Beko WMA520 User Manual

installation & operating

Automatic

instructions and washing guidance

washing machine

WMA 520 S WMA 520 W

Due to the quality control processes applied to your machine during production, there may be some water left in your machine. This does not cause any damage.

Note that temperatures in this book are for guidance only. Always check the clothing labels before selecting your wash programme.

Recycling: This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For

further information, please contact your local or regional authorities.

Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.

contents

Introduction

Welcome 2

Installation

Know your washing machine/specification 4

Location 5

Installation 5

Electrical connection 7

Operating

How to use 8

Programme descriptions 12-13

Function buttons 13

ITCL fabric care symbols 13

Machine care

Care & maintenance 14

Before calling service/troubleshooting 16

Guarantee 17

Service 17

know your washing machine

Top lid

90°

60°

Cottons

40°

Synthetics

30°

40°

Woollens

Cold

Hand Wash

Rinse

No Spin

40°

Intensive &

Stain 60°

Intensive

40°

1200

40º

Delicates

800

1000

30°

Drain

Spin

Time

Extra

Start / Pause

Prewash

Save

Rinse

Cancel

400

Time

Delay

600

Ready Wash Spin /End

On/Off

WMA 520 W

Front Door

Kick plate

Programme

Selection

knob

60°

40°

Synthetics

30°

40°

Woollens

Cold

Hand Wash

Rinse

Adjustable feet

and indicator lights

90°

60°

Cottons

40°

Intensive &

Stain 60°

Intensive

40º

Delicates

30°

Spin

Drain

Time delay

selection button

Spin

400

40°

1200

1000

600

800

Handle

Pump filter cover

Start/Pause/Cancel

button

Time

Prewash

Save

Ready Wash Spin/End

Time Delay

Start / Pause

Cancel

Auxillary Function

buttons

Extra Rinse

On/Off

WMA 520 W

Detergent and softener drawer

specification

Capacity (dry fabric) 5kg Dimensions width x depth x height

Net weight 67 kg Supply voltage 230 V~ 50Hz Nominal current 10A Motor power 300 watts Heater power 2050 watts Washing speed 52 rpm Spin speed (max.) 1200 rpm

60cm x 54cm x 85cm

Program progress

indicator lights

Because we continually strive to improve our products, we may change our specifications and designs without prior notice.

On/Off button

location

You can locate the washing machine anywhere (except bathrooms, showers and away from rain, damp places and water) as long as you have cold water supply, drainage and electrical connection alongside.

Ensure there is clearance each side of the machine to allow slight side ways movement during washing and spin drying.

Attention!

Never place your machine on a carpet. This prevents air circulation. The electrical components of the machine may overheat and may cause damage.

Please ensure the power, water supplies and waste are suitable, if in doubt, consult a qualified plumber or electrician.

Different methods of floor construction can result in an increase in vibration/noise during spin modes.

If these symptoms are experienced please ensure firstly that all four feet are in firm contact with the floor to minimise any out of balance vibration which may be generated.

Additional information is available by request.

In addition to this, washing machines should not be installed on carpet, foam backed laminate, or parquet flooring where the nature of these types of flooring can also contribute to the inefficient operation of the washing machine on the spin cycle.

installation

Removing transport safety bolts

The transport safety bolts must be removed

before any operation of the machine.

1 Turn the bolt heads C anti-clockwise until

the bolt can be partially withdrawn.

2 Remove them and the rubber bushes by

pulling outwards. An up/down action and a small squirt of washing up liquid will ease removal.

3 Plastic plugs, supplied inside the protective

bag, designated P, should be placed in the safety bolt holes as shown.

Attention! Keep the safety bolts for future transportation and reinstate them before transporting your machine. Never transport your machine without the transport bolts in position. Any resultant damage is not covered by the warranty.

+ 14 hidden pages