Bosch ISC-CDL1-W15G Specsheet

Intrusion Alarm Systems | Commercial Series TriTech Motion Detectors

Commercial Series TriTech Motion

Detectors

www.boschsecurity.com

The Commercial Series TriTech motion detectors are designed to ensure reliable catch performance and false alarm immunity in commercial applications. ISC- CDL1-W15x detectors use a combination of passive infrared (PIR) and microwave Doppler radar detection technologies with advanced signal processing. New features such as integrated, selectable end-of-line resistors, a self-locking enclosure with integrated bubble level, and removable lift gate style terminal strip make installation of Commercial Series detectors easier and more reliable.

Functions

First Step Processing

First Step Processing (FSP) almost instantly responds to intruders without producing false alarms from other sources. FSP adjusts the detector's sensitivity based on signal amplitude, polarity, slope, and timing. The installer can select the sensitivity level, thus improving reliability.

GHZ

uTriTech - Passive infrared and microwave Doppler radar detection with First Step Processing for superior catch performance and best-in-class false alarm immunity

uMicrowave Noise Adaptive Processing - Avoids false alarms from repetitive sources

uIntegrated EOL resistors - Reduces installation time and complexity

uFlexible mounting height, no adjustments - Reduces installation time and false alarms, improves catch performance

uSelf-locking enclosure with bi-axial bubble level for faster installation

Microwave Noise Adaptive Processing

Microwave Noise Adaptive Processing adjusts to background disturbances, reducing false alarms from repetitive sources without sacrificing intruder detection.

Integrated jumper selectable EOL resistors

The integrated EOL resistors simplify the wiring process and reduce installation time.

Flexible mounting heights

No adjustments required when mounted from 2.3 to 2.75m (7.5 to 9.0 ft). Reduce installation time and false alarms while improving catch performance.

Self-locking enclosure with removable terminal strip

The sliding, self locking enclosure has an integrated biaxial bubble level and custom gap free, lift gate style terminal strip to make installation easier and more reliable.

2 | Commercial Series TriTech Motion Detectors

Dynamic temperature compensation

The detector intelligently adjusts its sensitivity so that it can identify human intruders at virtually any temperature.

Small animal immunity

The small animal immunity feature reduces false alarms from small animals up to 4.5 kg (10 lbs) that may move on the floor within the coverage area of the detector.

Protected, sealed optics and electronics

The optics and electronics are assembled into the front enclosure and sealed with a protective cover to prevent damage during installation. The sealed optical chamber also prevents drafts and insects from affecting the detector.

Test features

Externally visible alarm LED can be disabled after installation.

Switch configuration

The following functions are selectable using switches:

•Alarm LED On and Off

•PIR sensitivity

Wall-to-wall coverage

A user-selectable integrated lookdown zone and coverage range of 15 m x 15 m (50 ft x 50 ft) provide wall-to-wall coverage.

Certifications and approvals

Region	Agency	Certification
USA	UL	-W15G: Intrusion
		Detection Unit Type: S
	FCC	FCC Part 15 Class B
Canada	cUL	-W15G: Intrusion
		Detection Unit Type: S
	IC	1249A-CDL1
Europe	EN Standards	EN50131-2-4 Grade 2
		EN50130-5
		Environmental Class II
		IP41 / IK04 (EN60529,
		EN 62262)
France	AFNOR/CNPP/	ISC-CDL1-W15G Cert #
	NFA2P	2800200015
		NF&A2P Grade 2
		ISC-CDL1-WA15H Cert #
		2830200013
		RTC 50131-2-4 Grade 2
		NF-324-H58 – 110P2
		AFNOR Certification:
		www.afnor.org
		CNPP Cert.:
		www.cnpp.com

Region	Agency	Certification
		Sécurité contre la fraude:
		Autosurveillance à
		l’ouverture et à
		l’arrachement, Immunité
		champ magnétique.
Australia	ACMA	RCM

Region	Certification
Europe	CE	EMC, LVD, R&TTE, RoHS [-W15G, -
		W15H, -W15K, -WA15G, -WA15H, -
		WA15K]
Belgium	INCERT	B-509-0066 [-W15G, -W15H]
	INCERT	B-509-0067 [-WA15G, -WA15H]
Sweden	SBSC	15-475 [-W15G] Alarm Class 1/2, Envi-
		ronmental Class II (Larmklass 1/2 miljö-
		klass II)
USA	UL	[-WA12G, -W15G, -WA15G]
France	AFNOR	[-W15H]
	AFNOR	2800200015A0 [-W15G]

Installation/configuration notes

Mounting

The recommended mounting height is 2.3 m to 2.75 m (7.5 ft to 9 ft) with no adjustments required.

The detector can be mounted:

•In a corner by utilizing the beveled edges of the detector base.

•On a flat wall by securing the detector base directly to the wall.

•On a flat wall using the optional B328 Gimbal-mount Bracket, or B335 Swivel-mount Bracket.

•On the ceiling with the optional B338 Ceiling-mount Bracket.