Behringer PB100 User Manual
PREAMP/BOOSTER PB100
Preamplier/Volume Booster
Thank you for show ing your condence in us by purchasing the BEHRINGER PRE AMP BOOSTER PB100.
This high-quality e ects pedal can be us ed to boost the volume and shape the sound of any instrument.
Thanks to it s high-performance features you will be able to match Piezo pickups to regular amp inputs or
boost volume while playing solo part s.
1. Controls
(4)
(1)
(3)
(2)
(7)
(6)
(5)
(1) The BASS control allows you to adjust the low-frequency range of the signal.
(2) The TREBLE control allows you to adjust the high-frequenc y range of the signal.
(3) The GAIN control adjusts the amount of preamplication.
(4) The ON /BATT LED illuminates when the eect is activated. It also serves as a
batter y level indicator.
(5) Use the footswitch to ac tivate/deactivate the eect.
(6) Use this ¼" TS IN connector to plug in the instrument c able.
(7) The ¼" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V bat tery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be caref ul not to
scratch the unit.
◊ The PB100 has no on/o switch. As soon as you insert the jack into the in connec tor,
the PB100 begins running. When not using the PB100, remove the jack f rom the
in connec tor. This extends the li fe of the battery.
The SERIAL NUMBER is located at the bottom.
PREAMP/BOOSTER PB100
2. Safety Instructions
Do not use near water, or install near heat s ources. Use only authorize d attachments/accessories.
Do not service produc t yourself. Contact our qualied servicing personnel for servicing or rep airs,
especially w hen power supply cord or plug is damaged.
3. Warranty
Please regis ter your new BEHRINGER equipment right after your purchas e by visiting
http://behringer.com and read the terms and conditions of our warranty care fully.
4. Specications
In
Connec tor ¼" TS
Impedanc e 500 kΩ
Out
Connec tor ¼" TS
Impedanc e 1 kΩ
Power Supply
9 V𝌂, 100 mA regulated
BEHRINGER PSU-SB
PSU-SB-CN 220 VAC adaptor Chi na
BEHRINGER
PSU-SB-EU 230 VAC adaptor E urope
BEHRINGER
PSU-SB-JP 100 VAC adaptor Japa n
BEHRINGER
PSU-SB-SAA 240 VAC adaptor Aust ralia
BEHRINGER
PSU-SB-UK 240 VAC adaptor UK
BEHRINGER
PSU-SB-UL 115 VAC adaptor USA
BEHRINGER
Power connec tor 2 mm DC jack,
negative center
Batter y 9 V type 6LR 61
Power consumption 30 mA
Physical/Weight
Dimensio ns approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 5 4 x 70 x 123 mm
Weight approx. 0.73 lb s / 0.33 kg
BEHRING ER is constant ly strivin g to maintain the
highes t professio nal standard s. As a result of t hese eff orts,
modifi cations may be m ade from tim e to time to exis ting
produc ts withou t prior notice . Specific ations and app earance
may there fore diff er from thos e listed or show n.
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE
MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS
ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR
IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands
Loading...