Bang Olufsen Beocenter 9300 Owners Manual
Untitled-1 27-06-00, 13:271
BEOCENTER 9300
2
CAUTION: To reduce the risk
of electric shock, do not
remove cover (or back).
No User-serviceable parts
inside. Refer servicing to
qualified service personnel.
WARNING: To prevent fire or electric
shock, do not expose this appliance to
rain or moisture.
This symbol indicates that a
dangerous voltage constituting a risk of electric shock is
present within this unit.
This symbol indicates that
there are important operating
and maintenance instructions
in the literature accompanying
this unit.
For the US-market only!
NOTE: This equipment has been tested and found
to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Untitled-1 27-06-00, 13:272
BEFORE YOU START
3
This setting-up guide explains how to set up your
Beocenter 9300 and make it ready for use.
We recommend that you follow the instructions in this
guide carefully.
See the Beocenter 9300 User’s guide (also enclosed) for
detailed operating instructions.
Contents
4 Placement
5 Connections
8 Ready for Use
10 Maintenance
12 International Guarantee
NOTE!
Do not connect the Beocenter to
the mains until you have finished
the setting-up procedure.
Untitled-1 27-06-00, 13:273
4
PLACEMENT
Place the Beocenter 9300 standing on a solid, horizontal
surface.
Avoid placing your Beocenter in direct sunlight, near
radiators or other sources of heat. Do not place the
Beocenter on a carpet as this could block the ventilation
holes.
Transport protection
IMPORTANT! Before using the
Beocenter 9300 the two transport
protection screws for the CD drive
mechanism must be removed.
Otherwise, you may cause damage
to the CD player!
Remove the two screws using a screwdriver and place
them in the two holes labelled PLAY for safekeeping.
If you ever have to transport the Beocenter, we strongly
recommend that you re-insert the two transport screws in
the holes labelled TRANSPORT.
Untitled-1 27-06-00, 13:274
CONNECTIONS
5
Local Control
System (MCL)
Right Left
Passive
speakers
Active
speakersAM aerial
Connect loudspeakers, aerial(s),
and any other units to the
Beocenter before connecting it
to the mains.
FM aerial
To gain access to the sockets, lift up the hinged grille at the
rear edge of the Beocenter 9300.
Aerial
In order to obtain optimal reception of radio stations it is
essential to use the correct type of aerial (FM and/or AM)
or cable net connection. Please let your Bang & Olufsen
dealer advise you.
Connect your FM signal to the socket marked FM and your
AM signal, if any, to the socket marked AM.
Untitled-1 27-06-00, 13:275
Compatible Bang
& Olufsen TV, or
other auxiliary
equipment
* LINE IN/OUT - type 2518 only.
Do not remove dummy plug if
not in use!
recorder or record
Second Bang &
Olufsen tape
player
Loading...