3779 Champion Blvd., Winston-Salem, NC 27105 1-888-845-9800 Fax# 1-336-245-6453 http://www.Beverage-Air.com
CUSTOMER’S CHOICE FOR A HOT KITCHEN Tested & Certified to Ambient Class of 100°F
Item No.
Quantity
FOOD PREPARATION |
MODELS: |
SERIES PREP TABLES |
SPE48-12M |
SPE48 ELITE SERIES |
SPE48-18M |
|
|
MEGA TOP |
|
|
|
3 Year Parts/Labor Warranty
Additional 2 Year Compressor Warranty
SPE48 ELITE SERIES — MEGA TOP
Fifty percent greater pan capacity than the all around standard prep table. Features enhanced refrigeration system and new and improved grille system for better airflow and less temperature gradient. Improved design provides better airflow management and uniform temperature distribution throughout the cabinet. Pans are cooled from the bottom, eliminating the necessity of air blanket. Airflow assures that product in open containers is kept below 41°F and above freezing. This translates into increased product shelf life, higher quality food, better food appearance, fresher product and a reduction of bacteria build-up to combat food-borne illnesses.
CABINET CONSTRUCTION
Exterior construction includes heavy-duty stainless steel finish on front, sides, top, door(s) and grille. Removable hoods and insulated lid assemblies are made of matching stainless steel. Cabinet back and bottom are constructed of galvanized steel. Interior liner is made of aluminum for superior resistance to corrosion.
Doors are mounted to face of cabinet on cartridge style hinges permitting them to self close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service and cleaning if required. A plug in type vinyl magnetic gasket is attached to each door for positive seal. Door handle is made from extruded aluminum with a black anodized finish. It is contoured to permit easy opening of doors with fingers from both top and bottom of handle.
Cabinet insulation is CFC free foamed-in-place polyurethane of twoinch minimum thickness. Six-inch casters, 2 with brakes, are standard. Legs are available as an option.
Cutting board supplied with cabinet is 10” wide constructed of highdensity white polyethylene plastic. It is readily removable for cleaning. Two epoxy-coated steel wire shelves per section are supplied as standard. Pans furnished are 1/6 size and made of polycarbonate plastic.
REFRIGERATION
More robust refrigeration system provides added capacity and efficiency. Systems are designed using CFC free R134a refrigerant and capillary tube between condenser and evaporator. Recirculated, forced air from evaporator is moved under pans, which are recessed 2” from top of cabinet. Forced air over the condenser is drawn through grille under door as well as the back and bottom of cabinet. Automatic condensate evaporator is provided to eliminate the need of floor drains.
SPE48-12M
ELECTRICAL CONNECTION
Units pre-wired at factory and include 8’ long cord and plug
Available From:
Loading...