Beko WMA 520 W User Manual

Automatic washing machine

installation & operating

instructions and washing guidance

WMA 520 S WMA 520 W

Due to the quality control processes applied to your machine during production, there may be some water left in your machine. This does not cause any damage.

Note that temperatures in this book are for guidance only. Always check the clothing labels before selecting your wash programme.

Recycling: This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For

further information, please contact your local or regional authorities.

Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.

contents

Introduction

Welcome 2

Installation

Know your washing machine/specification 4

Location 5

Installation 5

Electrical connection 7

Operating

How to use 8

Programme descriptions 12-13

Function buttons 13

ITCL fabric care symbols 13

Machine care

Care & maintenance 14

Before calling service/troubleshooting 16

Guarantee 17

Service 17

know your washing machine

Capacity (dry fabric) 5kg

Dimensions width x depth x height

60cm x 54cm x 85cm

Net weight 67 kg

Supply voltage 230 V~ 50Hz

Nominal current 10A

Motor power 300 watts

Heater power 2050 watts

Washing speed 52 rpm

Spin speed (max.) 1200 rpm

Because we continually strive to improve our products, we may change our specifications and designs without prior notice.

specification

Pump filter cover

Front Door

Kick plate

Top lid

Time delay

selection button

and indicator lights

Detergent and softener drawer

On/Off

button

Programme

Selection

knob

Start/Pause/Cancel

button

Program progress

indicator lights

Adjustable feet

Handle

Auxillary

Function

buttons

Time Delay

Ready Wash Spin/End

Prewash

Time Save

Extra Rinse

Start / Pause

Cancel

WMA 520 W

On/Off

40°

Delicates

Cold

Hand Wash

Drain

Spin

Rinse

30°

40º

Synthetics

Woollens

60°

40°

30°

Cottons60°

90°

40°

Intensive

40°

Intensive &

Stain 60°

No Spin

600

800

400

1000

1200

Time Delay

Ready Wash Spin/End

Prewash

Time Save

Extra Rinse

Start / Pause

Cancel

WMA 520 W

On/Off

40°

Delicates

Cold

Hand Wash

DrainRinse

30°

40º

Synthetics

Woollens

60°

40°

30°

Cottons60°

90°

40°

Spin

Intensive

40°

Intensive &

Stain 60°

Spin

600

800

400

1000

1200

location

installation

You can locate the washing machine anywhere (except bathrooms, showers and away from rain, damp places and water) as long as you have cold water supply, drainage and electrical connection alongside.

Ensure there is clearance each side of the machine to allow slight side ways movement during washing and spin drying.

Attention!

Never place your machine on a carpet. This prevents air circulation. The electrical components of the machine may overheat and may cause damage.

Please ensure the power, water supplies and waste are suitable, if in doubt, consult a qualified plumber or electrician.

Different methods of floor construction can result in an increase in vibration/noise during spin modes.

If these symptoms are experienced please ensure firstly that all four feet are in firm contact with the floor to minimise any out of balance vibration which may be generated.

Additional information is available by request.

In addition to this, washing machines should not be installed on carpet, foam backed laminate, or parquet flooring where the nature of these types of flooring can also contribute to the inefficient operation of the washing machine on the spin cycle.

Removing transport safety bolts

The transport safety bolts must be removed

before any operation of the machine.

Turn the bolt heads C anti-clockwise until the bolt can be partially withdrawn.

Remove them and the rubber bushes by pulling outwards. An up/down action and a small squirt of washing up liquid will ease removal.

Plastic plugs, supplied inside the protective bag, designated P, should be placed in the safety bolt holes as shown.

Attention! Keep the safety bolts for future transportation and reinstate them before transporting your machine. Never transport your machine without the transport bolts in position. Any resultant damage is not covered by the warranty.

+ 14 hidden pages