Bosch ARD-AYBS6260 Specsheet

Engineered Solutions | LECTUS duo 3000 classic line

LECTUS duo 3000 classic line

www.boschsecurity.com

u RS485/OSDP and 26 Bit Wiegand interface

u For use with MIFARE classic cards and key-fobs u IP65 rated for indoor and outdoor use

u Wall or mullion mount u Tamper switch

System overview

The LECTUS duo 3000 classic line consists of two readers for MIFARE classic cards and transponders. They support the data record of Bosch coded MIFARE credentials and the CSN of ISO14443A cards as well. Both readers provide a 26 Bit Wiegand and RS485/ OSDP host interface, selectable easily by DIP switch. When operating in RS485/OSDP mode up to eight readers can be connected to a respective controller, e.g. AMC2-4R4. Reader address is settable via four DIP switches individually. Running in that mode readers can be easily supervised.

Three LED indicators and a beeper give clear feedback to the user during operation. The reader’s logo is illuminated in the dark. The reader is IP65 rated and fits for indoor and outdoor use.

Technical specifications

Electrical characteristics

Input voltage	8.5 V to 16 Vdc – max. 18 Vdc

Input power		> 2.4 W (200 mA @ 12 Vdc)
		Max.: > 3.5 W (290 mA @ 12 Vdc)
Operational Characteristics
Tamper output		Open collector, active low, 32 mA max
		sink current.
		Optical Technology
Wiegand D0 output		5 V (TTL)
Wiegand D1 output		5 V (TTL)
Green LED control input		Active low
Red LED control input		Active low
Buzzer control input		Active low
RS485		OSDP protocol
Wiegand IF		D0/D1 Wiegand protocol
Keypad		LECTUS duo 3000 C: none
		LECTUS duo 3000 CK: 2x6
Environmental Characteristics
Operating environment		Indoor and outdoor use - all weather.
Operating temperature		-25 °C to 65 °C (-13 °F to 150 °F)

2 | LECTUS duo 3000 classic line

Operating humidity		0 to 95% (Non-condensing)
IP rating		IP65
UV-light resistant		Yes
MIFARE & Cards Specification
Read range - ISO cards		> 6 cm (2.36 in.)
Key fob		> 2 cm (0.78 in.)
Supported cards		MIFARE 13.56 MHz
		ISO 14443 Type A
Anti-collision support		Yes
NXP chips supported		MF1ICS20 - 320 byte
		MF1ICS50 - 1K
		MF1ICS70 - 4K
MIFARE MAD, CSN Support
The reader follows the MAD rules
Reads INIT CSN			Yes
Reads CSN after non-detection of			Yes
MAD information
Physical Characteristics
Dimensions (L x W x D)		137 mm x 44 mm x 27.5 mm
		(approx. 5.39 in. x 1.73 in. x 1.08 in.)
Weight		Approx. 220 g (0.5 lb)

Ordering information

LECTUS duo 3000 C

Proximity reader supporting data record of Bosch coded MIFARE classic cards and keyfobs and CSN of ISO14443A credentials, providing RS485/OSDP and 26 Bit Wiegand interface on same device, IP65 rated for indoor and outdoor use, wall or mullion mount.

Order number ARD-AYBS6260

LECTUS duo 3000 CK

Proximity reader supporting data record of Bosch coded MIFARE classic cards and keyfobs and CSN of ISO14443A credentials, providing RS485/OSDP and 26 Bit Wiegand interface on same device, IP65 rated for indoor and outdoor use, wall or mullion mount, 2x6 keypad.

Order number ARD-AYBS6360

Represented by:
Americas:	Europe, Middle East, Africa:	Asia-Pacific:	China:	America Latina:
Bosch Security Systems, Inc.	Bosch Security Systems B.V.	Robert Bosch (SEA) Pte Ltd, Security	Bosch (Shanghai) Security Systems Ltd.	Robert Bosch Ltda Security Systems Division
130 Perinton Parkway	P.O. Box 80002	Systems	201 Building, No. 333 Fuquan Road	Via Anhanguera, Km 98
Fairport, New York, 14450, USA	5617 BA Eindhoven, The Netherlands	11 Bishan Street 21	North IBP	CEP 13065-900
Phone: [phone]	Phone: + 31 40 2577 284	Singapore 573943	Changning District, Shanghai	Campinas, Sao Paulo, Brazil
Fax: [phone]	Fax: [phone]	Phone: [phone]	200335 China	Phone: [phone]
[e-mail]	[e-mail]	Fax: [phone]	Phone [phone]	Fax: [phone]
www.boschsecurity.us	www.boschsecurity.com	[e-mail]	Fax: [phone]	[e-mail]
		www.boschsecurity.asia	www.boschsecurity.com.cn	www.boschsecurity.com

© Bosch Security Systems 2014 | Data subject to change without notice 16339930123 | en, V12, 26. May 2014