour coded for ease of installation.
1/4” Blue – Connects the feed water valve to the RO pre-filter.
1/4” Yellow – Connects the RO membrane product port to the storage tank.
1/4” Black – Connects the membrane brine port to the drain connector.
1/4” White – Connects the post-filter to the faucet.

Page 4