Bauknecht GSI 4941 R WS, GSI 4941 R-SW, GSI 4941 R-IX Quick Reference Guide

0 (0)
Bauknecht GSI 4941 R WS, GSI 4941 R-SW, GSI 4941 R-IX Quick Reference Guide

GB

GSF 4941

PROGRAMME CHART

 

 

 

Important:

• If a fault occurs or you wish to change the current programme, press the “START” button for about 5 seconds until the Start indicator lamp switches off ! Refer to the “Troubleshooting guide” in these user instructions to remedy any problems.

• Switch off the dishwasher once the “Start” indicator lamp has switched off. If you switch off the dishwasher during a wash cycle, when switched on again the dishwasher resumes the cycle from where it was interrupted.

Start

Start button indicator lamp:

 

 

Switches “on” when the dishwasher

 

 

is operating.

 

 

Flashes when a fault occurs.

 

 

Switches off at the end of the pro-

 

 

gramme.

 

 

Programme selector

 

 

off

Rinsing

Rinse aid level indicator

agent

Add rinse aid

 

 

 

Final rinse

Detergent dispenser:

 

 

 

Consumption ***

 

 

tempera-

+) with pre-rinse

 

 

 

 

 

 

 

 

 

 

Normal load

 

 

 

 

Programme

Load

ture:

-) without pre-rinse

 

 

 

 

 

 

Crockery and cutlery

 

** small

large

 

 

 

 

 

 

 

 

 

 

Water

Energy

 

Time

 

 

 

 

 

 

compart-

compart-

 

 

 

 

 

 

 

(Liter)

(kWh)

 

(Min.)

 

 

 

 

 

 

ment

ment

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-rinse

Crockery to be washed later

-

-

-

5.0

0.02

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bio-Eco 50 °C *

Normally soiled crockery, with dried-on food

65 °C

+

+

17.0

1.35

 

85

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Daily 65 °C *

Normally or heavily soiled crockery with dried-on food

65 °C

-

+

13.0

1.45

 

73

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Normal 65 °C 1)

Normally or heavily soiled crockery

65 °C

+

+

17.0

1.50

 

85

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*) Recommended programme for use with “new generation” enzyme-based detergents. **) For pre-rinse.

***) Values for normal conditions. Values may vary in relation to usage, e.g.: different loads, water temperatures, water hardness and power supply voltage. 1) Consult the programme on the energy data plate.

5019 100 90056

Loading...
+ 1 hidden pages