Biostar NF520-A2 TE Owner's Manual

NF520-A2 TE/NF520-A2 SE/NF520-A2 Setup Manual

FCC Inf or m at ion and Copyri ght

This equipment has been tested and found to comply with the limits of a Class
B digital devic e, pursuant to Part 15 of the FCC Rules. T hese limits are designed
to provide reasonab le p rotec tion ag ai nst harmful interfe rence in a resi dential
installation. This equipment generates , uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a pa r ticular ins tallation.

The vendor makes no re p res e ntatio ns or wa rranties wi th r es pec t to the
contents here and specially disclaims any implied warranties of merchantability
o r f i tn es s for any pu rp os e . F u rt he r t he ve nd o r rese rves t he ri g ht to r ev is e this
publication and to make changes to the contents here without obligation to
notify any party beforehand.

D up lica ti on o f this pu bl icat io n , i n p a rt or in whole , is no t al lo wed wit hout fi rst
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be res ponsible for a ny mis takes found in this user’s manual. A ll the
brand and produc t names are trademarks of their respective companies.

Table of Contents

Chapter 1 : In tro d u c tion.....................................................1

1.1 Before You Start................................................................... 1

1.2 Package Checklist................................................................ 1

1.3 Motherboard Features..........................................................2

1.4 Rea r Pa nel Co n necto rs (for Ve r 6.x) ....................................... 4

1.5 Rea r Pa nel Connec to rs (fo r Ver 5 .x)....................................... 4

1.6 Mot her boa r d Layou t (NF520-A2 TE/NF52 0-A 2 S E)..................... 5

1.7 Mot he r boa r d Layo u t (NF520-A2) .......................................... 6

Chapter 2: H ar d ware In stallation .....................................7

2.1 Installing Central Proce ssing Unit (CPU) ................................ 7

2.2 FAN Heade rs........................................................................ 9

2.3 Installing System Memory.....................................................10

2.4 Con necto rs a nd Slo ts............................................................12

Chapter 3: H ead er s & Jumpers Setu p..............................14

3.1 How to Set up Ju mper s..........................................................14

3.2 Det ail Settin gs.....................................................................14

Chapter 4 : RA ID Fu n c tions...............................................21

4.1 Operatio n System................................................................21

4.2 Raid Arrays.........................................................................21

4.3 How RAI D Wo r k s.................................................................21

Chapter 5: Us eful Help ..................................................24

5.1 Driver Instal lation Note .......................................................24

5.2 Award B IOS Beep Code........................................................25

5.3 Extra Informati on ................................................................25

5.4 Troubleshooting...................................................................26

Appenden c ies: S PEC In Other Languag e.............................28

Germa n................................................................................................28

France..................................................................................................30

Italian..................................................................................................32

Spanish................................................................................................34

Portuguese ...........................................................................................36

Polish...................................................................................................38

Russian................................................................................................40

Arabic..................................................................................................42

Japanese..............................................................................................44

NF520-A2 TE/NF520-A2 SE/NF520-A 2

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Tha nk you for choo sing our product. Be fo re you start installing the
mothe rboa rd , plea se make sure you fo llo w the ins tructio ns belo w:

 Prepare a dry and stable working environment with

s uf ficie nt lighting.

 Always disconnect the computer from power outlet

be fo re ope ration .

 Befo re you ta k e the mo the rboa rd ou t from an ti -s ta tic

bag, ground yourself properly by touching any safely
grounde d appliance, o r use g rounded wrist s trap to
remove the static charge.

 Avo id tou ch ing the compone nts o n mo the rboa rd o r the

rea r side of the board unless ne cessary. Ho ld the boa rd
on the edge , do no t try to be nd o r flex the board.

 Do not leave an y unfas tene d small parts inside the

case after installation. Loose parts will cause short
circuits which ma y damage the equ ipment.

 Keep the computer from dangerous area, such as heat

sou rce , humid a ir and water.

1.2 PACKAGE CHECKLIST

HDD Cable X 1
Se ria l ATA Cab le X 1

Rear I/O Panel for ATX Case X 1
Use r’s Ma nual X 1
Fully Se tup Driver CD X 1
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/P DI F ou t Ca ble X 1 (op tiona l)

Se ria l ATA Po we r Cab le X 1 (o ptio nal)

Note: The package contents may differ by area or your motherboard version.

1

Motherboard Manual

1.3 MOTHERBOARD FEATURES

NF52 0-A 2 TE/N F520-A 2 SE NF520-A2

Socket AM2

AM D Athl on 64 / At hlon 64 FX / Alt hlon 64 X2 /

CPU

FSB

Chi ps et nForce 520 nForce 520LE

Super I/O

Main

Memory

IDE

SA TA

LAN

Sempron processors

AM D 64 Architect ure enables 32 and 64 bit

computing
Supports Hyper Trans port and Cool=n=Quiet

Support HyperTransport

Supports up to 1GHz Bandwidth

ITE 8716F

Provides the mos t com monly us ed legacy Super

I/O functionalit y.

Low Pin Count Interfac e

Environment Control initiatives,

H/W Monitor

Fan Speed Controller

ITE's "Smart Guardian" function

DDR2 DIMM Slot x 4

Eac h DIMM s upports 256/512/1024/2048 MB

DDR2

Max Memory Capicity 8G

Dual Channel Mode DDR2 memory module

Supports DDR2 533/667/800

Registered DIMM and ECC DIMM is not

supported

Integrated IDE Controller

Ultra DMA 33 / 66 / 100 / 133 B us Mas ter Mode

supports PIO M ode 0~4,

Integrated Serial ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA V ersion 2.0 specification compliant.

Realtek RTL8201CL PHY

10/100 Mb/s aut o negotiation

Half / Full duplex capability

2

Socket AM2

AM D Athl on 64 / At hlon 64 FX / Alt hlon 64 X2 /

Sempron processors

AM D 64 Architect ure enables 32 and 64 bit

computing
Supports Hyper Trans port and Cool=n=Quiet

Support HyperTransport

Supports up to 1GHz Bandwidth

ITE 8716F

Provides the mos t com monly us ed legacy Super

I/O functionalit y.

Low Pin Count Interfac e

Environment Control initiatives,

H/W Monitor

Fan Speed Controller

ITE's "Smart Guardian" function

DDR2 DIMM Slot x 4

Eac h DIMM s upports 256/512/1024/2048 MB

DDR2

Max Memory Capicity 8G

Dual Channel Mode DDR2 memory module

Supports DDR2 533/667/800

Registered DIMM and ECC DIMM is not

supported

Integrated IDE Controller

Ultra DMA 33 / 66 / 100 / 133 B us Mas ter Mode

supports PIO M ode 0~4,

Integrated Serial ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA V ersion 2.0 specification compliant.

Realtek RTL8201CL PHY

10/100 Mb/s aut o negotiation

Half / Full duplex capability

NF520-A2 TE/NF520-A2 SE/NF520-A 2

NF52 0-A 2 TE/N F520-A 2 SE NF520-A2

Realtek ALC662 (NF520-A2 TE) (Ver 6.x)

Realtek ALC861V D (NF520-A2 SE) (Ver 6. x)

Sound

On Board

Connector

Back Panel

I/O

Board S ize 200 mm (W) x 293 mm (L) 200 mm (W) x 293 mm (L)

Special

Feature

OS S upport

Realtek ALC888 (Ver 5.x)

5.1 channels audi o out (V er 6. x)

7.1 channels audi o out (V er 5. x)

Supports HD Audio

PCI s lot x3 PCI s lot x3

PCI Express x16 slot x1 PCI Express x16 slot x1 slots

PCI Express x 1 slot x2 PCI Express x 1 slot x2

Fl oppy c onnect or x1 Fl oppy c onnector x 1

Printer Port connec t or x1 Printer Port connect or x1

IDE C onnector x1 I DE Connector x1

SA TA C onnect or x4 SA TA Connect or x2

Front Panel Connector x1 F ront Panel Connector x1

Front Audio Connector x1 Front Audio Connector x1

CD- in C onnec tor x1 C D-i n Connector x 1

S/PDIF out connector x1 S/PDIF out connector x1

CP U Fa n header x1 C PU F an header x1

Sys tem F an header x1 S ystem Fan hea de r x1

USB connector x3 USB c onnector x2

Chassis open header (optional) x1 Chassis open header (optional) x1

CMOS clear header x1 CMOS clear header x1

Power Connector (24pin) x1 Power Connector (24pin) x1

Power Connector (4pin) x1 Power Connector (4pin) x1

PS/2 Keyboard x1

PS/2 Mouse x1

S e ri a l P ort x 1

LAN port x1

USB Port x4

Audio Jack (Ver 6.x) x3

Audio Jack (Ver 5.x) x6

RAID 0 / 1 / 0+ 1 s upport RAID 0 / 1 s upport

Wi ndows 2000 / XP / VISTA

Biostar Reserves the right to add or remove

support for any OS with or without notice.

Realtek ALC861V D (Ver 6.x)

Realtek ALC888 (Ver 5.x)

5.1 channels audi o out (V er 6. x)

7.1 channels audi o out (V er 5. x)

Supports HD Audio

PS/2 Keyboard x1

PS/2 Mouse x1

S e ri a l P ort x 1

LAN port x1

USB Port x4

Audio Jack (Ver 6.x) x3

Audio Jack (Ver 5.x) x6

Wi ndows 2000 / XP / VISTA

Biostar Reserves the right to add or remove

support for any OS with or without notice.

3

Motherboard Manual

1.4 REAR PANEL CONNECTORS (FOR VER 6.X)

PS /2
Mouse

PS/ 2
Keyboard

COM1 USBX2USBX2

LAN

1.5 REAR PANEL CONNECTORS (FOR VER 5.X)

L ine In /
Surround

Lin e Out

Mic In 1/
B a ss/ C e nter

PS/2
Mouse

PS/2
Keyboard

COM1 USBX2USBX2

Center

Rear

Side

Line In

Line Out

Mic In

LAN

4

NF520-A2 TE/NF520-A2 SE/NF520-A 2

1.6 MOTHERBOARD LAYOUT (NF 520-A2 TE/NF520-A2 SE)

JKBM S1

JCOM1

JPRNT 1

JUSB1

JUSBLAN1

JAUDIO2

(for Ver 5.x )

JAUD IO1

(for Ver 6.x)

LAN

JKBPWR1

JUSBPWR 1

JAUD IOF1

JAT XPWR2

JAT XPWR1

PEX1_1

nForce

520

Socket A M2

JCFAN1

DIMMA1

DIMMB1

SAT A3 SATA4

DIMMB2

DIMMA2

IDE1

Cod ec

J CDIN1

Super I/O

Note: represents the 1■

PEX1_2

JSPDIF_ OUT1

PCI1

PCI 2

PCI3

PEX16_1

st

BAT 1

pin.

JCMOS1

JCI1 (o ptional )

SAT A1 SATA2

JUSBPWR2

JUSB2 JUSB3 JUSB4

FDD1

JSFAN1 JPA NEL1

BI O S

5

Motherboard Manual

1.7 MOTHERBOARD LAYOUT (NF520-A2)

JKBMS1

JCOM1

JPRNT 1

JUSB1

JUSBLAN1

JAUDIO2

(for Ver 5.x )

JAUD IO1

(for Ver 6.x)

LAN

JKBPWR1
(O ptio nal)

JUSBPWR1
(O ptio nal)

JAUD IOF1

JAT XPWR2

JAT XPWR1

PEX1_1

nForce

520LE

Socket A M2

JCFAN1

DIMMA1

DIMMB1

DIMMB2

DIMMA2

IDE1

6

Cod ec

J CDIN1

Super I/O

BIOS

(For Ver 6. 0)

Note: represents the 1■

PEX1_2

JSPDIF_ OUT1

PCI1

PCI 2

PCI3

PEX16_1

st

BAT 1

pin.

JUSBPWR 2(Optional)

JCMOS1

JCI1 (o ptional )

SAT A1 SATA2

(F or Ver 6.1 or above)

JUSB2 JUSB3

FDD1

JSFAN1 JPA NEL1

BI O S

NF520-A2 TE/NF520-A2 SE/NF520-A 2

CHAPTER 2: HARDWARE INST ALL ATION

2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Remove the socket protection cap.

Step 2: Pull the lever toward direction A from the socket and then raise the

lever up to a 90-degree angle.

Step 3: Look for the white triangle on socket, and the gold triangle on

CPU should point forwards this white triangle. The CPU will fit
only in the correct orientation.

7

Motherboard Manual

Step 4: Hold the CPU down firmly, and then close the lever toward direct

B to complete the installation.

Step 5: Put the CPU Fa n on the CPU and buckle i t. Connect the CPU

FAN power cable to the JCFAN1. This completes the installation.

8

NF520-A2 TE/NF520-A2 SE/NF520-A 2

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to
pin#1.

JCFAN1: CPU Fa n Header

14

JSFAN 1: System F a n H ea der

Pin

Assignment

1 Ground
2 +12V
3 FAN RPM rate

sense

4

Smart Fan
Control

Pin

Assignment

1 Ground
2 +12V
3 FAN RPM rate

sense

13

Note:

The J CFAN 1 su pp or ts 4-pi n head connec tor, and JSF AN 1s uppor ts 3- pin hea d c onnect or.
When co nnecting wit h wir es o nto c on nect or s, please note t hat t he r e d wire i s th e p ositive
and sho uld be c onnec ted to pin#2, an d t he bl ac k wire i s Gr oun d an d should be

conn ecte d t o GND .

9

Motherboard Manual

2.3 INSTALLING SYSTEM MEMORY

A. Me mo ry Module s

DIMMA1

DIMMB1

DIMMB2

DIMMA2

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

10

NF520-A2 TE/NF520-A2 SE/NF520-A 2

B. Memory Capacity

DI MM Socket

Location

DIMMA1 256MB/512MB/1024MB/2048MB

DIMMB1 256MB/512MB/1024MB/2048MB

DIMMA2 256MB/512MB/1024MB/2048MB

DIMMB2 256MB/512MB/1024MB/2048MB

DDR2 Module

To t al Me mo r y

Size

Max i s 8GB.

C. Dual Channel Memory installatio n

To trigger the Dual Channel function of the motherboard, the memory
module must meet the following requirements:

Install memory module of the same density in pairs, shown in the
following table.

Du al Channel Statu s

Enabled O O X X

Enabled X X O O

Enabled O O O O

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or
x16)

DIMMA 1

DIMMB1 DIMMA2 DIMMB2

11

Motherboard Manual

2.4 CONNECTORS AND SLOTS

FDD1: Flo ppy Disk Connec tor

The motherboard prov ides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk ty pes . This connect or supports the
prov ided f loppy drive ribbon c able.

IDE1: Hard Disk Connector

The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO
Mode 0~4, Bus Master, and U ltra DMA 33/66/100/133 f unctionality.

The IDE connector c an connect a master and a slave drive, so y ou c an connect
up to two hard disk driv es.

2

1

21

34

33

3940

12

NF520-A2 TE/NF520-A2 SE/NF520-A 2

PEX16_1: PC I-Express x16 Slot

- PCI-Express 1.0a c ompliant.

- Maximum t heoretical realized bandwidt h of 4GB/s simultaneously per

direction, f or an aggregat e of 8GB/s totally.

PEX1_1/ PEX1_2: PCI-Express x1 Slots

- PCI-Express 1.0a c ompliant.

- Data t ransf er bandwidth up to 250MB/s per direction; 500MB/s in total.

- PCI-Express supports a raw bit-rate of 2.5Gb/s on t he data pins.

- 2X bandwidth over the traditional PCI architecture.

PEX1_1

PEX1_2

PEX16_1

PCI1 /PCI2/PCI3: Peripheral Component Interconnect Slots

This motherboard is equipped with 3 standard PCI slots. PCI stands f or
Peripheral Component Interconnect, and it is a bus st andard for expansion

cards. This PCI slot is des ignated as 32 bits.

PCI1

PCI2

PCI3

13

Motherboard Manual

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is

“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETT INGS

JPANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep
button, speaker Connection. It allows user to connec t the PC case’s f ront panel

switch functions.

PWR_L ED

SLP

9
1

SPK

++

HL E D

+

On/ Off

-

-

RST

16
8

14

Pin Assignment Function Pin Assignment Function

1 +5V 9 Sleep control
2 N/A 10 Ground
3 N/A 11 N/A N/A
4 Speaker

5 HDD LED (+) 13 Power LED (+)

6 HDD LED (-)
7 Ground 15 P ower button
8 Reset control

Speaker
Connector

Hard dri ve
LED

Reset button

12 Power LED (+)

14 Power LED (-)

16 Ground

Sleep button

Power LED

Power-on button

NF520-A2 TE/NF520-A2 SE/NF520-A 2

ATX Power Source Connect or: JAT X PWR1

JATXPWR1 allows us er to connect 24-pin power connector on the ATX power
supply.

12

1

Pin Assignment Pin Assignment

24

13

1 +3.3V 13 + 3.3V
2 +3.3V 14 - 12V
3 Gr oun d 15 Gr oun d
4 +5V 16 PS_ON
5 Gr oun d 17 Gr oun d
6 +5V 18 Ground
7 Gr oun d 19 Gr oun d
8 PW_ OK 20 N C

9 Stand b y Volt ag e+5V 21 + 5V
10 +12V 22 + 5V
11 + 12V 23 + 5V
12 +3.3V 24 Gr oun d

JATXPW R2: ATX Powe r S ource Con ne ctor

By connect ing this connector, it will provide +12V to CPU power c ircuit.

2

1

43

Pin

Assignment

1 +12V
2 +12V
3 Ground
4 Ground

Note:

Befor e p ower on t he s yst e m, pl eas e ma ke sure th at b oth J ATXP WR 1 and JAT XP WR 2
conn ectors have b ee n pl ug g ed- in.

15

Motherboard Manual

JUS B 2/ JUSB3/ JUSB4: Header s for U SB 2. 0 P orts at F ront Pa n el
(JUSB4 i s onl y for NF520-A2 T E/ NF520- A2 SE )

This header allows us er to connect additional USB c able on the PC f ront panel,
and also can be c onnected with internal USB devices, like USB card reader.

JUSB2 JU SB3 JUSB4

(JUSB4 i s only for NF 520- A2 TE/

NF520-A 2 S E)

2

10

1

9

SATA1/SATA2/S ATA3/SATA4: Serial ATA Connectors
(SATA3 an d SATA4 are only for NF520-A2 TE/NF520-A2 SE)

The motherboard has a PCI to SATA Cont roller with 2 channels SATA interf ace,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Pin

S ATA 3 S ATA 4

(On ly fo r NF520-A2 TE/

N F520-A2 SE)

7

4

1

1 Ground
2 TX +
3 TX ­4 Ground
5 RX­6 RX+
7 Ground

Assignment

Pin

1 +5V (fused)
2 +5V (fused)
3 USB­4 USB­5 USB+
6 USB+
7 Ground
8 Ground

9 Key

10 NC

Assignment

16

SATA1 SATA2

NF520-A2 TE/NF520-A2 SE/NF520-A 2

JAUDIOF1: Front Panel Audio Header

This header allows us er to connect t he front audio output cable with the PC f ront
panel. This header allows only HD audio front panel c onnector; AC’97 c onnector

is not accept able.

Pin

Assignment

1 Mi c Left in
2 Ground
3 Mi c Right in

12

910

4 GPIO
5 Right line i n
6 Jack Sense
7 Front Sense
8 Key
9 Left line in

10 Jack Sense

JCDIN1: CD-R OM A ud i o-in Connector

This connector allows user to connect the audio source f rom the v ariaty dev ic es,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV t urner card etc.

Pin

Assignment

1 Left Channel

Input
2 Ground
3 Ground
4 Right Channel

14

Input

17

Motherboard Manual

JSPDIF_OU T1 : Digital Audi o-out Conn e ctor

This connector allows user t o connect the PCI brac ket SPDIF output header.

Pin

1 +5V
2 SPDIF_OUT
3 Ground

13

JUS BPW R1/JUSBPW R2: Power So u r ce Heade rs f o r USB P ort s
(Optional for NF520 -A2 )

Pin 1-2 C lose:

JUSBPWR1: +5V for USB port s at JUSB1/JUSBLAN1.
JUSBPWR2: +5V for USB port s at f ront panel (JUSB2/JUSB3/JUSB4).

Pin 2-3 C lose:

JUSBPWR1: +5V STB for U SB ports at JUSB1/JUSBLAN1.
JUSBPWR2: +5V STB f or U SB ports at f ront panel (JU SB2/JUSB3/JUSB4).

Assignment

18

3

1

JUSBPWR1

13

JUSBPWR2

3

31

1

3

1

Pin 1-2 close

1

Pin 2-3 close

3

NF520-A2 TE/NF520-A2 SE/NF520-A 2

JKBPWR1: Power Source Header for PS/2 Keyboard and Mo use
(Optional for NF520 -A2 )

3

1

31

Pin 1-2 Close

+5V for PS/2 keyboard and
mouse.

31

Pin 2-3 close

+5V STB for PS/2 keyboard and
mouse.

JCMOS 1 : C l ea r CMO S H e a der

By placing the jumper on pin2-3, it allows user to rest ore the BIOS safe setting
and the CMOS data, please carefully f ollow the procedures to avoid damaging

the motherboard.

13

Pin 1-2 Close:

Normal Operation (default).

13

13

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait f or f ive seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Reset y our desired password or c lear the CMOS data.

19

Motherboard Manual

JCI1: Chassis Open Header (Optional)

This connector allows sy stem to monitor PC case open status. If the signal has
been triggered, it will rec ord to the C MOS and show the message on next

boot-up.

JPRNT1: Printer Port Con nector

This header allows y ou to connector print er on the PC.

12

12

Pin

Assignment

1 Case open signal
2 Ground

20

25

Pin Assignment Pin Assignment

1 -Strobe 14 Ground
2 -ALF 15 Data 6

3 Data 0 16 Ground
4 -Error 17 Data 7

5 Data 1 18 Ground
6 -Init 19 -ACK

7 Data 2 20 Ground
8 -Scltin 21 Busy

9 Data 3 22 Ground

10 Ground 23 PE
11 Data 4 24 Ground

12 Ground 25 SCLT
13 Data 5 26 Key

NF520-A2 TE/NF520-A2 SE/NF520-A 2

CHAPTER 4: RAID FUNCTIONS

4.1 OPERATION SYSTEM

Supports Windows XP, W indows 2000 Professional, and Windows Vista.

4.2 RAID ARRAYS

NVRAID supports t he f ollowing ty pes of RAID array s:

RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for

many applications.

RAID 1: RAID 1 defin es techniques for mirrori ng data.
RAID 0+1: RAID 0+1 combines the techniques used in RAID 0 and RAID 1.

4.3 HOW RAID WORKS

RAID 0:

The controller “ strip es” d ata across multiple dri ves in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple

drives in parallel . The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and o ffers h igh bandwidth.

Fea tures and Be nefits

 Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the

platform.

 Uses: Intended for non-critical data requiring high data throughput , or any

env ironment that does not require f ault toleranc e.

 Benefits: prov ides increased data throughput, espec ially f or large files. No

capacity loss penalty f or parity.

 Drawbacks: Does not deliver any f ault tolerance. If any drive in t he array

f ails, all data is lost.

 Fault Tolerance: No.

Block 1
Bl oc k 3

Bl oc k 5

Block 2
Bl oc k 4

Bl oc k 6

21

Motherboard Manual

RAID 1:

Every read and write is actually carried out in parallel across 2 disk d riv es in a RAID 1
array system. The mirrored (backup) copy o f th e data can reside on the s ame di sk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the

active volume or drive is co rrupted or b ecomes unavailable b ecause of a hardw are failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic

backup that eliminates tedious manual backups to more expensive and less reliable
me d i a .

Fea tures and Be nefits

 Drives: Minimum 2, and maximum is 2.
 Uses: RAID 1 is ideal for small databases or any other applicat ion that

requires f ault tolerance and minimal capacity.

 Benefits: Prov ides 100% data redundancy. Should one driv e f ail, the

controller switc hes to the ot her drive.

 Drawbacks: Requires 2 driv es for the storage space of one driv e.

Perf ormance is impaired during driv e rebuilds.

 Fault Tolerance: Yes.

22

Blo ck 1

Block 2
Block 3

Block 1

Block 2
Block 3

NF520-A2 TE/NF520-A2 SE/NF520-A 2

RAID 0+1: (Only for NF520-A2 TE/NF520-A2 SE)

RAID 0 drives can be mirrored using RAID 1 techniques. Resulting in a RAID 0+1
solution for improved performance plus resiliency.

Fea tures and Be nefits

 Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
 Benefits: Optimizes for both fault toleranc e and perf orm ance, allowing for

automatic redundancy. May be simultaneously us ed with other RAID lev els
in an array, and allows for spare disks.

 Drawbacks: Requires twice the available disk space f or data redundancy,

the same as RAID level 1.

 Fault Tolerance: Yes.

Block 1
Block 3

Block 5

Block 2
Block 4

Block 6

Block 1

Block 3
Block 5

※ For more detailed setup information, please refer to the Driver CD, or go to

http://www.nvidia.c om/object/IO_28159.htm l to download the NVIDIA RAID User’s Guide.

Block 2
Block 4

Block 6

23

Motherboard Manual

CHAPTER 5: USEFUL HE LP

5.1 DRIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system

performance.

You will see the following window after you insert the CD

The setup guid e will auto detect your motherboard and operating system.

Note:

If this win dow di dn’t sho w up after you i ns ert th e Driver CD , pl e ase use fil e bro ws er to
locate and e xecute th e fil e SETU P.EXE un der yo ur o ptical dr ive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.

Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title

to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat R eader to open the manual file. Please download the lat est version
of Acrob at Re ader soft ware fro m

http://www.adobe.com/products /a crobat/readstep2.html

24

NF520-A2 TE/NF520-A2 SE/NF520-A 2

5.2 AWARD BIOS BEEP CODE

Beep Sound Meanin g

One long beep f ollowed by two s hort
beeps

High-low siren sound CPU overheat ed

One Short beep when system boot-up No error found during POST
Long beeps every other second No DRAM detec ted or install

Video card not f ound or v ideo c ard
memory bad

System will shut down automat ically

5.3 EXT RA INFORMATION

CPU Overheated

If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not

power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection
function.

1. Remove the power cord from power supply for seconds.
2 . Wa i t f o r se c o nd s.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See “Close CMOS Header: JCMOS1” section)

2 . Wa i t f o r se c o nd s.

3. Powe r on the syste m ag ai n.

25

Motherboard Manual

e

5.4 TROUBLESHOOTING

Probable Solution

1. No power to the system at all
Power light don’t illuminat e, f an
inside power s upply does not turn

on.

2. Indicator light on key board does
not turn on.

System inoperativ e. Keyboard lights
are on, power indic ator lights are lit,

and hard driv e is s pinning.

System does not boot from hard disk
driv e, can be booted f rom opt ical drive.

System only boots f rom optical driv e.
Hard disk can be read and applications
can be used but booting from hard disk

is impossible.

Screen mess age says “Invalid
Configuration” or “CMOS Failure.”

Cannot boot system aft er installing
second hard driv e.

1. Make sure power cable is
securely plugged in.

2. Replace cable.

3. Contact tec hnical s upport.

Using even pressure on both ends of
the DIMM, press down firm ly until the

module snaps into place.

1. Check cable running from disk to
disk cont roller board. Make sure

both ends are s ecurely plugged
in ; c hec k t h e d r iv e ty p e i n t h e
standard CMOS setup.

2. Backing up the hard drive is
extremely import ant. All hard

disks are capable of breaking
down at any time.

1. Back up data and applications
files.

2. Ref ormat the hard driv e.
Re-install applications and data

using backup disks.

Review system’s equipment. Make sur
correct inf ormation is in setup.

1. Set master/slave jumpers
correctly.

2. Run SETUP program and select
correct driv e types. C all the drive

manufacturers f or compatibility
with other drives.

26

NF520-A2 TE/NF520-A2 SE/NF520-A 2

This page is intentionally left blank.

27

Motherboard Manual

APPENDENCIES: SPEC I N OTHER LA NGUAGE

GERMAN

NF 520- A2 TE/N F520- A 2 SE NF520-A2

Sockel AM2

AM D Athl on 64 / At hlon 64 FX / Athlon 64 x2/

CPU

FSB

Chi ps atz nForce 520 nForce 520LE

Super E/A

Arbeitsspei che

r

IDE

SA TA II

LAN

Sempron Prozessoren

Die A MD 64-Architektur unterstützt eine 32-Bit-

und 64-Bit-Datenverarbeitung

Unterstützt Hyper Transport und Cool’n’Quiet

Unterstützt HyperTransport mit einer

Bandbreite von bis zu 1 GHz

ITE 8716F

Bi etet die häufig verwendeten alten Super

E/A-Funktionen.

Low Pin Count-Schnittstell e

Umgebungs kontrolle,

Hardw are-Überwachung

Lüfterdrehz ahl-Controller

"Smart Guardi an"-Funktion von ITE

DDR2 DIMM-Steckplätze x 4

Jeder DIMM unterst ützt 256MB/512M B/1GB/

2GB DDR 2.

M ax. 8GB A r beit ss peiche r

Dual-Kanal DDR2 Speichermodul

Unt erstützt DDR2 533 / 667 / 800

registrierte DIMMs. ECC DIMMs werden nicht

unterstützt.

Integrierter IDE-Controller

Ultra DMA 33 / 66 / 100 / 133 B us

Master-Modus

Unterstützt PIO-Modus 0~4,

I nt e gri ert e r S e ri al ATA -C on tr o ll e r

Datentransferrate bis zu 3Gb/s

Konform mit der SATA-Spezifikation Version

2.0.

Realtek RTL8201CL PHY

10 / 100 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

28

Sockel AM2

AM D Athl on 64 / At hlon 64 FX / Athlon 64 x2/

Sempron Prozessoren

Die A MD 64-Architektur unterstützt eine 32-Bit-

und 64-Bit-Datenverarbeitung

Unterstützt Hyper Transport und Cool’n’Quiet

Unterstützt HyperTransport mit einer

Bandbreite von bis zu 1 GHz

ITE 8716F

Bi etet die häufig verwendeten alten Super

E/A-Funktionen.

Low Pin Count-Schnittstell e

Umgebungs kontrolle,

Hardw are-Überwachung

Lüfterdrehz ahl-Controller

"Smart Guardi an"-Funktion von ITE

DDR2 DIMM-Steckplätze x 4

Jeder DIMM unterst ützt 256MB/512M B/1GB/

2GB DDR 2.

M ax. 8GB A r beit ss peiche r

Dual-Kanal DDR2 Speichermodul

Unt erstützt DDR2 533 / 667 / 800

registrierte DIMMs. ECC DIMMs werden nicht

unterstützt.

Integrierter IDE-Controller

Ultra DMA 33 / 66 / 100 / 133 B us

Master-Modus

Unterstützt PIO-Modus 0~4,

I nt e gri ert e r S e ri al ATA -C on tr o ll e r

Datentransferrate bis zu 3Gb/s

Konform mit der SATA-Spezifikation Version

2.0.

Realtek RTL8201CL PHY

10 / 100 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

NF520-A2 TE/NF520-A2 SE/NF520-A 2

NF 520- A2 TE/N F520- A 2 SE NF520-A2

Realtek ALC662 (NF520-A2 TE) (Ver 6.x)

Realtek ALC861V D (NF520-A2 SE) (Ver 6. x)

Audio-Codec

Onboard-Ansc

hluss

Rückseiten-E/

A

Platinengröße. 200 mm (B) X 293 mm (L) 200 mm (B) X 293 m m (L)

Sonderfunktio

nen

OS-Unterstütz

ung

Realtek ALC888 (Ver 5.x)

5.1-Kanal-Audioausgabe (V er 6. x)

7.1-Kanal-Audioausgabe (V er 5. x)

Unterstützt High-Definition Audio

PCI-Steckplatz x3 PCI-Steckplatz x3
PCI Express x16 Steckplatz x1 PCI Express x16 Steckplatz x1 Steckplätze

PCI Express x 1-Stec kplatz x2 PCI Express x 1-Steckplatz x2

Diske ttenlaufwerkanschluss x1 Di skett enlaufw e rkansc hluss x1

Druc ker anschluss A nschl uss x1 Dr uc keranschluss Ansc hl uss x1

IDE-Ansc hl uss x1 IDE-Ansc hl uss x1

SATA-Anschluss x4 SATA-Anschluss x2

Fronttafelanschluss x1 Fronttafelanschluss x1

Fr ont-Audioansc hl uss x1 F ront-Audi oansc hluss x1

CD-I N-A nschluss x1 CD-I N-A nschluss x1

S/PDIF- Ausgangsanschluss x1 S/PDIF- Ausgangsanschluss x1

CPU-Lüfter-Sockel x1 CPU-Lüfter-Sockel x1

System-Lüfter-Sockel x1 System-Lüfter-Sockel x1

"CMOS löschen"-Soc kel x1 "C MOS löschen"-Sockel x1

"Gehäuse offen"-Soc kel(optional) x1 "Gehäuse offen"-S ockel(optional ) x1

US B-Ansc hl uss x3 US B-Ansc hl uss x2

Stromanschluss (24-polig) x1 Stromanschluss (24-polig) x1

Stromanschluss (4-polig) x1 Stromanschluss (4-polig) x1

PS/2-Tastatur x1

PS/2-Maus x1

Serieller A nsc hl uss x1

LAN-Anschluss x1

US B-Ansc hl uss x4

Audioanschluss (Ver 6.x) x3

Audioanschluss (Ver 5.x) x6

Unterstützt RAID 0 / 1 / 0+1 Unterstützt RAID 0 / 1

Windows 2K / XP / VISTA

Biostar behält sich das Recht vor, ohne

Ankündigung di e Unt erstützung für ein

Betriebssystem hinz uz ufügen oder zu

entfernen.

Realtek ALC861V D (Ver 6.x)

Realtek ALC888 (Ver 5.x)

5.1-Kanal-Audioausgabe (V er 6. x)

7.1-Kanal-Audioausgabe (V er 5. x)

Unterstützt High-Definition Audio

PS/2-Tastatur x1

PS/2-Maus x1

Serieller A nsc hl uss x1

LAN-Anschluss x1

US B-Ansc hl uss x4

Audioanschluss (Ver 6.x) x3

Audioanschluss (Ver 5.x) x6

Windows 2K / XP / VISTA

Biostar behält sich das Recht vor, ohne

Ankündigung di e Unt erstützung für ein

Betriebssystem hinz uz ufügen oder zu

entfernen.

29

Motherboard Manual

FRANCE

NF52 0-A 2 TE /NF 520-A 2 S E NF520-A2

Socket AM2

Pr ocess eurs AM D At hlon 64 / At hlon 64 FX /

UC

Bus frontal

Chi ps et nForce 520 nForce 520LE

Super E/S

Mémoire

princ ipal e

IDE

SA TA II

LAN

Athlon 64 x2/ Sempron

L'architecture AMD 64 permet le calcul 32 et 64

bits

Prend en charge Hyper Transport et Cool’n’Quiet

Prend en charge Hyper Transport jusqu'à une

bande passante de 1G

ITE 8716F

Four nit la fonctionnalit é de Super E/S

patrimoniales la plus utilisée.

Interface à faible compte de broches

Initiatives de contrôle environnementales,

Moniteur de matériel

Contrôleur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Fentes DDR2 DIMM x 4

Chaque DIMM prend en c harge des DDR2 de

256/512 Mo et 1Go/2Go

Capacité mémoire maximale de 8 Go

Modul e de mémoi re DDR2 à mode à double voie

Prend en char ge l a DDR2 533 / 667 / 800

Les DIMM à registres et DIMM avec code

correc teurs d'erreurs ne sont pas prises en

charge

Contrôleur IDE i ntégré

Mode principale de B us Ultra DMA 33 / 66 / 100 /

133

Prend en charge le mode PIO 0~4,

Cont r ôl eur Se rial ATA intégré :

Taux de transfert jusqu'à 3 Go/s.

Conforme à la spécification SATA Version 2.0

Realtek RTL8201CL PHY

10 / 100 Mb/s négociation automat ique

Half / Full duplex capability

Socket AM2

Pr ocess eurs AM D At hlon 64 / At hlon 64 FX /

Athlon 64 x2/ Sempron

L'architecture AMD 64 permet le calcul 32 et 64

bits

Prend en charge Hyper Transport et Cool’n’Quiet

Prend en charge Hyper Transport jusqu'à une

bande passante de 1G

ITE 8716F

Four nit la fonctionnalit é de Super E/S

patrimoniales la plus utilisée.

Interface à faible compte de broches

Initiatives de contrôle environnementales,

Moniteur de matériel

Contrôleur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Fentes DDR2 DIMM x 4

Chaque DIMM prend en c harge des DDR2 de

256/512 Mo et 1Go/2Go

Capacité mémoire maximale de 8 Go

Modul e de mémoi re DDR2 à mode à double voie

Prend en char ge l a DDR2 533 / 667 / 800

Les DIMM à registres et DIMM avec code

correc teurs d'erreurs ne sont pas prises en

charge

Contrôleur IDE i ntégré

Mode principale de B us Ultra DMA 33 / 66 / 100 /

133

Prend en charge le mode PIO 0~4,

Cont r ôl eur Se rial ATA intégré :

Taux de transfert jusqu'à 3 Go/s.

Conforme à la spécification SATA Version 2.0

Realtek RTL8201CL PHY

10 / 100 Mb/s négociation automat ique

Half / Full duplex capability

30

NF520-A2 TE/NF520-A2 SE/NF520-A 2

NF52 0-A 2 TE /NF 520-A 2 S E NF520-A2

Codec audio

Connecteur
embarqué

E/S du
panneau
arrière

Dim ensions
de la c arte

Fonctionnali
tés
spéciales

Support SE

Realtek ALC662 (NF520-A2 TE) (Ver 6.x)
Realtek ALC861V D (NF520-A2 SE) (Ver 6. x)
Realtek ALC888 (ver 5.x)
Sortie audio à 5. 1 voies (Ver 6. x)
Sortie audio à 7. 1 voies (Ver 5. x)
Prise en charge de l'audio haute définition

Fente PCI x3 Fente PCI x3
Slot PCI Express x16 x1 Slot PCI Express x16 x1 Fentes

Slot PCI Express x 1 x2 Slot PCI Express x 1 x2

Connecteur de disquett e x1 Connect eur de disquette x1
Connecteur de Port d'imprimante x1 Connecteur de Port d'imprimante x1
Connecteur IDE x1 C onnect eur IDE x1
Connec t e ur SATA x4 C onnect eur SATA x2
Connecteur du panneau avant x1 Connect eur du panneau avant x1
Connecteur Audio du panneau avant x1 Connecteur Audi o du panneau avant x1
Connecteur d'entrée CD x1 Connect eur d'entrée CD x1
Connecteur de sortie S/PDIF x1 Connecteur de sortie S/PDIF x1
Embase de ventilateur UC x1 Em base de ventil ateur UC x1
Embase de ventilateur s ystème x1 Embase de ventilateur système x1
Embase d'effacem ent CMOS x1 Em base d'effacement CMO S x1
Embase d' ouverture de châssis
(en option) x1
Connecteur USB x3 Connecteur USB x2
Connecteur d'alimentation x1
(24 broches)
Connecteur d'alimentation x1
(4 broches)

Clavier PS/2 x1
Souris PS/2 x1
Port série x1
Port LAN x1
Port USB x4
Fiche audio (V er 6. x) x3
Fiche audio (V er 5. x) x6

200 mm (l) X 293 mm (H) 200 mm (l) X 293 mm (H)

Prise en c harge RAID 0 / 1 / 0+1 Prise en c harge RAID 0 / 1

Windows 2K / XP / VISTA
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans préavis.

Realtek ALC861V D (Ver 6.x)
Realtek ALC888 (ver 5.x)
Sortie audio à 5. 1 voies (Ver 6. x)
Sortie audio à 7. 1 voies (Ver 5. x)
Prise en charge de l'audio haute définition

Embase d' ouverture de châssis
(en option) x1

Connecteur d'alimentation x1
(24 broches)
Connecteur d'alimentation x1
(4 broches)

Clavier PS/2 x1
Souris PS/2 x1
Port série x1
Port LAN x1
Port USB x4
Fiche audio (V er 6. x) x3
Fiche audio (V er 5. x) x6

Windows 2K / XP / VISTA
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans préavis.

31

Motherboard Manual

pp

ITALIAN

NF52 0-A 2 TE /NF 520-A 2 S E NF520-A2

Socket AM2
Processori AMD Athlon 64 / Athlon 64 FX /

CPU

FSB

Chi ps et nForc e 520 nForce 520LE

Super I/O

Memoria
princi pale

IDE

SATA II

LAN

Codec
audio

Athlon 64 x2/ Sempron
L’architettura AMD 64 abilita la

computazione 32 e 64 bit
Suppor to di Hyper Tra nsport e Cool’ n’Qui et

Suppor to di Hyper Transport fi no a 1G di
larghezza di banda

ITE 871 6F
Fornisce le funzio nalità legacy Super I/O

usate più comunemente.
Interfaccia LPC (Low Pin Count)

Funzioni di co ntrollo dell’ambiente:
Monitoraggio hardware

Controller velocità ventolina
Funz ione "Smart G uardi an" di I TE

Al loggi DIMM DDR 2 x 4
Ci as c un DIM M s up po rt a D DR 2 2 56/ 51 2MB e

1GB/2GB
Capacità massima della memoria 8GB

Modulo di mem oria DDR2 a can ale dop pio
Supporto di DDR2 533 / 667 / 800

DIMM registrati e DIMM ECC non sono
supportati
Controller IDE integrato

Modalità Bus Master Ultra DMA 33 / 66 /
100 / 13 3

Suppor to modalità PIO Mode 0- 4
Controller Serial ATA integrato
Velocit à di tras ferimento dei dat i fi no a 3

Gb/s .
Compatibile specifiche SATA Versione 2.0.
Realtek RTL8201CL PHY

Negozi az ione automati ca 10 / 100 Mb /s
Capacità Half / Full Duplex
Realtek ALC662 (NF520-A2 TE) (Ver 6.x)

Realtek ALC861V D (NF520-A2 SE) (Ver 6. x)
Realtek ALC 888 (Ver 5. x)

Us c ita audio 5. 1 ca nali (Ver 6.x)
Us c ita audio 7. 1 ca nali (Ver 5.x)

Suppor to au dio High- Defi nition (HD )

Socket AM2
Processori AMD Athlon 64 / Athlon 64 FX /

Athlon 64 x2/ Sempron
L’architettura AMD 64 abilita la

computazione 32 e 64 bit
Suppor to di Hyper Tra nsport e Cool’ n’Qui et

Suppor to di Hyper Transport fi no a 1G di
larghezza di banda

ITE 871 6F
Fornisce le funzio nalità legacy Super I/O

usate più comunemente.
Interfaccia LPC (Low Pin Count)

Funzioni di co ntrollo dell’ambiente:
Monitoraggio hardware

Controller velocità ventolina
Funz ione "Smart G uardi an" di I TE

Al loggi DIMM DDR 2 x 4
Ciascun DIMM su

1GB/2GB
Capacità massima della memoria 8GB

Modulo di mem oria DDR2 a can ale dop pio
Supporto di DDR2 533 / 667 / 800

DIMM registrati e DIMM ECC non sono
supportati
Controller IDE integrato

Modalità Bus Master Ultra DMA 33 / 66 /
100 / 13 3

Suppor to modalità PIO Mode 0- 4
Controller Serial ATA integrato
Velocit à di tras ferimento dei dat i fi no a 3

Gb/s .
Compatibile specifiche SATA Versione 2.0.
Realtek RTL8201CL PHY

Negozi az ione automati ca 10 / 100 Mb /s
Capacità Half / Full Duplex

Realtek ALC 861V D (Ver 6.x)
Realtek ALC 888 (Ver 5. x)

Us c ita audio 5. 1 ca nali (Ver 6.x)
Us c ita audio 7. 1 ca nali (Ver 5.x)

Suppor to au dio High- Defi nition (HD )

ort a DDR 2 256/51 2MB e

32

NF520-A2 TE/NF520-A2 SE/NF520-A 2

NF52 0-A 2 TE /NF 520-A 2 S E NF520-A2

Alloggio PCI x3 Alloggio PCI x3

Alloggi

Connettori
su scheda

I/O
pannello
posteriore

Dim ens ion
i scheda
Caratterist
iche
speciali

Sistemi
operativi
supportati

Al loggio PCI Expr es s x1 6 x1 Alloggio PCI Expres s x1 6 x1
Al loggio PCI Expr es s x1 x2 All oggio PCI Ex press x1 x2

Connettore flo ppy x1 Connett ore flo ppy x1
Connettore Port a s t am pa nte x1 Connet tore Por ta stampa nte x1

Connettore IDE x1 Connettore IDE x1
Connettore SATA x4 Connet tore SATA x2
Connettore pannello fro ntale x1 Connet tore pa nnello fro ntale x1
Connettore audio frontale x1 Connettore audio frontale x1
Connettore CD-in x1 Connettore CD-in x1
Connettore outp ut SPDIF x1 Connettore outp ut SPDIF x1
Collettore ventolina CPU x1 Collettore ventolina CPU x1
Collettore ventolina sistema x1 Collettore ventolina sistema x1
Collettore cancellazione CMOS x1 Collettore cancellazione CMOS x1
Collettore apertura telaio
(optional) x1
Connettore USB x3 C onnet t ore USB x2
Connettore alimentazione x1
(24 pin)
Connettore alimentazione x1
(4 pin)

Ta s t ie r a P S / 2 x 1
Mouse PS/2 x1
Porta seriale x1
Porta LAN x1
Porta USB x4
Connettore audio (Ver 6.x) x3
Connettore audio (Ver 5.x) x6

200 mm (lar ghezz a) x 2 93 m m (altezza) 200 mm (lar ghezza) x 293 mm (alt ezz a)

Support o RAID 0 / 1 / 0+1 Support o RAID 0 / 1

Windows 2K / XP / VISTA
Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
operativo se nza pre avviso.

Collettore apertura telaio
(optional) x1

Connettore alimentazione x1
(24 pin)
Connettore alimentazione x1
(4 pin)

Ta s t ie r a P S / 2 x 1
Mouse PS/2 x1
Porta seriale x1
Porta LAN x1
Porta USB x4
Connettore audio (Ver 6.x) x3
Connettore audio (Ver 5.x) x6

Windows 2K / XP / VISTA
Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
operativo se nza pre avviso.

33

Motherboard Manual

SPANISH

NF52 0-A 2 TE /NF 520-A 2 S E NF520-A2

CPU

FSB

Conjunto de
chips

Súper E/S

Memoria
princ ipal

IDE

SA TA II

Red Local

Códecs de
sonido

Conector AM2
Procesadores AMD Athlon 64 / A thlon 64 FX /

Athlon 64 x2/ Sempron
La arquitectura AMD 64 permite el procesado de

32 y 64 bits
Soporta las tecnologías Hyper Transport y

Cool’n’Quiet
Admite HyperTransport con un ancho de banda

de hasta 1G

nForce 520 nForce 520L E

ITE 8716F
Le ofrece l as funcionali dades heredadas de uso

más común Súper E/S.
Interfaz de cuenta Low Pin

Iniciativas de control de entorno,
Monitor hardware

Controlador de velocidad de ventilador
Función "Guardia inteligente" de ITE

Ranuras DIMM DDR2 x 4
Cada DIMM admit e DDR de 256/512M B y

1GB/2GB
Capacidad máxima de memor ia de 8GB

Módul o de memoria DDR 2 de canal Dobl e
Admite DDR2 de 533 / 667 / 800

No admite DIMM registrados o DIMM
compatibles con ECC
Controlador IDE i nt egrado

Modo bus maestro Ultra DMA 33 / 66 / 100 / 133
Soporte los Modos PIO 0~4,
Controlador ATA S erie Integrado

Tasas de transferencia de hasta 3 Gb/s.
Compatible con la versión SATA 2. 0.
Realtek RTL8201CL PHY

Negociación de 10 / 100 Mb/s
Funciones Hal f / Full dúplex
Realtek ALC662 (NF520-A2 TE) (Ver 6.x)

Realtek ALC861V D (NF520-A2 SE) (Ver 6. x)
Realtek ALC888 (Ver 5.x)

Salida de soni do de 5.1 canales (Ver 6.x)
Salida de soni do de 7.1 canales (Ver 5.x)

Soporte de sonido de A lta Definición

Conector AM2
Procesadores AMD Athlon 64 / A thlon 64 FX /

Athlon 64 x2/ Sempron
La arquitectura AMD 64 permite el procesado de

32 y 64 bits
Soporta las tecnologías Hyper Transport y

Cool’n’Quiet
Admite HyperTransport con un ancho de banda

de hasta 1G

ITE 8716F
Le ofrece l as funcionali dades heredadas de uso

más común Súper E/S.
Interfaz de cuenta Low Pin

Iniciativas de control de entorno,
Monitor hardware

Controlador de velocidad de ventilador
Función "Guardia inteligente" de ITE

Ranuras DIMM DDR2 x 4
Cada DIMM admit e DDR de 256/512M B y

1GB/2GB
Capacidad máxima de memor ia de 8GB

Módul o de memoria DDR 2 de canal Dobl e
Admite DDR2 de 533 / 667 / 800

No admite DIMM registrados o DIMM
compatibles con ECC
Controlador IDE i nt egrado

Modo bus maestro Ultra DMA 33 / 66 / 100 / 133
Soporte los Modos PIO 0~4,
Controlador ATA S erie Integrado

Tasas de transferencia de hasta 3 Gb/s.
Compatible con la versión SATA 2. 0.
Realtek RTL8201CL PHY

Negociación de 10 / 100 Mb/s
Funciones Hal f / Full dúplex

Realtek ALC861V D (Ver 6.x)
Realtek ALC888 (Ver 5.x)

Salida de soni do de 5.1 canales (Ver 6.x)
Salida de soni do de 7.1 canales (Ver 5.x)

Soporte de sonido de A lta Definición

34

NF520-A2 TE/NF520-A2 SE/NF520-A 2

NF52 0-A 2 TE /NF 520-A 2 S E NF520-A2

Ranura PCI X3 Ranura PCI X3

Ranuras

Conectores
en plac a

Panel
trasero de
E/S

Ta m año d e
la placa

Funciones
especiales

Ranura PCI Express x16 X1 R anura PCI Express x16 X 1
Ranura PCI express x 1 X2 Ranura PCI express x 1 X2

Conector disco flexible X1 Conector disco flexible X1
C o nec t or P uer t o de im pr es or a X 1 C o n ec t or Pu er to de im pr es or a X 1

Conector IDE X1 Conector IDE X1
Conector SATA X 4 Conector SATA X 2
Conect or de panel front al X1 Conector de panel frontal X1
Conector de sonido frontal X1 Conector de sonido frontal X1
Conec tor de entrada de CD X1 Conect or de entrada de CD X1
Conector de salida S/PDIF X1 Conector de salida S/PDIF X1
Cabecera de vent ilador de CPU X1 Cabecera de ventilador de CPU X1
Cabecera de vent ilador de s istema X1 Cabecera de ventilador de sistema X1
Cabecera de borrado de CMOS X1 Cabecera de borrado de CMOS X1
Cabecera de chasis abierto(opcional)X1 Cabecera de chasis abierto(opcional)X1
Conector USB X3 Conector USB X2
Conector de alimentación X1
(24 pat illas)
Conector de alimentación X1
(4 patillas)

Te c l ad o P S/ 2 X 1
Ratón PS/2 X1
Puerto serie X1
Puerto de red local X1
Puerto USB X4
Conector de sonido (Ver 6.x) X3
Conector de sonido (Ver 5.x) X6

200 mm. (A) X 293 mm. (H) 200 mm. (A) X 293 mm. (H)

Admite RAID 0 / 1 / 0+1 Admite RAID 0 / 1

Conector de alimentación X1
(24 pat illas)
Conector de alimentación X1
(4 patillas)

Te c l ad o P S/ 2 X 1
Ratón PS/2 X1
Puerto serie X1
Puerto de red local X1
Puerto USB X4
Conector de sonido (Ver 6.x) X3
Conector de sonido (Ver 5.x) X6

Soporte de
sistema
operativo

Windows 2K / XP / VISTA
Biostar se reserva el derecho de añadir o retirar
el soporte de cualquier SO con o sin aviso previo.

Windows 2K / XP / VISTA
Biostar se reserva el derecho de añadir o retirar
el soporte de cualquier SO con o sin aviso previo.

35

Motherboard Manual

PORTUGUESE

NF52 0-A 2 TE /NF 520-A 2 S E NF520-A2

Socket AM2
Processadores AMD Athlon 64 / Athlon 64 FX /

Athlon 64 x2/ Sempron

CPU

FSB

Chi ps et nForce 520 nForce 520LE

Es pec ificaçã
o Super I/O

Memória
princ ipal

IDE

SA TA II

LAN

Codec de
som

A arqu it ec t ura AM D 64 perm ite um a c om putaç ão
de 32 e 64 bits

Suporta as tecnologias Hyper Transport e
Cool’n’Quiet

Suporta a tecnologia HyperTransport com uma
largura de banda até 1G

ITE 8716F
Proporciona as funcionalidades mais utilizadas

em term os da especificação Super I/O.
Int erface LPC (Low Pin Count).

Iniciativas para controlo do ambiente
Monitorização do hardware

Controlador da velocidade da ventoinha
Função "Smart Guardian" da ITE

Ranhuras DIMM DDR2 x 4
Cada módulo DIMM suporta uma memória

DDR2 de 256/512 MB & 1 GB/2 GB
Capacidade máxima de memória: 8 GB

Módulo de memória DDR 2 de canal duplo
Suporta módul os DDR2 533 / 667 / 800

Os módulos DIMM registados e os DIMM ECC
não são suportados
Controlador IDE i nt egrado

Modo Bus master Ultra DMA 33 / 66 / 100 / 133
Suporta o m odo PIO 0~ 4,
Controlador Serial ATA int egrado

Veloc idades de transmissão de dados até 3 Gb/s.
Compatibilidade com a especificação SATA

v e rs ã o 2. 0.
Realtek RTL8201CL PHY
Auto negociação de 10 / 100 M b/s

Capacidade semi/full-duplex
Realtek ALC662 (NF520-A2 TE) (Ver 6.x)
Realtek ALC861V D (NF520-A2 SE) (Ver 6. x)

Realtek ALC 888 (Ver 5.x)
Saída de áudio de 5. 1 canais (Ver 6. x)

Saída de áudio de 7. 1 canais (Ver 5. x)
Suporta a especificação High-Definit ion A udio

Socket AM2
Processadores AMD Athlon 64 / Athlon 64 FX /

Athlon 64 x2/ Sempron
A arqu it ec t ura AM D 64 perm ite um a c om putaç ão

de 32 e 64 bits
Suporta as tecnologias Hyper Transport e

Cool’n’Quiet
Suporta a tecnologia HyperTransport com uma
largura de banda até 1G

ITE 8716F
Proporciona as funcionalidades mais utilizadas

em term os da especificação Super I/O.
Int erface LPC (Low Pin Count).

Iniciativas para controlo do ambiente
Monitorização do hardware

Controlador da velocidade da ventoinha
Função "Smart Guardian" da ITE

Ranhuras DIMM DDR2 x 4
Cada módulo DIMM suporta uma memória

DDR2 de 256/512 MB & 1 GB/2 GB
Capacidade máxima de memória: 8 GB

Módulo de memória DDR 2 de canal duplo
Suporta módul os DDR2 533 / 667 / 800

Os módulos DIMM registados e os DIMM ECC
não são suportados
Controlador IDE i nt egrado

Modo Bus master Ultra DMA 33 / 66 / 100 / 133
Suporta o m odo PIO 0~ 4,
Controlador Serial ATA int egrado

Veloc idades de transmissão de dados até 3 Gb/s.
Compatibilidade com a especificação SATA

v e rs ã o 2. 0.
Realtek RTL8201CL PHY
Auto negociação de 10 / 100 M b/s

Capacidade semi/full-duplex

Realtek ALC 861V D (Ver 6.x)
Realtek ALC 888 (Ver 5.x)

Saída de áudio de 5. 1 canais (Ver 6. x)
Saída de áudio de 7. 1 canais (Ver 5. x)

Suporta a especificação High-Definit ion A udio

36

NF520-A2 TE/NF520-A2 SE/NF520-A 2

NF52 0-A 2 TE /NF 520-A 2 S E NF520-A2

Ranhura PCI x3 Ranhura PCI x3

Ranhuras

Conectores
na placa

Entradas/S
aídas no
painel

traseiro

Tamanho
da placa
Característi
cas
especiais

Sistemas
operativos
suportados

Ranhura PCI Express x16 x1 R anhura PCI Expr ess x16 x1
Ranhura PCI Express x 1 x2 Ranhura PCI Express x 1 x2

Conect or da unidade de disquet es x1 Conector da unidade de di squetes x1
Conector da para impressora x1 Conector da para impressora x1

Conector IDE x1 Conector IDE x1
Conector SATA x4 C onec t or SATA x 2
Conect or do pai nel frontal x1 Conec tor do painel frontal x1
Conector de áudio frontal x1 Conect or de áudio frontal x1

Conec tor para entrada de CDs x1 Conector para entrada de CDs x1
Conector de saída S/PDIF x1 Conector de saída S/PDIF x1
Conector da ventoinha da CPU x1 Conect or da vent oinha da CPU x1
Conector da ventoinha do sistema x1 Conect or da vent oinha do sistema x1
Conector para limpeza do CMOS x1 Conector para limpeza do CMOS x1

Conect or para detecção da
abertura do chassis (opcional) x1
Conector USB x3 Conector USB x2
Conector de alimentação x1
(24 pinos)

Conector de alimentação x1
(4 pinos)

Te c l ad o P S/ 2 x1
Rato PS/2 x1
Port a séri e x1

Porta LAN x1
Porta USB x4
Tomada de áudio (Ver 6.x) x3
Tomada de áudio (Ver 5.x) x6

200 mm (L) X 293 mm (A) 200 m m (L) X 293 m m (A)

Suporta as funções RAID 0 / 1 / 0+1 S uporta as funções RAID 0 / 1

Windows 2K / XP / VISTA
A Biostar reserva-se o direito de adicionar ou
remover suporte para qualquer sistema
operativo com ou sem aviso prévio.

Conect or para detecção da
abertura do chassis (opcional) x1

Conector de alimentação x1
(24 pinos)

Conector de alimentação x1
(4 pinos)

Te c l ad o P S/ 2 x1
Rato PS/2 x1
Port a séri e x1

Porta LAN x1
Porta USB x4
Tomada de áudio (Ver 6.x) x3
Tomada de áudio (Ver 5.x) x6

Windows 2K / XP / VISTA
A Biostar reserva-se o direito de adicionar ou
remover suporte para qualquer sistema
operativo com ou sem aviso prévio.

37

Motherboard Manual

POLISH

NF52 0-A 2 TE /NF 520-A 2 S E NF520-A2

Socket AM2

AM D Athl on 64 / At hlon 64 FX / Athlon 64 x2/

Procesor

FSB

Chi ps et nForce 520 nForce 520LE

Pamięć

główna

Super I/O

IDE

SA TA II

LAN

Sem pron Procesory

Architektura AMD 64 um ożliw i a prze tw arzanie

32 i 64 bi towe

Obsługa Hyper Transport oraz Cool’n’Quiet

Obsługa HyperTransport o szerokości pasma do

1G

Gniaz da DDR2 DIMM x 4

Każde gniaz do DIMM obs ługuje moduły

256/512MB oraz 1GB/2GB DDR2

Maks. wielkość pa mi ęci 8GB

Moduł pamięci DDR2 z trybem podwójnego

kanału

Obsługa DDR 2 533 / 667 / 800

Brak obsługi Registered DIMM oraz ECC DIMM

ITE 8716F

Zapewnia najbardziej powszechne funkcje Super

I/O.

Int erfejs Low Pin Count

Funkcje kontroli warunków pracy,

Monitor H/W

Kontroler prędkości wentylatora

Funkcja ITE "S mart Guardian"

Z i nt e g ro w an y ko nt r ol e r I DE

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master

obsłu ga P IO t r yb 0~ 4,

Zintegrowany kontroler Serial A TA

Transfer danych do 3 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0.

Realtek RTL8201CL PHY

10 / 100 Mb/s z automatyczną negocjacją

szybkości

Działanie w t rybie połowicz ne go / p ełnego

dupleksu

38

Socket AM2

AM D Athl on 64 / At hlon 64 FX / Athlon 64 x2/

Sem pron Procesory

Architektura AMD 64 um ożliw i a prze tw arzanie

32 i 64 bi towe

Obsługa Hyper Transport oraz Cool’n’Quiet

Obsługa HyperTransport o szerokości pasma do

1G

Gniaz da DDR2 DIMM x 4

Każde gniaz do DIMM obs ługuje moduły

256/512MB oraz 1GB/2GB DDR2

Maks. wielkość pa mi ęci 8GB

Moduł pamięci DDR2 z trybem podwójnego

kanału

Obsługa DDR 2 533 / 667 / 800

Brak obsługi Registered DIMM oraz ECC DIMM

ITE 8716F

Zapewnia najbardziej powszechne funkcje Super

I/O.

Int erfejs Low Pin Count

Funkcje kontroli warunków pracy,

Monitor H/W

Kontroler prędkości wentylatora

Funkcja ITE "S mart Guardian"

Z i nt e g ro w an y ko nt r ol e r I DE

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master

obsłu ga P IO t r yb 0~ 4,

Zintegrowany kontroler Serial A TA

Transfer danych do 3 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0.

Realtek RTL8201CL PHY

10 / 100 Mb/s z automatyczną negocjacją

szybkości

Działanie w t rybie połowicz ne go / p ełnego

dupleksu

NF520-A2 TE/NF520-A2 SE/NF520-A 2

NF52 0-A 2 TE /NF 520-A 2 S E NF520-A2

Kodek
dźwiękow y

Gniazda

Złącz a
wbudowane

Back Panel
I/O

Wymiary
płyty

Funkcje
specjalne

Realtek ALC662 (NF520-A2 TE) (Ver 6.x)
Realtek ALC861V D (NF520-A2 SE) (Ver 6. x)
Realtek ALC 888 (Ver 5.x)

5.1 kanałow e wy j ście audio (V er 6.x)

7.1 kanałow e wy j ście audio (V er 5.x)
Obsługa High-Definition Audio
Gniazdo PCI x3 Gniazdo PCI x3
Gniazdo PCI Express x16 x1 Gniazdo PCI Express x16 x1
Gniazdo PCI Express x 1 x2 Gniazdo PCI Express x 1 x2

Złącz e napędu dyskietek x1 Złącz e napędu dyskietek x1
Złącze Port drukarki x1 Złącze Port drukarki x1

Złącz e IDE x1 Z łącz e I DE x1
Złącz e SA TA x4 Złącze SATA x2
Złącz e panela przedniego x1 Złącz e panela przedniego x1
Przednie złą cz e audio x1 P rzednie złą cz e audio x1
Złącz e w ejścia C D x1 Z łącz e w ejścia C D x1
Złącz e w yjści a S /P DIF x1 Z łącz e w y jści a S/ PD IF x1
Złącz e głów kow e w ent ylat or a pr oc es o ra x1 Z łącz e głów kowe w ent ylat o r a pr oc es o ra x1
Złącz e główkowe wentyl atora s yst emowego x1 Złącze główkowe wentylatora s yst emowego x1
Złącz e głów kowe kas ow a n i a
CMOS x1
Złącz e głów kowe otw ar ci a
obudowy (opcja) x1
Złącz e USB x3 Z łącz e USB x2
Złącz e z asilani a (24 pi now e) x1 Złącz e z as il ania (24 pinowe ) x 1
Złącz e z asilani a (4 pi now e) x1 Z łącz e z as ilania (4 pinowe ) x1

Klawiatura PS/2 x1
Mysz PS/2 x1
Port szeregow y x1
Port LAN x1
Port USB x4
Gniazdo audio (Ver 6. x) x3
Gniazdo audio (Ver 5. x) x6

200 mm (S) X 293 mm (W) 200 m m (S) X 293 mm (W)

Obsługa RAID 0 / 1 / 0+1 O bsługa RAID 0 / 1

Realtek ALC 861V D (Ver 6.x)
Realtek ALC 888 (Ver 5.x)

5.1 kanałow e wy j ście audio (V er 6.x)

7.1 kanałow e wy j ście audio (V er 5.x)
Obsługa High-Definition Audio

Złącz e głów kowe kas ow a n i a
CMOS x1
Złącz e głów kowe otw ar ci a
obudowy (opcja) x1

Klawiatura PS/2 x1
Mysz PS/2 x1
Port szeregow y x1
Port LAN x1
Port USB x4
Gniazdo audio (Ver 6. x) x3
Gniazdo audio (Ver 5. x) x6

Obsluga
systemu
operacyjne
go

Windows 2K / XP / VISTA
Bi ostar zastrzega s obie prawo dodawania lub
odwoływania obsługi dowolnego systemu
o p e rac y j n e go b ez powi a d om i eni a.

Windows 2K / XP / VISTA
Bi ostar zastrzega s obie prawo dodawania lub
odwoływania obsługi dowolnego systemu
o p e rac y j n e go b ez powi a d om i eni a.

39

Motherboard Manual

/

/

RUSSIAN

NF 520- A2 TE/N F520- A 2 SE NF520-A2

CPU
(центральный
проц ессор)

FSB

Набор
микросхем

Основна я
память

Super I/O

IDE

SA TA

Локальная
сеть

Звуковой
кодек

40

Гнездо AM2
Процессоры AM D At hl on 64 / Athlon 64 FX /

Althlon 64X 2 / Sem pron

Архитектура AMD 64 разрешать обработка
данны х на 32 и 64 бит
Поддержка Hyper Transport и Cool’n’Q uiet

Поддержка HyperTransport с пропус кной
способностью до 1G

nForce 520 nForce 520LE

Слоты DDR 2 DIMM x 4
Каждый модуль DIMM поддерживает

256/512МБ & 1ГБ/2ГБ DDR2
Максимальная ём к ос ть памяти 8 ГБ
Модуль памяти с двухканальным реж имом

DDR2

Поддержка DDR2 533 / 667 / 800
Не поддерж ивает з арегис трированны е
модули DIMM and ECC DIMM

ITE 8716F

Обеспечивает наиболее ис п о ль з у е мы е
действующие функциональные
возможности Super I/O.

Интерфейс с низ к им количеством вы в о д о в
Иниц иативы по охране окруж ающей среды,
Аппаратный монитор
Регулятор скорости
Функция ITE "Sm art Guardian"

(Интеллектуальная защита)

Вс троенное ус тро й с тво управления
встроенны ми интерфейсами устройств

Режим "хозяина" шины Ultra DM A 33 / 66 /

100 / 133

Поддержка реж има PIO 0~4,

Вс троенное пос ледовательное ус тройс тво
управления ATA
скорость передачи данны х до 3 гигабит/с.
Соответствие с пециф икации SA TA версия

2.0.
Realtek RTL8201CL PHY

Автоматическое согласование 10
Частичная / полная дуплексная способность

Realtek ALC662 (NF520-A2 TE) (Ver 6.x)
Realtek ALC861V D (NF520-A2 SE) (Ver 6. x)

Realtek ALC 888 (Ver 5.x)

5.1канальны й звуковой выход (Ver 6.x)

7.1канальны й звуковой выход (Ver 5.x)
Звуковая поддерж ка High-Definition

100 Мб/с

Гнездо AM2
Процессоры AM D At hl on 64 / Athlon 64 FX /

Althlon 64X 2 / Sem pron

Архитектура AMD 64 разрешать обработка
данны х на 32 и 64 бит
Поддержка Hyper Transport и Cool’n’Q uiet

Поддержка HyperTransport с пропус кной
способностью до 1G

Слоты DDR 2 DIMM x 4
Каждый модуль DIMM поддерживает

256/512МБ & 1ГБ/2ГБ DDR2
Максимальная ём к ос ть памяти 8 ГБ
Модуль памяти с двухканальным реж имом

DDR2

Поддержка DDR2 533 / 667 / 800
Не поддерж ивает з арегис трированны е
модули DIMM and ECC DIMM

ITE 8716F

Обеспечивает наиболее ис п о ль з у е мы е
действующие функциональные
возможности Super I/O.

Интерфейс с низ к им количеством вы в о д о в
Иниц иативы по охране окруж ающей среды,
Аппаратный монитор
Регулятор скорости
Функция ITE "Sm art Guardian"

(Интеллектуальная защита)

Вс троенное ус тро й с тво управления
встроенны ми интерфейсами устройств

Режим "хозяина" шины Ultra DM A 33 / 66 /

100 / 133

Поддержка реж има PIO 0~4,

Вс троенное пос ледовательное ус тройс тво
управления ATA
скорость передачи данны х до 3 гигабит/с.
Соответствие с пециф икации SA TA версия

2.0.
Realtek RTL8201CL PHY

Автоматическое согласование 10
Частичная / полная дуплексная способность

Realtek ALC 861V D (Ver 6.x)
Realtek ALC 888 (Ver 5.x)

5.1канальны й звуковой выход (Ver 6.x)

7.1канальны й звуковой выход (Ver 5.x)
Звуковая поддерж ка High-Definition

100 Мб/с

NF520-A2 TE/NF520-A2 SE/NF520-A 2

NF 520- A2 TE/N F520- A 2 SE NF520-A2

Слот PCI x3 Слот PCI x3
Слот PCI Express x16 x1 Слот PCI Express x16 x1 Слоты
Слот PCI Express x 1 x2 Слот PCI Express x 1 x2

Разъём НГМД x1 Разъём НГМД x1
Разъём Порт подключения принтера x1 Разъём Порт подключения принтера x1

Разъём IDE x1 Разъём IDE x1
Разъём SATA x4 Разъём SATA x2

Разъём на лиц евой панели x1 Разъём на лиц евой панели x1
Входной звуковой раз ъём x1 Входной звуковой раз ъём x1
Разъём ввода для CD x1 Раз ъём ввода для CD x1

Разъём вы в о д а для S/PDIF x1 Разъём вы в о д а для S/PDIF x1

Вс троенны й
разъём

Задняя
панель
средств

ввода-вы во д а

Размер
панели

Специальные
технические

характеристи
ки

Поддержка

OS

Контактирующее приспособление
вентилятора центрального процесс ора x1

Контактирующее приспособление
вентилятора системы x1

Открытое ко нта к тир ую щ е е прис пособление

CMOS x1

Шасси откры того контактирующего
приспос обления (дополнительно) x1
USB-раз ъём x3 USB-раз ъём x2

Разъем питания (24 вы в о д ) x 1 Раз ъем питания (24 вы в о д ) x 1
Разъем питания (4 вы в о д) x 1 Разъем питания (4 вы в о д) x 1

Клавиатура PS/2 x1
Мышь PS /2 x1
Последовательны й порт x1

Порт LAN x1
USB-порт x4

Гнездо для подклю чения наушников x3

(Ver 6. x)
Гнездо для подклю чения наушников x6

(Ver 5. x)

200 мм (Ш) X 293 мм (В) 200 мм (Ш) X 293 мм (В)

Поддержка RAID 0 / 1 / 0+1 Поддержка RAID 0 / 1

Windows 2K / XP / VISTA
Biostar сохраняет за собой право добавлять

или удалять средства обес печения для OS с
или без предваритель ного уведомления.

Контактирующее приспособление
вентилятора центрального процессора x1

Контактирующее приспособление
вентилятора системы x1

Открытое ко нта к тир ую щ е е прис пособление

CMOS x1

Шасси откры того контактирующего
приспос обления (дополнительно) x1

Клавиатура PS/2 x1
Мышь PS /2 x1
Последовательны й порт x1

Порт LAN x1
USB-порт x4

Гнездо для подклю чения наушников x3

(Ver 6. x)
Гнездо для подклю чения наушников x6

(Ver 5. x)

Windows 2K / XP / VISTA
Biostar сохраняет за собой право добавлять

или удалять средства обеспечения для OS с
или без предваритель ного уведомления.

41

Motherboard Manual

/

/

/

ARABIC

ﺲﺒﻘﻡAM2

تﺎ ﺠﻟﺎ ﻌﻡ AMD Athlon 64

ﺔ ﻴﻨﻘ ﺗ ﻦﻜﻤﺗAMD 64 ﺔﻋﺮﺴﺏ ﺔﻴﺏ ﻮﺳﺎﺤﻟا تﺎﻴﻠﻤﻌﻟا ءاﺮ ﺝ إ 32 و64 ﺖﺏ

ﺔ ﻴﻨﻘﺗ ﻢﻋ ﺪ ﺗ Hyper Transport و Cool’n’Quiet

ﺔ ﻴﻨﻘﺗ ﻢﻋ ﺪ ﺗ HyperTransport ﻰﻟإ ﻞﺼﻳ ددﺮﺘﺏ 1000دد ﺮ ﺗ

ﺔﺤﺘﻓ ﻞآ ﻢﻋ ﺪ ﺗ DIMM عﻮ ﻥ ﻦﻡ ةﺮآا ذ ﻢﻋ ﺪﺗ DDR 2 ﺔﻌﺳ 256/512 ﺎﺠﻴ ﻡ

عﻮ ﻥ ﻦﻡ ةﺮ آ اﺬﻟا ﻢﻋ ﺪ ﺗ DDR 2 تﺎﻌﺳ 533 / 667 / 800ﺖﻳ ﺎﺏ ﺎﺠﻴﻡ

ةﺮآ اﺬﻟا ﻖﺋﺎﻗر ﻢﻋ ﺪﺗ ﻻDIMM ﻊﻡ ﻖﻓاﻮﺘ ﺗ ﻻ ﻲﺘﻟا ﻚﻠﺗ و ECC

ﺔﻔﻴﻇو ﺮﻓﻮﺗSuper I/O ًﺎﻡا ﺪ ﺨ ﺘﺳ ا ﺮﺜ آ ﻷا .

ﺗﻢﻋ ﺪ ﺔ ﻴﻨﻘﺗ

ﺔﻔﻴﻇو"Sm art Guardian" ﻦﻡ ITE

ﺔ ﻴﻨﻘﺘ ﺏ ﻞﻗﺎﻥ Ultra DMA 33 / 66 / 100 / 133

تﺎﻔﺹاﻮﻤﻟ ﺔﻘﺏﺎﻄﻡSA TA راﺪﺹ ﻹا 2.0.

Realtek ALC861V D(Ver 6.x)

Realtek ALC888(Ver 5.x)

(Ver 6. x) 5.1 تﻮ ﺼﻟا جﺮﺨ ﻟ تاﻮﻨﻗ

(Ver 5. x) 7.1 تﻮ ﺼﻟا جﺮﺨ ﻟ تاﻮﻨﻗ

Athlon 64 FX /

Athlon 64 x2

ةﺮآ اذ ةﺪﺣوDDR2 ﻘﻟا ﺔﺝودﺰﻡةﺎﻨ

Sempron

ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ8 ﺖﻳ ﺎﺏ ﺎﺠﻴ ﺝ

ITE 8716F

Low Pin C ount Inter face

ﺔ ﺌﻴﺒ ﻟا ﻲﻓ ﻢﻜ ﺤ ﺘ ﻟا ﻞﺋ ﺎﺳو:

ةﺰﻬ ﺝﻷ ا ﺔﻟﺎﺣ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻡ

ﺔﺣوﺮﻤﻟا ﺔﻋﺮﺳ ﻲﻓ ﺐﻗاﺮﻡ

ﻢﻜﺤﺘﻡIDEﻞﻡﺎﻜﺘﻡ

ﻲﺴﻴﺋر ﻊﺿ و

ﻊﺿو ﻢﻋ دPIO Mode 0~4

ﻢﻜﺤﺘﻡSerial ATAﻞﻡﺎﻜﺘﻡ

ﻰﻟإ ﻞﺼﺗ تﺎﻋﺮﺴﺏ تﺎﻥ ﺎﻴﺒﻟا ﻞﻘﻥ3 ﺖﺏﺎﺠﻴﺝ/ﺔ ﻴﻥﺎﺙ.

Realtek RTL8201CL PHY

ﻦﻡ ﻒﻳﺮﻌ ﺘﻟا ﻲﻟﺎﻋ تﻮ ﺼ ﻟا ﺔ ﻴﻨﻘﺗ ﻢﻋ ﺪﺗ

تﺎ ﺠﻟﺎ ﻌﻡ AMD Athlon 64 / Athlon 64 FX

Athlon 64 x2/ Sempron

ﺔ ﻴﻨﻘ ﺗ ﻦﻜﻤﺗAMD 64 ﺔﻋﺮﺴﺏ ﺔﻴﺏ ﻮﺳﺎﺤﻟا تﺎﻴﻠﻤﻌﻟا ءاﺮ ﺝ إ 32 و64 ﺖﺏ

ﺔ ﻴﻨﻘﺗ ﻢﻋ ﺪ ﺗ Hyper Transport و Cool’n’Quiet

ﺔﺤ ﺘ ﻓDDR2 DIMM دﺪﻋ4

ﺔﺤﺘﻓ ﻞآ ﻢﻋ ﺪ ﺗ DIMM عﻮ ﻥ ﻦﻡ ةﺮآا ذ ﻢﻋ ﺪﺗ DDR 2 ﺔﻌﺳ 256/512 ﺎﺠﻴ ﻡ

و ﺖﻳﺎﺏ1/2 ﺎﺠﻴﺝﺖﻳﺎ ﺏ

ﺮآاذ ةﺪﺣو ة DDR2 ﻘﻟا ﺔﺝودﺰﻡةﺎﻨ

عﻮ ﻥ ﻦﻡ ةﺮ آ اﺬﻟا ﻢﻋ ﺪ ﺗ DDR 2 تﺎﻌﺳ 533 / 667 / 800ﺖﻳ ﺎﺏ ﺎﺠﻴﻡ

ةﺮآ اﺬﻟا ﻖﺋﺎﻗر ﻢﻋ ﺪﺗ ﻻDIMM ﻊﻡ ﻖﻓاﻮﺘ ﺗ ﻻ ﻲﺘﻟا ﻚﻠﺗ و ECC

ﺔﻔﻴﻇو ﺮﻓﻮﺗSuper I/O ًﺎﻡا ﺪ ﺨ ﺘﺳ ا ﺮﺜ آ ﻷا .

ﺗﻢﻋ ﺪ ﺔ ﻴﻨﻘﺗ Low Pin C ount Interface

ةﺰﻬ ﺝﻷ ا ﺔﻟﺎﺣ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻡ

ﺔﺣوﺮﻤﻟا ﺔﻋﺮﺳ ﻲﻓ ﺐﻗاﺮﻡ

ﺔﻔﻴﻇو"Sm art Guardian" ﻦﻡ ITE

ﺔ ﻴﻨﻘﺘ ﺏ ﻞﻗﺎﻥ Ultra DMA 33 / 66 / 100 / 133

ﻊﺿو ﻢﻋ دPIO Mode 0~4

ﻢﻜﺤﺘﻡSerial ATAﻞﻡﺎﻜﺘﻡ

تﺎﻔﺹاﻮﻤﻟ ﺔﻘﺏﺎﻄﻡSA TA راﺪﺹ ﻹا 2.0.

Realtek RTL8201CL PHY

ضوﺎﻔﺗ ﻲﺋﺎﻘﻠﺗ 10/100 ﺎﺠﻴﻣ ﺖیﺎﺏ ﺎﺠﻴﺝ ﺖﺏ/ﺔﻴﻥﺎ ﺛ

ﺔﻴﻥﺎﻜﻣإ ﻞﻘﻨﻟا جودﺰﻤﻟا ﻞﻣﺎﻜﻟا/ﻲﻔ ﺼ ﻨﻟا

Realtek ALC662(NF520-A2 TE)(Ver 6.x)

Realtek ALC861V D(NF 520-A 2 SE)(Ver 6. x)

Realtek ALC888(Ver 5.x)

(Ver 6. x) 5.1 ﻟ تاﻮﻨ ﻗتﻮ ﺼﻟ ا جﺮﺨ

(Ver 5. x) 7.1 تﻮ ﺼﻟا جﺮﺨ ﻟ تاﻮﻨﻗ

ﻦﻡ ﻒﻳﺮﻌ ﺘﻟا ﻲﻟﺎﻋ تﻮ ﺼ ﻟا ﺔ ﻴﻨﻘﺗ ﻢﻋ ﺪﺗ

ﺲﺒﻘﻡAM2

ﺔﺤ ﺘ ﻓDDR2 DIMM دﺪﻋ4

و ﺖﻳﺎﺏ1/2 ﺎﺠﻴﺝﺖﻳﺎ ﺏ

ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ8 ﺖﻳ ﺎﺏ ﺎﺠﻴ ﺝ

ITE 8716F

ﻴﺒ ﻟا ﻲﻓ ﻢﻜ ﺤ ﺘ ﻟا ﻞﺋ ﺎﺳوﺔﺌ:

ﻢﻜﺤﺘﻡIDEﻞﻡﺎﻜﺘﻡ

ﻲﺴﻴﺋر ﻊﺿ و

تﺎﻋﺮﺴﺏ ت ﺎﻥ ﺎﻴﺒﻟا ﻞﻘﻥ ﻰﻟإ ﻞﺼﺗ3 ﺖﺏﺎﺠﻴﺝ/ﺔ ﻴﻥﺎﺙ.

ضوﺎﻔﺗ ﻲﺋﺎﻘﻠﺗ 10/100 ﺎﺠﻴﻣ ﺖیﺎﺏ ﺎﺠﻴﺝ ﺖﺏ/ﺔﻴﻥﺎ ﺛ

ﺔﻴﻥﺎﻜﻣإ ﻞﻘﻨﻟا اجودﺰﻤﻟ ﻞﻣﺎﻜﻟا/ﻲﻔ ﺼ ﻨﻟا

NF52 0-A 2 TE/N F520-A 2 SE NF520-A2

ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا

ﺔﻳﺰآﺮﻤ ﻟا

ﻞﻗﺎﻨﻟا ﻲﻡﺎﻡﻷا ﻲﺒﻥ ﺎﺠﻟ ا ﺔ ﻴﻨﻘﺗ ﻢﻋ ﺪ ﺗ HyperTransport إ ﻞﺼﻳ ددﺮﺘﺏ ﻰﻟ 1000دد ﺮ ﺗ

ﺔﻋﻮﻤﺠﻣ ﺢﺋاﺮﺸ ﻟا nFor c e 5 20 nFor ce 5 20LE

ةﺮآاﺬﻟا ﺔ ﻴ ﺴﻴﺋﺮﻟا

Super I/O

ﺬﻔﻨﻣ IDE

SATA II

ﺔﻜﺒﺵ ﺔﻴﻠﺧ اد

ﻚیدﻮآ تﻮ ﺼﻟا

42

Wi ndows 2000 / XP / VISTA

ﻆﻔ ﺘﺤﺗ Biostar ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤ ﺏ وأ رﺎ ﻄﺥ ﺈﺏ ﻞﻴﻐﺸ ﺗ مﺎ ﻈﻥ يﻷ ﻢﻋ ﺪﻟ ا ﺔﻟازإ وأ

ﺢﻴﺗﺎﻔﻡ ﺔﺣﻮﻟPS/2 دﺪﻋ1

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻡ دﺪﻋ1

ﺔﻴﻠ ﺤﻡ لﺎ ﺼ ﺗا ﺔﻜﺒ ﺷ ﺬﻔﻨﻡ دﺪﻋ1

تﻮﺹ ﺲﺒﻘﻡ(Ve r 6. x) دﺪﻋ3
تﻮﺹ ﺲﺒﻘﻡ(Ve r 5. x) دﺪﻋ6

ﻢﻋﺪﺗ ﺔ ﻴﻨﻘ ﺗ RAID 0 / 1

رﺎ ﻄﺥ إ نوﺪﺏ.

NF520-A2 TE/NF520-A2 SE/NF520-A 2

ﺔﺤ ﺘ ﻓPCI دﺪﻋ3 ﺔﺤ ﺘ ﻓPCI دﺪﻋ3
ﺔﺤ ﺘ ﻓx16 PCI Express دﺪﻋ1 ﺔﺤ ﺘ ﻓx16 PCI Express دﺪﻋ1 تﺎ ﺤﺘﻔ ﻟ ا
ﺔﺤ ﺘ ﻓPCI Express x 1 دﺪﻋ2 ﺔﺤﺘﻓPCI Express x 1 دﺪﻋ2

ﺔﻥﺮ ﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻥﺮ ﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ دﺪﻋ1

ﺔﻌﺏﺎﻃ ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻌﺏﺎﻃ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻔﻨﻡIDE دﺪﻋ1 ﺬﻔﻨﻡIDE دﺪﻋ1
ﺬﻔﻨﻡSATA دﺪﻋ4 ﺬﻔﻨﻡSATA دﺪﻋ2

ﺔﻴ ﻡﺎ ﻡﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻴ ﻡﺎ ﻡﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ دﺪﻋ1

ﻲﻡﺎﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ دﺪﻋ1 ﻲﻡﺎﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻔﻨﻡCD-IN دﺪﻋ1 ﺬﻔﻨﻡCD-IN دﺪﻋ1

جﺮﺥ ﺬﻔﻨﻡS/PDI F دﺪﻋ1 جﺮﺥ ﺬﻔﻨﻡS/PDI F دﺪﻋ1

ﺔﻳﺰآ ﺮ ﻤﻟ ا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻡ ﺔﻠﺹو دﺪﻋ1 ﺔﻳﺰآ ﺮ ﻤﻟ ا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻡ ﺔﻠﺹو دﺪﻋ1

مﺎﻈﻨﻟا ﺔﺣ وﺮ ﻡ ﺔﻠﺹو دﺪﻋ1 مﺎﻈﻨﻟا ﺔﺣ وﺮ ﻡ ﺔﻠﺹو دﺪﻋ1

ﺢﺴﻡ ﺔﻠﺹوCMOS دﺪﻋ1 ﺢﺴﻡ ﺔﻠﺹوCMOS دﺪﻋ1

ﻞﻜﻴ ﻬﻟ ا ﺢﺘﻓ ﺔﻠﺹو) ير ﺎ ﻴﺘ ﺥا( دﺪﻋ1 ﻞﻜﻴ ﻬﻟ ا ﺢﺘﻓ ﺔﻠﺹو) ير ﺎ ﻴﺘ ﺥا( دﺪﻋ1

ﺬﻔﻨﻡUSB دﺪﻋ3 ﺬﻔﻨﻡUSB دﺪﻋ2

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ)24سﻮﺏد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ)24سﻮﺏد( دﺪﻋ1
ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ)4ﺲ ﻴﺏﺎ ﺏد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ)4ﺲ ﻴﺏﺎ ﺏد( دﺪﻋ1

ﺢﻴﺗﺎﻔﻡ ﺔﺣﻮﻟPS/2 دﺪﻋ1

سوﺎﻡ PS/2 دﺪﻋ1

ﺔﻴﻠ ﺤﻡ لﺎ ﺼ ﺗا ﺔﻜﺒ ﺷ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻓﺎﻨ ﻡUSB دﺪﻋ4

Wi ndows 2000 / XP / VISTA

ﻆﻔ ﺘﺤﺗ Biostar وأ رﺎ ﻄﺥ ﺈﺏ ﻞﻴﻐﺸ ﺗ مﺎ ﻈﻥ يﻷ ﻢﻋ ﺪﻟ ا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤ ﺏ

سوﺎﻡ PS/2 دﺪﻋ1

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻓﺎﻨ ﻡUSB دﺪﻋ4

ﺲﺒﻘﻡتﻮﺹ(Ve r 6. x) دﺪﻋ3

تﻮﺹ ﺲﺒﻘﻡ(Ve r 5. x) دﺪﻋ6

رﺎ ﻄﺥ إ نوﺪﺏ.

NF52 0-A 2 TE/N F520-A 2 SE NF520-A2

ﺬﻓﺎﻨﻤﻟا ﻰﻠﻋ ﺢﻄﺱ

ﺔﺡﻮﻠﻟا

ﺬﻓﺎﻨﻣ ﻞﺧد/جﺮﺧ

ﺔﺡﻮﻠﻟا ﺔﻴﻔ ﻠﺨﻟا

ﺎیاﺰﻣ ﺔﺹﺎﺧ ﻢﻋﺪﺗ ﺔ ﻴﻨﻘ ﺗ RAID 0 / 1 / 0+ 1
ﻢﺠﺡ ﺔﺡﻮﻠﻟا 200 ﻢﻡ)ضﺮﻋ (X 293 ﻢﻡ)عﺎ ﻔ ﺗر ا( 200 ﻢﻡ)ضﺮﻋ (X 293 ﻢﻡ)عﺎ ﻔ ﺗر ا(

ﻢﻋد ﺔﻤﻈﻥأ ﻞﻴﻐﺸﺘﻟا

43

Motherboard Manual

JAPANESE

NF52 0-A 2 TE /NF 520-A 2 S E NF520-A2

Socket AM2

AM D Athl on 64 / At hlon 64 FX / Athlon 64 x2/

Sempron プロセッサ

CPU

FSB

チッ プセット nForce 520 nForce 520L E

メイ ンメモリ

Super I/O

IDE

SA TA II

LAN

AMD 64アーキテ クチャでは、 32ビットと 64ビット計

算が 可能です

ハイ パートラン スポートと クールアン ドクワイア ット

をサ ポートしま す

1G のバン ド幅までハ イパートラ ンスポート をサポー

トし ます

DDR2 DIMMス ロット x 4

各DIMMは 256/512MB & 1GB/2GB DDR 2をサポ

ート

最大 メモリ容量 8GB

デュ アル チャンネ ルモード DDR2メモリモ ジュール

DDR2 533 / 667 / 800をサポ ート

登録 済み DI MM とECC DIMMは サポートさ れません

ITE 8716F

もっ とも一般に 使用される レガシー Super I/O機能を

採用 しています 。

低ピ ンカウント インターフ ェイス

環境 コントロー ルイニシア チブ、

H/Wモニター

ファ ン速度コン トローラ / モニター

ITEの「スマー トガーディ アン」機能

統合 IDEコン トローラ

Ultra DMA 33 / 66 / 100 / 133バスマスタモー ド

PIO Mode 0~ 4の サポート、

統合 シリアルATAコン トローラ

最高 3 Gb/秒のデータ転 送速度

SA TAバージョン 2. 0 仕様に準拠 。

Realtek RTL8201CL PHY

10 / 100 Mb/秒のオート ネゴシエー ション

半/全二 重機能

Socket AM2

AM D Athl on 64 / At hlon 64 FX / Athlon 64 x2/

Sempron プロセッサ

AMD 64アーキテ クチャでは、 32ビットと 64ビット計

算が 可能です

ハイ パートラン スポートと クールアン ドクワイア ット

をサ ポートしま す

1G のバン ド幅までハ イパートラ ンスポート をサポー

トし ます

DDR2 DIMMス ロット x 4

各DIMMは 256/512MB & 1GB/2GB DDR 2をサポ

ート

最大 メモリ容量 8GB

デュ アル チャンネ ルモード DDR2メモリモ ジュール

DDR2 533 / 667 / 800をサポ ート

登録 済み DI MM とECC DIMMは サポートさ れません

ITE 8716F

もっ とも一般に 使用される レガシー Super I/O機能を

採用 しています 。

低ピ ンカウント インターフ ェイス

環境 コントロー ルイニシア チブ、

H/Wモニター

ファ ン速度コン トローラ / モニター

ITEの「スマー トガーディ アン」機能

統合 IDEコン トローラ

Ultra DMA 33 / 66 / 100 / 133バスマスタモー ド

PIO Mode 0~ 4の サポート、

統合 シリアルATAコン トローラ

最高 3 Gb/秒のデータ転 送速度

SA TAバージョン 2. 0 仕様に準拠 。

Realtek RTL8201CL PHY

10 / 100 Mb/秒のオート ネゴシエー ション

半/全二 重機能

44

NF520-A2 TE/NF520-A2 SE/NF520-A 2

NF52 0-A 2 TE /NF 520-A 2 S E NF520-A2

Realtek ALC662 (NF520-A2 TE) (Ver 6.x)

Realtek ALC861V D (NF520-A2 SE) (Ver 6. x)

サウ ンド

Codec

オン ボードコ

ネク タ

背面 パネル

I/O

ボー ドサイズ 200 mm (幅) X 293 mm (高さ) 200 mm (幅) X 293 mm (高さ)

特殊 機能 RAID 0 / 1 / 0+ 1のサポ ート RAID 0 / 1のサポート

OSサポート

Realtek ALC 888 (Ver 5.x)

5.1 チャ ンネルオー ディオアウ ト (V er 6.x )

7.1 チャ ンネルオー ディオアウ ト (V er 5.x )

ハイ デフィニシ ョンオーデ ィオのサポ ート

PCIスロット x3 PCIスロッ ト x3

PCI Express x16スロット x1 PCI Express x16スロット x1 スロ ット

PCI Express x 1スロット x2 PCI Express x 1スロット x2

フロ ッピーコネ クタ x1 フロ ッピーコネ クタ x1

プリ ンタポート コネクタ x1 プリ ンタポート コネクタ x1

IDEコネクタ x1 IDEコネクタ x1

SA TAコネクタ x4 SATAコ ネクタ x2

フロ ントパネル コネクタ x1 フロ ントパネル コネクタ x1

フロ ントオーデ ィオコネク タ x1 フロ ントオーデ ィオコネク タ x1

CDインコネクタ x1 CDインコネク タ x1

S/PDIFアウトコネク タ x1 S/PDIFア ウトコネク タ x1

CPUファ ンヘッダ x1 CPUファ ンヘッダ x1

シス テムファン ヘッダ x1 シス テムファン ヘッダ x1

CMOSクリアヘッ ダ x1 CMOSクリアヘッ ダ x1

シャ ーシオープ ンヘッダ (オプション ) x 1 シャ ーシオープ ンヘッダ (オプ ション ) x 1

USBコネクタ x3 USBコネクタ x2

電源 コネクタ (24ピン ) x1 電源 コネクタ (24ピン ) x1

電源 コネクタ (4ピン ) x1 電源 コネクタ (4ピン ) x1

PS/2キー ボード x1

PS/2マウ ス x1

シリ アルポート x1

LANポート x1

USBポート x4

オー ディオジャ ック (V er 6. x) x 3

オー ディオジャ ック (V er 5. x) x 6

Wi ndows 2000 / XP / VISTA

Biostarは事前 のサポート なしにOS サポートを追加ま

たは 削除する権 利を留保し ます。

Realtek ALC 861V D (Ver 6.x)

Realtek ALC 888 (Ver 5.x)

5.1 チャ ンネルオー ディオアウ ト (V er 6.x )

7.1 チャ ンネルオー ディオアウ ト (V er 5.x )

ハイ デフィニシ ョンオーデ ィオのサポ ート

PS/2キー ボード x1

PS/2マウ ス x1

シリ アルポート x1

LANポート x1

USBポート x4

オー ディオジャ ック (V er 6. x) x 3

オー ディオジャ ック (V er 5. x) x 6

Wi ndows 2000 / XP / VISTA

Biostarは事前 のサポート なしにOS サポートを追加ま

たは 削除する権 利を留保し ます。

2008/04/07

45