Bonaire Cool Change User Manual

Owner Manual

Integra

Owner’s Manual

Table of Contents

General Information 3
Key Operational Points 4
Opening Windows and Doors 5
Radio Frequency Remote Control 6
Battery replacement 6
Operation Modes 8
Control Functions 9

Turning the Unit ON
Turning the) unit OFF
Changing the Mode of Operation
Changing Comfort Setting
Fan Only Operation
Cleaning the pads
Setting the Timer
Setting the Au to matic Operatin g Pe ri o d s
Automatic Operation

Overriding the Automatic Operation
Power Supply Interruption 11
Configuring your Comfort Control 11
Unit Maintenance 12
Problem Solving 14
Warranty Statement 15

Manufactured by: ABN 13 001 418 042

26 Nylex Avenue, Salisbury, SA 5108. Phone [phone] Fax: [phone]

In the interest of continued improvement, Bonaire reserves the right to alter specifications without notice. E.&O.E.

Page 2

Integra

Owner’s Manual
CONGRATULATIONS ON YOUR

We're delighted you've chosen a Bonaire Fresh Air Conditioner to cool your home. It is an air
conditioner we are very proud of. Designed and made in Australia by Climate Technologies,
an 100% Australian owned company, it embodies the latest advances in fresh air conditioning
technology in a stylish, compact cabinet. Your air conditioner includes the worId's first radio
frequency remote control allowing you to control your air conditioner without the need for
special wiring. This allows you the flexibility to move the comfort controller from room to room
to suit your needs. If you have more than one Bonaire Envirotech Series air conditioner it is
possible to operate all air conditioners from the one comfort controller.

COMFORT

Comfort is a combination of four major factors; air temperature, air quality and cleanliness, air
speed and humidity. Bonaire fresh air conditioning cools the air by a process of evaporation,
which is controlled by the humidity in the air, therefore your Bonaire will cool the air differently
every day of the year. Your Bonaire uses only 100% fresh outside air which is filtered, and
when cooling is also washed. You will immediately appreciate the benefit of this constant flow
of fresh air - with or without cooling. '(our Bonaire installer will have placed the outlets in such
a position that you will feel the air flow. These outlets are adjustable and you may wish to
change or redirect the air to suit yourself. There may be a few days per year when the
humidity is very high and the cooling effect of your Bonaire fresh air conditioner is reduced, on
these days experiment with the cooling, you may find it more comfortable to turn the cooling
off and leave the fan running.

INFORMATION

The information contained in the following pages has been prepared to ensure you enjoy
trouble free operation of your Bonaire Fresh Air Conditioner.

For additional sales assistance call your nearest Bonaire Branch on

131257

‘Due to Bonaire’s policy of continuous product improvement, design and technical
specifications are subject to change without notice.’
E.&O.E.

Page 3

Integra

Owner’s Manual

KEY OPERATIONAL POINTS

Normally during the first 10 days of operation resins are washed from new
filter material. A slight odour may be present during this period. Performance
of your Bonaire Air-conditioner will improve during this process.

1. BUILDING VENTILATION: Always ensure that adequate windows and doors are open

(to allow hot stale air to be expelled from the building). See page (4).

2. TURNIN G THE UNIT ON: Press the ON/OFF button. Your air conditioner will operate

on your previous settings. If your previous setting was cooling there may be a three

minute pre-cool delay.

3. COOLING: Press the "COOL` button to switch on or off the cooling.

4. BOOST ON/OFF: Press the "BOOST” button to go to high fan immediately. Press

again and the fan will return to the original setting.

5. TURNIN G THE UNIT OFF: Press the "ON/OFF" button.

6. COMFORT CONTROLLER LOCATION: Due to the construction of some buildings

there may be some locations within the building where the comfort controller operation

is not effective.

Page 4

Integra

Owner’s Manual
OPENING WINDOWS AND DOORS

The principal of your unit is to introduce fresh air, which is washed through the filter pads to
provided cool fresh air. The air is exhausted taking with it any heat loadings on the home.

Exhaust

It is essential for successful operation of evaporative air-conditioning that there be sufficient
exhaust openings in the area to be ventilated. Open doors and windows will usually provide
this.

The minimum exhaust opening should be as per the table guide set out below. It is
recommended that ceiling vents or exhaust fans be used where there is any doubt about t here
being sufficient exhaust area available. Ceiling exhaust fans or ceiling vents should have a
capacity equivalent to that of the air conditioner.

MODEL MINIMUM

EXHAUST AREA

VSS 50 0.85 m²

Page 5

VSS 60 1.19 m²
VSM 65 1.48 m²
VSL 75 2.02 m²