Bontrager TRIP 1, TRIP 4W User Manual

Trip™ 1 & Trip™ 4W

Owner’s Manual.

ENGLISH

WELCOME.

Thank you for buying a Bontrager Trip™ computer. We hope this computer gives you miles (or kilometers) of pleasure.

Your Trip computer may not include all of the features discussed in this manual. This manual covers Trip 1 and 4W models.

Please read this manual carefully. If you do not understand the information, or you have a question that this manual does not cover, consult your Authorized Bontrager Dealer or visit www.bontrager.com.

Safety When Riding

When riding your bicycle, do not stare at the computer for a long time (Figure 1). Failure to pay attention to the road ahead of you, obstacles, and traffic could result in a loss of control, serious injury, or death. Stay alert!

Make sure the computer wire cannot contact the tire, rim, or spokes. Contact with wires could damage the computer or cause you to lose control and fall.

Terms Used

Hold	Press a button continuously for about two
	seconds.
Press	Push a button once, briefly.
Reset	Set all values in the memory to 0 (zero) and erase
	all settings.
Trip Restart	Set Trip values (only) in the memory to 0 (zero).
Scroll	Press several times to scroll through a list of values
	or display elements.

Figure 1. Do Not Stare at Computer for Long Periods of Time.

Display Elements and Abbreviations

The Trip 4W can be used on two bicycles with different wheel sizes while still calculating data correctly for each wheel size. You must first set the wheel sizes and choose the appropriate bike setting before riding.

Trip Data (can be reset to 0 without affecting Odometer (ODO) total)

•Trip Distance (TRP)

•Average Speed (AVG) and Maximum Speed (MAX)

•Ride Time (TME)

Abbreviations and Screen Terms

Abbreviation		Meaning
AVG		Average Speed
CLK		Clock
CUR		Current Speed
MAX		Maximum Speed
ODO		Odometer
TME		Ride Time
TRP		Trip Distance

WHEEL SELECTION	SPEED
Wheel 1 or Wheel 2	Current
TRIP 4W ONLY	Average (AVG)
	Maximum (MAX)
	TRIP 4W ONLY
PACER
TRIP 4W ONLY
	DISTANCE
	Trip (TRP)
	Odometer (ODO)
	TIME
	Clock (CLK)
	Ride Time (TME)

Figure 2. Display Elements and Buttons.

Easy Setup

This procedure programs your Trip cycle computer for the first time or after a

Reset.

Install the Battery

To prolong the life of the battery, it is not installed at the factory. (See Figures 9 and 10 at the end of the manual for further help installing the battery.)

To Set the Units

You can program the wheel size, units, and time with just two buttons (Figure 2).

1. Install the battery (or push the Reset—seebuttonFigure 11 at end of manual).

2. The wheel size appears on the display.

3. To change the wheel size, press .

To select, press .

1.

2.

3.

4.To scroll between units of measurement, Miles per Hour (MH) or Kilometers

per Hour (KMH), press .

5.To select, press .

4. 5.

To Set the Clock

1. Scroll to Clock (CLK).

2. Hold for two seconds.

3. To change between 12 or 24 hour clock, press .

(for 2 seconds)

1.

2.

3.

4.	To select, press		.
5.	To change the hour, scroll				.
6.	To select, press		.

4.

5.

6.

7. To change the minutes, scroll .

8. To select, press .

7. 8.