Bosch Easy User Manual
Product
1
2
2
1
1
User Guide
Easy Series Intrusion Control Panel
Alarm Company:
Telephone Number:
2
1
1
Turning the System On or Off
Select an option from the table below to turn your system on or off.
Option Description
Present token.
Follow control center instructions.
1
2
Display States
Display Description
The system is off.
No alarm or trouble conditions exist.
You can turn the system on.
There is a system problem.
Follow all control center instructions.
One or more points are faulted. Follow all control
center instructions.
The system is on (occupied).
Select this option if you want your system on when
you are at your home or business.
The system is on (unoccupied).
Select this option if you want your system on when
you leave your home or business.
Fire or intrusion alarm occurs when the system is
off.
Press [i] button.
Follow control center instructions.
Enter passcode.
Follow control center instructions.
Exit Delay: You have ______ sec after turning the system on to exit
the building before an alarm occurs.
Entry Delay: You have ______ sec after entering the building to
turn the system off before an alarm occurs.
Silence an Alarm
To silence an alarm, present your token or enter your passcode.
Ensure that everyone in your home or business can distinguish between the fi re alarm tone
and the burglar alarm tone, and that they know how to appropriately respond.
Fire or intrusion alarm occurs when the system is on
(occupied).
Fire or intrusion alarm occurs when the system is on
(unoccupied).
www.boschsecuritysystems.com
© 2005 Bosch Security Systems
F01U003736C
1
3
5
6
7
7
6
5
4
3
3
4
4
5
5
Chime Mode
If Chime Mode is on, the control center sounds a tone whenever a
perimeter point is faulted and the system is off.
To turn Chime Mode on or off:
7
3
Emergency Buttons
Your alarm company must activate these buttons in the system
before you can use them.
Press and hold the appropriate emergency button for two sec to start
an alarm.
Emergency
Alarm Button Icon Button(s) to Press
Fire
Panic
Medical
User Maintenance
4
This system supports up to 22 users:
• User 1: Master user. Default passcode is 123455*.
• Users 2 to 21: System users.
• User 22: Duress user. The system sends a duress report when
the duress user’s token or passcode is used to turn the system
off.
* The length for all passcodes can be four or six digits depending on
system programming.
Follow all control center instructions.
6
User Authority
Functions Master User Users 2 to 21
Turn the system on or off x x
Start a two-way voice session
Access the System Maintenance Menu
Change own passcode x x
Access the User Menu
1
For two-way voice session instructions, refer to the Main Menu table
on page 3.
2
For system maintenance options, refer to the System Maintenance
Menu table on page 3.
3
User Menu options include adding new users, and changing or
deleting existing users. These options apply to Users 1 to 22.
1
2
3
xx
xx
x
2 sec.
6
Volume Adjust
To adjust the volume of the control center:
2 sec.
Quiet Control Center: Exit Delay and Entry Delay tones are silenced.
7
Audio Interface
Speak into this area to talk to someone on the telephone during
a two-way voice session.
ON OFF
LOW MEDIUM HIGH QUIET
Starting a Phone Session
You can perform several functions with your security system from the
premises phone or from an outside phone.
Refer to page 3 for phone functions.
Premises Phone
Press [#] three times. The system disconnects the outside phone line
and asks you for a passcode.
Outside Phone
1. Call the premises phone number.
2. After the call is answered by either a person or a telephone
answering device, press [*] three times to disconnect the
answering party and access the system.
3. Enter your passcode when prompted.
If the phone is not answered by a person or telephone
answering device, the system answers after a programmed
number of rings.
When the system answers, it prompts you to enter your
passcode. You do not need to press [*] three times.
© 2005 Bosch Security Systems
F01U003736C
2
Loading...