Beko WMI 71241 User manual [EN,RU]

Washing Machine

User Manual

WMI 71241

2820521843_EN/191115.1424Document Number=

This product was manufactured using the latest technology in environmentally friendly conditions.

Please read this user manual first!

Dear Customer, We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure. Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use. In case of transferring the product to someone else, give the manual as well.

The user manual will help you use your machine in a fast and safe way.

• Read the user manual before installing and starting your product.

• Always follow the safety instructions.

• Keep this user manual within easy reach for future reference.

• Read also the other documents supplied with the product. Remember that this user manual is also applicable for several other models.

Differences between models will be identified in the manual.

Explanation of symbols

Throughout this user manual the following symbols are used:

C Important information or useful hints about usage. A Warning for hazardous situations with regard to life and property. B Warning for electric shock.

2820521843_EN/191115.1424

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

TABLE OF CONTENTS

1 Your washing machine 5

Overview . . . . . . . . . . . . . . . . . . . . . . .5

Technical specifications . . . . . . . . . . . .6

2 Warnings 7

General Safety. . . . . . . . . . . . . . . . . . . 7

First Use . . . . . . . . . . . . . . . . . . . . . . .7

Intended use . . . . . . . . . . . . . . . . . . . . 7

Safety instructions . . . . . . . . . . . . . . . . 8

If there are children in your house... . . . 8

3 Installation 9

3.1 Appropriate installation location . . . 9

3.2 Removing packaging reinforcement 9

3.3 Removing the transportation locks 9

3.4 Connecting to the water supply . . 10

3.5 Connecting to the drain . . . . . . . . 10

3.6 Adjusting the feet. . . . . . . . . . . . . 11

3.7 Electrical connection . . . . . . . . . . 11

4 Preparation 13

Things to be done for energy saving . 13

Sorting the laundry . . . . . . . . . . . . . .13

Preparing laundry for washing . . . . . . 13

Correct load capacity . . . . . . . . . . . . 14

Loading the laundry. . . . . . . . . . . . . . 14

Detergents and softeners . . . . . . . . . 15

Programme and consumption table. . 21

Auxiliary function selection . . . . . . . . . 23

Starting the programme. . . . . . . . . . . 24

Progress of programme. . . . . . . . . . . 24

Loading door lock . . . . . . . . . . . . . . . 25

Changing the selections after programme

has started . . . . . . . . . . . . . . . . . . . . 25

Canceling the programme . . . . . . . . . 26

Machine is in Rinse Hold mode . . . . . 26

End of programme . . . . . . . . . . . . . . 26

Your machine is equipped with a

“Standby Mode” . . . . . . . . . . . . . . . . 26

6 Maintenance and cleaning 27

Cleaning the detergent drawer. . . . . . 27

Cleaning the loading door and the

drum . . . . . . . . . . . . . . . . . . . . . . . . . 27

Cleaning the body and control panel . 27

Cleaning the water intake filters . . . . .28

Draining remaining water and cleaning the

pump filter . . . . . . . . . . . . . . . . . . . . . 28

7 Troubleshooting 30

5 Operating the product 17

Control panel. . . . . . . . . . . . . . . . . . . 17

Display symbols. . . . . . . . . . . . . . . . . 18

Preparing the machine. . . . . . . . . . . . 18

Programme selection. . . . . . . . . . . . . 18

Main programmes . . . . . . . . . . . . . . 18

Additional programmes . . . . . . . . . . . 19

Temperature selection . . . . . . . . . . . . 20

Spin speed selection . . . . . . . . . . . . .20

1 Your washing machine

Overview

1- Power cable 2- Top lid 3- Control panel 4- Filter cap

5- Adjustable feet

6- Loading door 7- Detergent drawer 8- Drain hose

Technical specifications

Models Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) Electrical input (V/Hz)

Total current (A)

Total power (W) Spin speed (rpm max.)

Class

Degree of protection

WMI 71241

230 V / 50Hz

2200

1200

IPX4

Technical specifications may be changed without prior notice to improve the quality of

the product.

Figures in this manual are schematic and may not match the product exactly.

Values stated on the product labels or in the documentation accompanying it

are obtained in laboratory conditions in accordance with the relevant standards. Depending on operational and environmental conditions of the product, these values may vary.

2 Warnings

Please read the following information. Otherwise, there may be the risk of

personal injury or material damage.

Moreover, any warranty and reliability commitment will become void.

General Safety

• Never place your machine on a

carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine.

• If the power cable or mains plug is damaged you must call Authorized

Service for repair.

• Check water hoses for wear. Do not

use old/used water inlet hoses. These may cause stains on your laundry.

• Fit the drain hose into the discharge

housing securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned.

• Your washing machine is designed to

continue operating in the event of a power interruption. You cannot cancel any program by pressing the “On/Off button.” Your machine will not resume its program when the power restores. Press the “Start/Pause/Cancel” button for 3 seconds to cancel the program (See, Cancelling a Program)

• There may be some water in your

machine when you receive it. This is from the quality control process and is normal. It is not harmful to your machine.

• Some problems you may encounter

may be caused by the software. Press “Start/Pause/Cancel” button for 3 seconds to cancel the program set in your machine before calling the authorized service.

First Use

• To prepare your machine for washing,

carry out your first washing process without loading your machine and with detergent under “Cottons 90°C” program.

• Ensure that the cold and hot water

connections has been made correctly when installing your machine. Otherwise, your laundry may come out hot at the end of the washing process and may wear out.

• If the current fuse or circuit breaker is less than 16 Amperes, please have

a qualified electrician install a 16

Ampere fuse or circuit breaker.

• While using with or without a

transformer, do not neglect to have the grounding installation laid by a qualified electrician. Our company shall not be liable for any damages that may arise when the machine is used on a line without grounding.

• To make your machine ready for use,

please be sure that the tap water supply and water drainage systems are appropriate before calling the authorized service. If they are not, call a qualified plumber to have any necessary arrangements carried out.

Intended use

• This product has been designed for

home use.

• The appliance may only be used for

washing and rinsing of textiles that are marked accordingly.

• Only detergents, softeners and

supplements suitable for washing machines may be used.

• Observe the care instructions labelled

on textile products and any other instructions given by companies that produce detergents for your machine.

• This appliance is not intended for use

by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

Safety instructions

• This appliance must be connected to

an earthed outlet protected by a fuse of suitable capacity.

• The supply and draining hoses must

always be securely fastened and remain in an undamaged state.

• Fit the draining hose to a washbasin

or bathtub securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures!

• Never open the door or remove the

filter while there is still water in the drum. Otherwise, there may be the

risk of flooding and possible injury

due to the hot water.

• Never force open the locked door! The door will be ready to open just a

few minutes after the washing cycle comes to an end.

• Unplug the machine when it is not in

use.

• Never wash down the appliance

with a water hose! There is the risk

of electric shock! Always disconnect

from the mains by unplugging before cleaning.

• Never touch the plug with wet hands.

Never unplug by pulling on the cable, always pull out from the plug only. Do not operate the machine if the power cord or plug is damaged.

• Never attempt to repair the machine

yourself. Otherwise, you may be putting yours and other’s lives in danger.

• For malfunctions that cannot be

solved by information in the operating manual:

Turn off the machine, unplug it, turn

off the water tap and contact an authorized service agent.

it is operating. Do not let them tamper with the machine.

• Close the door when you leave the

area where the machine is located.

• Store all detergents in a safe place out

of reach of the children.

If there are children in your house...

• Electrical appliances may be dangerous for the children. Keep

children away from the machine when

3 Installation

Refer to the nearest Authorised Service Agent for installation of the product. To

make the product ready for use, review the information in the user manual and take care that the electricity, tap water supply and water drainage systems are

appropriate before calling the Authorized Service Agent. If they are not, call a

qualified technician and plumber to have any necessary arrangements carried out.

Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.

WARNING: Have the installation and

electrical connections of the product made by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

WARNING: Prior to installation,

visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

3.1 Appropriate

installation location

• Place the product on a rigid, flat and

level surface. Do not place it on a long

pile rug or similar surfaces.

• Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!

• Do not place the product on the power cable.

• Do not install the product at places where temperature may fall below 0ºC.

• Place the product at least 1 cm away

from the edges of other furniture.

• Do not place the product on a high

platform or near the edge on a cascaded surface.

3.2 Removing packaging reinforcement

Tilt the machine backwards to remove

the packaging reinforcement. Remove the

packaging reinforcement by pulling the ribbon.

3.3 Removing the transportation locks

WARNING: Do not remove the

transportation locks before taking out

A A

Loosen all the bolts with a suitable

2 Remove transportation safety bolts

the packaging reinforcement.

WARNING: Remove the transportation

safety bolts before operating the machine! Otherwise, the product will be damaged.

spanner until they rotate freely.

by turning them gently.

Attach the plastic covers supplied in

the User Manual bag into the holes on the rear panel

Keep the transportation safety bolts in

a safe place to reuse when the washing machine needs to be moved again in the future.

Never move the product without the

transportation safety bolts properly fixed in place!

3.4 Connecting to the

water supply

The water supply pressure required to run the product is between 1 to 10 bars

(0.1 – 1 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher.

If you are going to use the double waterinlet product as a single (cold) water-

inlet unit, you must install the supplied stopper to the hot water valve before operating the product. (Applies for the products supplied with a blind stopper group.)

WARNING: Models with a single water

inlet should not be connected to the hot

A A

1 Connect the special hoses supplied

water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.

WARNING: Do not use old or used

water inlet hoses on the new product. It may cause stains on your laundry.

with the product to the water inlets

on the product. Red hose (left) (max.

90 ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.

WARNING: Check that the cold and

hot water connections are made correctly

2 Tighten all hose nuts by hand. Never

3 Open the taps completely after

when installing the product. Otherwise, your laundry will come out hot at the end of the washing process and wear out.

use a tool when tightening the nuts.

making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the

tap and remove the nut. Retighten

the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.

3.5 Connecting to the drain

• Connect the end of the drain hose directly to the wastewater drain, sink or to the washbasin.

WARNING: Your house will be flooded

if the hose comes out of its housing

• Attach the hose at a height of at least

• In case the hose is elevated after

during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot come out.

40 cm, and 100 cm at most.

laying it on the floor level or close to the ground (less than 40 cm

above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.

100cm

40cm

• To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or do not drive it in the drain more than 15 cm. If it is too long, cut it short.

• Pay care not to bend the end of the hose, step on it or pinch the hose between the drain and the machine.

• If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

3.6 Adjusting the feet

WARNING: In order to ensure that

the product operates more silently

and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing, noise and vibration problems.

1 Loosen the lock nuts on the feet by

hand.

2 Adjust the feet until the product

stands level and balanced.

3 Tighten all lock nuts again by hand.

WARNING: Do not use any tools to

loosen the lock nuts. Otherwise, they

will get damaged.

3.7 Electrical connection

Connect the product to a grounded outlet

protected by a 16 A fuse. Our company

shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

• Connection must comply with national regulations.

• Power cable plug must be within easy reach after installation.

• If the current value of the fuse or breaker in the house is less than 16

Amps, have a qualified electrician install a 16 Amp fuse.

• The voltage specified in the "Technical

specifications" section must be equal to your mains voltage.

• Do not make connections via extension cables or multi-plugs.

WARNING: Damaged power cables

must be replaced by the Authorized

Transportation of the product

1 Unplug the product before

2 Remove water drain and water supply

3 Drain all water that has remained in

4 Install transportation safety bolts

Service Agents.

transporting it.

connections.

the product. See. 7.5

in the reverse order of removal procedure; see 3.3.

Never move the product without the

transportation safety bolts properly fixed in place!

WARNING: Packaging materials are

dangerous to children. Keep packaging materials in a safe place away from reach of the children.

4 Preparation

Things to be done for energy saving

Following information will help you use the product in an ecological and energyefficient manner.

• Operate the product in the highest

capacity allowed by the programme you have selected, but do not overload; see, "Programme and consumption table".

• Always follow the instructions on the

detergent packaging.

• Wash slightly soiled laundry at low

temperatures.

• Use faster programmes for small

quantities of lightly soiled laundry.

• Do not use prewash and high

temperatures for laundry that is not heavily soiled or stained.

• If you plan to dry your laundry in a

dryer, select the highest spin speed recommended during washing process.

• Do not use detergent in excess of

the amount recommended on the detergent package.

Sorting the laundry

• Sort laundry according to type of

fabric, colour, and degree of soiling and allowable water temperature.

• Always obey the instructions given on

the garment tags.

Washing water

temperature

Bleach can be

used

Suitable for drier

Hang without

spinning

Non machine-washable Do not wash

Dry-cleanable Do not dry-clean

Dry horizontally Dry on a hanger

Wash with sensitive,

.short programmes

Do not use bleach

Do not dry with drier

Can be ironed with

hot iron

Can be ironed

with warm iron

Do not iron

Preparing laundry for washing

• Laundry items with metal

attachments such as, underwired bras, belt buckles or metal buttons

will damage the machine. Remove

the metal pieces or wash the clothes by putting them in a laundry bag or pillow case.

• Take out all substances in the

pockets such as coins, pens and paper clips, and turn pockets inside

out and brush. Such objects may

damage the product or cause noise problem.

• Put small size clothes such as infant's

socks and nylon stockings in a laundry bag or pillow case.

• Place curtains in without compressing them. Remove curtain attachment

items.

• Fasten zippers, sew loose buttons

and mend rips and tears.

• Wash “machine washable” or “hand

washable” labeled products only with an appropriate programme.

• Do not wash colours and whites

together. New, dark coloured cottons release a lot of dye. Wash them separately.

• Tough stains must be treated properly

before washing. If unsure, check with a dry cleaner.

• Use only dyes/colour changers

and limescale removers suitable for

machine wash. Always follow the

instructions on the package.

• Wash trousers and delicate laundry

turned inside out.

• Keep laundry items made of Angora

wool in the freezer for a few hours before washing. This will reduce pilling.

• Laundry that are subjected to

materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before placing into the machine. Such dusts and powders on the laundry may build up on the inner parts of the machine in time and can cause damage.

Correct load capacity

The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired.

The machine automatically adjusts the

amount of water according to the weight of the loaded laundry.

Follow the information in the

“Programme and consumption

table”. When overloaded, machine's

washing performance will drop. Moreover, noise and vibration

problems may occur. Laundry types and their average weights in the following table are given as examples.

Laundry type Weight (g) Bathrobe 1200 Napkin 100 Duvet cover 700 Bed Sheet 500 Pillowcase 200 Tablecloth 250 Towel 200 Hand towel 100 Evening gown 200 Underclothing 100 Men’s overalls 600 Men’s shirt 200 Men’s pajamas 500 Blouses 100

Loading the laundry

• Open the loading door.

• Place laundry items loosely into the

machine.

• Push the loading door to close until

you hear a locking sound. Ensure that

no items are caught in the door.

The loading door is locked while a

programme is running. The door

can only be opened a while after the

programme comes to an end.

In case of misplacing the laundry,

noise and vibration problems may

occur in the machine.

Detergents and softeners

Detergent Drawer

Detergent drawer of your washing machine consists of four different compartments for powder main wash detergent, liquid main wash detergent, liquid softener and powder pre-wash detergent. Each of these laundry additives are dispensed automatically in the relevant time during the washing Programme.

Do not place the laundry additives directly

into the drum. Always use the detergent

drawer.

Do not close the drawer too fast after putting the laundry additives. This may cause the additives be dispensed early, creating unsatisfactory washing results and fabric damage.

Do not open the drawer during

washing Programme.

The detergent drawer compartments are indicated below:

1) Left compartment with number “II” (Main wash compartment for powder detergent or powder bleach/stain remover)

2) Left compartment with number “II ” (Main wash compartment for liquid detergent or liquid stain remover)

3) Middle compartment with number “I” (pre-wash compartment for powder detergent, powder stain remover or liquid bleach - liquid bleach must be added either during the pre-wash or during the first rinsing step of the washing Programme). Liquid bleach must be added manually while the machine takes in water.

4) Right compartment with “ ” symbol (liquid softener compartment)

(II) Main Wash Compartment

Before starting the washing Programme, put powder detergent into the left compartment with number “II”. Use the detergent manufacturer’s measuring cup and follow the instructions on the package. Powder bleach/stain remover must also be put into this compartment.

Put the liquid detergent into the main wash compartment with number “II ” before starting the washing Programme. Liquid stain remover must be put into this compartment. Put the suggested amount of liquid detergent into the left compartment with “II ” symbol and dilute it to the maximum filling level line (max. II ) with warm water. Particularly the concentrated detergents must be diluted with warm water; otherwise, the siphon may get clogged in time. Do not fill the detergent above the maximum filling level line; otherwise the excess amount of detergent will reach the laundry without water and may cause stains on the garments.In this case you will need to refill the compartment. Do not pour the detergent onto the laundry directly since this may cause stains on the garments.

Liquid Softener Compartment

Put the suggested amount of liquid

softener into the right compartment with “ ” symbol and dilute it to the maximum filling level line (max. ) with warm water.

Particularly the concentrated softeners must be diluted with warm water; otherwise, the siphon may get clogged in time. Do not fill the softener above the maximum filling level line; otherwise the excess amount of softener will get mixed with the washing water and you will need to refill the compartment. Do not pour the softener onto the laundry directly since this may cause stains on the garments. Liquid softener will be dispensed automatically at the final rinsing step of the washing Programme.

(I) Pre-Wash Compartment

Put the powder pre-wash detergent or powder stain remover into the middle compartment with number “I”. You can also put liquid bleach into this compartment while the machine takes in water during pre-wash or first rinsing

step. Adding the liquid bleach while

the machine takes in water allows it to be diluted before it is poured onto the laundry. You must select extra rinsing option if you use liquid bleach in a washing Programme. Bleach must be removed from the laundry with rinsing; otherwise it may cause itching on the skin.

Read the dosage instructions and

label of your garments carefully before using the liquid bleach.

Starch

• Add liquid starch, powder starch

or the dyestuff into the softener compartment as instructed on the package.

• Never use fabric softener and starch

together in the same washing cycle.

• Wipe the inside of the drum after

using starch.

Bleaches

If you are going to use regular bleach in your machine, it is suggested to select a Programme with pre-wash step and add the bleach at the beginning of the pre-wash without putting detergent into

the pre-wash compartment. Alternatively,

it is suggested to select a Programme with extra rinsing and add the bleach while the machine takes in water from the detergent drawer in the first rinsing step. Bleach should not be mixed with

detergent. Since the bleach may cause irritation on skin, little amounts must be used and rinsed thoroughly. Do not pour bleach directly onto the laundry and do not use it with colour laundry. When using oxygen based bleach, follow the instructions on the package and select a Programme at low temperature. Oxygen based bleach can be used together with the detergent. However, if it is not at the same thickness with the detergent, then it must be added from the compartment number “II” right after the detergent foams with water.

Eliminating lime formation

• When required, use only appropriate

lime removers developed specifically for washing machines and always follow the instructions on the package.

5 Operating the product

Control panel

6 7

2 3 4 5

1 - Spin Speed Adjustment button

2 - Display

3 - Temperature Adjustment button

4 - Programme Selection knob 5 - On / Off button 6 - Delayed Start buttons (+ / -)

7 - Auxiliary Function buttons

8 - Start / Pause / Cancel button

Display symbols

Heavily soiled white cottons

90˚C

60˚C

and linens. (coffee table covers, tableclothes, towels, bed sheets, etc.)

Normally soiled, coloured, fade proof cottons or synthetic clothes (shirt, nightgown,

pajamas, etc.) and lightly

soiled white linens (underwear, etc.)

a - Spin Speed indicator b - Temperature indicator c - Spin symbol d - Temperature symbol

e - Remaining Time and Delayed

Start indicator

f - Programme Indicator symbols

(Prewash / Main Wash / Rinse /

Softener / Spin) g - Economy symbol h - Delayed Start symbol i - Door Locked symbol

j - Start symbol

k - Pause symbol

l - Auxiliary Function symbols

m - No Water symbol

Preparing the machine

1. Make sure that the hoses are

connected tightly.

2. Plug in your machine.

3. Turn the tap on completely.

4. Place the laundry in the machine.

5. Add detergent and fabric softener.

Programme selection

1. Select the programme suitable for

the type, quantity and soiling degree of the laundry in accordance with the "Programme and consumption table" and the temperature table below.

40˚C30˚CCold

2. Select the desired programme with

Programmes are limited with the

When selecting a programme, always

Always select the lowest required

For further programme details, see

Blended laundry including delicate textile (veil curtains, etc.), synthetics and woolens.

the Programme Selection button.

highest spin speed appropriate for that particular type of fabric.

consider the type of fabric, colour, degree of soiling and permissible water temperature.

temperature. Higher temperature means higher power consumption.

"Programme and consumption table".

Main programmes

Depending on the type of fabric, use the following main programmes.

• Хлопок (Cottons)

Use this programme for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes, underwear, etc.). Your laundry will be washed with vigorous washing action for a longer washing cycle.

• Синтетика (Synthetics)

Use this programme to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). It washes with a gentle action and has a shorter washing cycle compared to the Cottons programme. For curtains and tulle, use the Synthetic 40˚C programme with prewash and

anti-creasing functions selected. As

their meshed texture causes excessive foaming, wash the veils/tulle by putting little amount of detergent into the main wash compartment. Do not put detergent in the prewash compartment.

• Шерсть (Woollens)

Use this programme to wash your woolen clothes. Select the appropriate temperature complying with the tags of your clothes. Use appropriate detergents for woolens.

Additional programmes

For special cases, additional programmes are available in the machine.

Additional programmes may differ

according to the model of the machine.

• Хлопок Эко (Cotton Economic)

Use this programme to wash your laundry washable in cottons programme for a longer time, still with a very good performance for saving purposes.

Cottons Eco programme consumes

less energy compared to other cottons programmes.

• BabyProtect (Защита)

Use this programme to wash baby laundry, and the laundry that belongs to allergic persons. Longer heating time and an additional rinsing step provide a higher level of hygiene.

• Ручная (Hand wash)

Use this programme to wash your woolen/delicate clothes that bear “not machine- washable” tags and for which hand wash is recommended. It washes laundry with a very gentle washing action to not to damage clothes.

• Ежедневная (Express)

Use this programme to wash your lightly soiled cotton clothes in a short time.

• Экспресс 14’ (Express 14)

Use this programme to wash your little amount of lightly soiled cotton clothes in a short time.

• Темные вещи (Darkwash)

Use this programme to wash your dark coloured laundry or the laundry that you do not want it get faded. Washing is performed with little mechanic action and at low temperatures. It is recommended to use liquid detergent or woolen

shampoo for dark coloured laundry.

• Микс 40 (Mix 40)

Use this programme to wash your cotton and synthetic clothes together without sorting them.

• Рубашки (Shirts)

Use this programme to wash the shirts made of cotton, synthetic and synthetic blended fabrics together.

• Освежающая (Freshen Up)

Use this programme to remove the odour on the laundry that are worn only for once and do not contain any stains or dirt.

• Экономичная 20º (Eco Clean)

Use this programme, which is much more sensitive to environment and natural resources, to wash your lightly soiled and unstained cotton laundry (max. 3.5 kg) in a short time and economically.

It is recommended to use liquid

detergent or gel washing detergent.

• Самоочистка (Self Clean)

Use this programme regularly (once in every 1-2 months) to clean the drum

and provide the required hygiene. Run

the programme without any laundry in the machine. To obtain better results, put powder limescale remover for washing machines into the detergent compartment II. When the programme is

over, leave the loading door ajar so that

the inside of the machine gets dry.

This is not a washing programme. It is

a maintenance programme.

Do not run the programme when

there is something in the machine. If you try to do so, the machine detects that there is a load inside and aborts the programme.

Special programmes

For specific applications, select any of the following programmes.

• Полоскание (Rinse)

Use this programme when you want to rinse or starch separately.

• Отжим+Слив (Spin + Drain)

Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine.

Before selecting this programme, select the desired spin speed and press Start / Pause / Cancel button. The machine will spin the laundry with the set spin speed and drain the water coming out of them. If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme and then select the No Spin function with the help of Spin

Speed Adjustment button. Press Start /

Pause / Cancel button.

Use a lower spin speed for delicate

laundries.

Temperature selection

Whenever a new programme is selected, the maximum temperature for the selected programme appears on the temperature indicator. To decrease the temperature, press

the Temperature Adjustment button.

Temperature decreases with increments of 10° and finally, “-” symbol indicating the cold wash option appears on the display.

Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator. To decrease the spin speed, press

the Spin Speed Adjustment button.

Spin speed decreases gradually. Then, depending on the model of the

product, "Rinse Hold" and "No Spin"

options appear on the display. See

"Auxiliary function selection" section for

explanations of these options.

Rinse Hold option is indicated with “

” symbol and No Spin option is

indicated with “ ” symbol.

If you scroll to cold wash option and

press Temperature Adjustment button

again, the recommended temperature for the selected programme appears on the display. Press the Temperature

Adjustment button again to decrease

the temperature.

Economy symbol

Indicates the programmes and temperatures that provide energy savings.

Economy symbol can not be selected

in Intensive and Hygiene programmes since washing is performed in long times and at high temperatures in order to provide hygiene. Similarly, Economy symbol can not be selected

in Baby, Refresh, Drum Cleaning, Spin and Rinse programmes as well.

Programme and consumption table

EN 2 Auxiliary functions

Programme (°C)

Max. Load (kg)

Water Consumption (l)

Energy Consumption (kWh)

Max. Speed***

Замачивание

Быстрая стирка

Дополнительное полоскание

Легкая глажка

Rinse Hold

Хлопок 90 7 74 2.30 1600 • • • • • • 90-Cold

Хлопок 60 7 72 1.50 1600 • • • • • • 90-Cold

Хлопок 40 7 72 0.85 1600 • • • • • • 90-Cold

BabyProtect (Защита) 90 7 66 2.70 1600 * • 90-30

Хлопок Эко 60** 7 52 1.19 1600 • • • • • • 60-Cold

Хлопок Эко 40 7 64 0.72 1600 • • • • • • 60-Cold

Синтетика 60 3 45 1.00 1000 • • • • • • 60-Cold

Синтетика 40 3 45 0.45 1000 • • • • • • 60-Cold

Экономичная 20 20 3.5 39 0.16 1600 • 20

Микс 40 40 3.5 45 0.55 1000 • • • • • • 40-Cold

Рубашки 40 3.5 45 0.55 800 • • • * • 60-Cold

Экспресс 14’ 30 2 35 0.10 1400 • • 30-Cold

Ежедневная 90 7 60 2.00 1400 • • 90-Cold

Ежедневная 60 7 60 1.15 1400 • • 90-Cold

Ежедневная 30 7 70 0.20 1400 • • 90-Cold

Шерсть 40 1.5 56 0.30 1000 • • 40-Cold

Ручная 30 1 40 0.25 1000 30-Cold

Темные вещи 40 3 82 0.55 1000 * • 40-Cold

Самоочистка 70 - 100 1.70 800 * 70

Освежающая - 2 20 0.03 1000 • -

Selectable

temperature range

°C

Pet hair removal

• : Selectable * : Automatically selected, no canceling.

** : Energy Label programme (EN 60456) *** If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed.

- : See the programme description for maximum load.

The auxiliary functions in the table may vary according to the model of your

machine.

Water and power consumption may vary subject to the changes in water pressure,

water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.

You can see the washing time of the programme you have selected on the display

of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time.

Auxiliary function selection

a b c d

Select the desired auxiliary functions before starting the programme. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme by pressing the Start / Pause / Cancel button when the machine is operating. For this, the machine must be in a step before the auxiliary function you are going to select or cancel. Depending on the programme, press a, b, c or d buttons to select the desired auxiliary function. Symbol of the selected auxiliary function appears on the display.

Some functions cannot be selected

together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain active. For example, if you want to select Quick Wash after you have selected the Prewash, Prewash will be canceled and Quick Wash will remain active.

An auxiliary function that is not

compatible with the programme cannot be selected. (See "Programme and consumption table")

Auxiliary Function buttons may

vary according to the model of the machine.

• Замачивание (Prewash)

A Prewash is only worthwhile for heavily

soiled laundry. Not using the Prewash will save energy, water, detergent and time. F1 appears on the display when you select this function (a).

• Быстрая стирка (Quick Wash)

This function can be used in Cottons and Synthetics programmes. It decreases the

washing times and also the number of rinsing steps for lightly soiled laundry. F2 appears on the display when you select this function (b).

When you select this function,

load your machine with half of the maximum laundry specified in the programme table.

• Дополнительное полоскание

(Rinse Plus)

This function enables the machine to make another rinsing in addition to the one already made after the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent remnants on the laundry can be reduced. F3 appears on the display when you select this function (c).

• Легкая глажка (Anti-Creasing)

This function creases the clothes lesser when they are being washed. Drum movement is reduced and spinning speed is limited to prevent creasing. In addition, washing is done with a higher water level. F4 appears on the display when you select this function (d).

• Rinse Hold

If you are not going to unload your clothes immediately after the programme completes, you may use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. Press Start / Pause /Cancel button after this process if you want to drain the water without spinning your laundry. Programme will resume and complete after draining the water. If you want to spin the laundry held in

water, adjust the Spin Speed and press

Start / Pause / Cancel button. The programme resumes. Water is drained, laundry is spun and the programme is completed.

• Soaking

The Soaking auxiliary function ensures better removal of stains ingrained into the clothes by holding them in the detergent water prior to startup of the programme.

Time display

Remaining time to complete the

programme appears on the display

+ 53 hidden pages

Beko WMI 71241 User manual [EN,RU]

Specifications and Main Features

Frequently Asked Questions

User Manual