Bernina ARTLINK V 6 INSTALLATION GUIDE

BERNINA ArtLink V6 embroidery software installation manual

PC-Requirements

PC Software for Microsoft Windows XP®* / Windows Vista™* / Windows® 7*

CPU: Single Core 1 GHz or greater processor (ev. Pentium III (800 MHZ) or higher)
System Memory: 512 MB or higher for Windows® XP.

1 GB or higher for Windows Vista™ / Windows® 7.

Free Disk Space: 500 MB before Installation Graphics Card Min.: Support for High Colour (16-Bit) and high resolution (1024 x 768). Monitor: 15” or larger USB-Ports: Dedicated USB for data transfer (Sewing machines/USB-Memory stick). Internet Browser, Mouse

* Operating Systems other than those stated above are not supported.

Note:

The instructions take you step-by-step through the installation of BERNINA ArtLink V6
software on a computer with a Windows® XP / Windows Vista™ or Windows® 7
operating system.
The file names and illustrations used may be different, depending on the installed
operating system. In this installation manual, illustrations from Windows® 7 are used.

Requirements for the installing of the BERNINA ARTlink V6 embroidery software:

• An Internet connection for downloading the files.

• All programs are closed.

• Administrator rights for your computer.

• Safety warnings during installation are confirmed with “Execute” or “Continue”.

Step 1:

To start the download process, click on the link:

Step 2:

A dialog window will open:
Click on "Save"

BERNINA International AG · Seestrasse 161 · CH-8266 Steckborn · Switzerland Page 1/5

Step 3:

A "Save as ...." window will open.

Select a path on your local PC
(Example: C:/BERNINA_Downloads).

Click on “

Save” to download the ZIP file onto your computer.

(The time for downloading the file is dependent on the band width of your Internet connection.)

Unselect "Close this dialog box when download completes" and click on "Open".

Step 4:

When the security message is displayed, click on “Allow”

BERNINA International AG · Seestrasse 161 · CH-8266 Steckborn · Switzerland Page 2/5