Bosch TC9201 Specsheet

CCTV | TC9200 Series Indoor Camera Mounts

TC9200 Series Indoor Camera Mounts

Sturdy Construction

▶

Attractive Appearance

▶

Versatile Design

▶

Adjustable

▶

Wide Selection of Styles

▶

Lightweight

▶

The TC9200 Series Indoor Camera Mounts can be used with
CCD cameras with fixed and varifocal lenses. These sturdy,
attractive mounts have fully adjustable mount heads and
standard 1/4-20 camera mounting bolts. Maximum load
capability ranges from 2 kg (4.4 lb) to 10 kg (22 lb). These
versatile models can be used as pedestal, wall, or ceiling
mounts and are well suited for use with CCD cameras.

Functions

Model TC9200 is an economical 200 mm (8 in) general
purpose mount for loads of up to 4 kg (8.8 lb). It has an
aluminum finish and an adjustable sleeve ball mounting
clamp for camera position adjustments.

A deluxe general purpose mount, the 200 mm (8 in) TC9201
can handle loads of up to 9 kg (20 lb) and has a glossy black
finish. It features a lever type ball mounting clamp for quick
and easy adjustments of camera position.

The TC9202 model is an extendible wall mount with a range
of length from 244 mm to 414 mm (9.6 in to 16.3 in). It can
accommodate loads of up to 10 kg (22 lb) in both the short
and the fully extended configurations and features a quick
release screw head for ease of camera positioning.

The right angle curve in the support arm of the TC9203
model mount can accommodate many difficult mounting
requirements. A universal wall/ceiling mount, this model
has a length of 230 mm (9.1 in) and can handle cameras of
up to 10 kg (22 lb).

Model TC9205 is an economical 127 mm (5 in) general
purpose mount which can handle loads of up to 2 kg
(4.4 lb).This mount features an aluminum finish and an
adjustable sleeve ball mounting clamp. The two mounting
holes in the base flange allow for direct mounting to a
standard electrical box (3 1/4-inch centers) and an opening
in its hollow shaft permits a direct cable feed to the
mounting head from the base to the camera.

The TC9206U indoor mount is configured for mounting
cameras in indoor applications. It accommodates loads of
up to 4.5 kg (10 lb) and is constructed of aluminum and
steel, providing extremely rigid camera mounting.

An economical general purpose mount, the TC9207 model
accommodates loads of up to 4 kg (8.8 lb). It utilizes a
sleeve ball mounting clamp and comes in an aluminum
finish with an off-white base flange.

Featuring threaded extensions, this unit can be configured
to three different lengths and is easily installed with the
included mounting hardware. This unit can be used with
many model CCD cameras.

www.boschsecurity.com

2 | TC9200 Series Indoor Camera Mounts

Installation/Configuration Notes

TC9200 Indoor Camera Mount

Maximum Load 4 kg (8.8 lb)

Mounting Head Adjustable 360° pan, 90° tilt

Mounting Bolt Standard 1/4-20

Finish Aluminum

Weight 230 g (0.44 lb)

TC9203 Indoor Camera Mount

Maximum Load 10 kg (22 lb)

Mounting Head Adjustable 360° pan,90° tilt

Mounting Bolt Standard 1/4-20

Finish Aluminum and black

Weight 460 g (1.0 lb)

TC9201 Indoor Camera Mount

Maximum Load 9 kg (20 lb)

Mounting Head Adjustable 360° pan, 90° tilt

Mounting Bolt Standard 1/4-20

Finish Gloss black

Weight 230 g (0.44 lb)

TC9202 Indoor Camera Mount

Maximum Load 10 kg (22 lb)

Mounting Head Adjustable 360° pan, 90° tilt

Mounting Bolt Standard 1/4-20

Finish Aluminum and black

Weight 510 g (1.1 lb)

TC9205 Indoor Camera Mount

Maximum Load 2 kg (4.4 lb)

Mounting Head Adjustable 360º pan, 90º tilt

Mounting Bolt Standard 1/4-20

Finish Aluminum

Weight 240 g (5.3 lb)