Bosch ISC-BPQ2-W12 Specsheet

Intrusion Alarm Systems | Blue Line Gen2 Quad PIR Motion Detector

Blue Line Gen2 Quad PIR Motion Detector

www.boschsecurity.com

The Blue Line Gen2 Quad PIR Detector (ISCBPQ2 W12) uses two individual sensors that operate like two PIRs in one detector. Each sensor processes signals separately. Both must activate to generate an alarm signal. This improves false alarm immunity relative to a standard PIR, because false alarm sources such as noise spikes and small animals are ignored. Quad detectors also provide superior catch performance versus a standard PIR or dual-technology detector. They are particularly well suited for challenging installation situations; for example, cases where cross catch of intruders cannot be guaranteed or where intruders are able to cross the detection pattern very quickly.

Functions

First Step Processing (FSP)

First Step Processing (FSP) almost instantly responds to human targets without producing false alarms from other sources. FSP adjusts the detector's sensitivity based on signal amplitude, polarity, slope, and timing. This eliminates the need for the installer to select the sensitivity level, thus improving ease of installation and reliability.

uDynamic Temperature Compensation – superior catch performance in any environment

uWall to Wall Coverage – superior catch performance

uFlexible Mounting Height, No Adjustments – reduce installation time and false alarms, improve catch performance

uSelf-locking Enclosure with Integrated Bubble Level

– reduce installation time

Dynamic Temperature Compensation

The detector intelligently adjusts its sensitivity to maintain its ability to identify human intruders at virtually any temperature.

Wall-to-Wall Coverage

An improved lookdown zone and coverage range of 12 m x 12 m (40 ft x 40 ft) provide wall-to-wall coverage.

Self-locking Enclosure

The sliding self locking enclosure has an integrated bubble level and custom gap free, lift gate style terminal blocks to make installation easier.

Sealed Optics and Electronics

The optics and electronics are assembled into the front enclosure and sealed with a protective cover to prevent damage during installation. The sealed optical chamber also prevents drafts and insects from affecting the detector.

Test Features

Externally visible alarm LED can be disabled after installation.

2 | Blue Line Gen2 Quad PIR Motion Detector

Certifications and approvals

This detector is also designed to comply with the following:

Europe	Complies with EN50131-2-2 Grade 2
	Complies with EN50130-5 Class II
	Complies with EN60529, EN50102 (IP30, IK04)
	Complies with Directive 2002/95/EC - Restriction of the
	use of certain Hazardous Substances (RoHS)

Region	Certification
Europe	CE	2004/108/EC EMC Directive (EMC);
		2006/95/EC Low-Voltage Directive
		(LVD); 2011/65/EU Restriction of the
		use of certain hazardous substances in
		electrical and electronic equipment
		(RoHS)
	EN5013	EN50131-2-2 [-W12]
	1
Belgium	INCERT	B-509-0051/b
USA	UL	cULus - ANSR: Intrusion-detection Units
		(UL 639), ANSR7: Intrusion-detection
		Units Certified for Canada (ULC-S306)
France	AFNOR	2620200002A0 [-W12]
Sweden	INTYG	11-267 [-W12]
the Nether-	NCP	2011062 [ISC-BPR2-W12, -WP12, ISC-
lands		BPQ2-W12, ISC-BDL2-W12G, ISC-
		BDL2-WP12G, ISC-BDL2-WP6G]]
Bulgaria	GD
	FSPP
	GD	GODKJENNELSESBEVIS [-W12]
	FSPP

Installation/configuration notes

Coverage Patterns

12 m x 12 m (40 ft x 40 ft) coverage

Mounting

The recommended mounting height is 2.2 m to 2.75 m (7.5 ft to 9 ft) with no adjustments required.

Mount the motion detector level, both horizontally and vertically.

Mounting options:

•On a flat wall (surface, semi-flush), with the optional B335-3 Swiveling low-profile mount, or with the optional B328 Gimbal-mount Bracket

•In a corner (the junction of two perpendicular walls)

•On the ceiling with the optional B338 Universal Ceiling-mount Bracket

Parts included

Quant. Component

1Detector