Behringer PM1 Instruction Manual

Product Information Document
In-Ear Monitor Systems
POWERPLAY PM 1
Personal In-Ear Monitor Belt-Pack
In-ear monitor belt-pack for
#
personal monitor applications
#
XLR input with locking mechanism
#
3.5 mm mini jack headphones
#
connector
Convenient belt-pack clip included
#
“Built-like-a-tank”, impact-resistant
#
metal chassis
3-Year Warranty Program*
#
Designed and engineered
#
in Germany
Whether you’re a keyboardist,
drummer, or any other musician whose
performance keeps them anchored
in one spot, the PM1 was designed
speci cally for you. A convenient hard-
wired personal in-ear control center,
the PM1’s belt pack puts monitor
control right at your  ngertips, plus
it’s lightweight, ultra-easy to use – and
it doesn’t require a power source!
Volume Control
The PM1 features an extremely high-quality volume control for dialing in the perfect level every time. Designed for long life and super­smooth performance, this detented control stays where you put it.
*Warrant y details can be fo und at music-group.c om.
BEHRINGER HA8000
TRS
XLR male
Product Information Document
In-Ear Monitor Systems
POWERPLAY PM 1
Personal In-Ear Monitor Belt-Pack
Locking XLR Input
Because your monitor is crucial to your performance, PM1’s XLR input connec tor accepts standard mic cables and features a locking mechanism to prevent accidental disconnects. Just press the tab next to the bottom-mounted connector to release the cable at the end of the gig. It is important to note that PM1's XLR input is not designed to accept balanced line signals taken directly from your mixer, as an ampli ed source is required. For connecting a stereo source, such as your headphone ampli er or mixer's headphone output, you should use a TRS-to-XLR (male to male) cable.
3.5 mm Phones Jack
You can use your favorite headphones, earbuds or custom-molded professional In-Ear Monitors (IEMs) with the PM1, thanks to the top-mounted, standard 3.5 mm (⁄") stereo output jack.
Handy Belt Clip
When you do need to move around, say to change your amp or stomp settings, PM1’s built-in belt clip will always keep it close at hand. Just slip the PM1 onto your waistband or belt and let the good times roll!
2 of 5
Loading...
+ 3 hidden pages