Asus XG32VC User Manual

XG32VCXG32VC

CURVED GAMING MONITOR

Table of contents

Notices ......................................................................................................... iii

Safety information ...................................................................................... iv

Care & Cleaning ........................................................................................ viii

1.1 Welcome ....................................................................................... 1-2

1.2 Package contents ......................................................................... 1-2

1.3 Assembling the monitor .............................................................. 1-3

1.4 Connect cables ............................................................................. 1-4

1.4.1 Rear of the LCD monitor ................................................. 1-4

1.5 Monitor introduction .................................................................... 1-5

1.5.1 Using the Controls button .............................................. 1-5

2.1 Adjusting the monitor .................................................................. 2-1

2.2 Outline dimension ........................................................................ 2-2

2.3 Detaching the arm/stand (for VESA wall mount) ............ 2-3

3.1 OSD (On-Screen Display) menu ................................................. 3-1

3.1.1 Howtorecongure .......................................................... 3-1

3.1.2 OSD Function Introduction .............................................. 3-2

3.2 Specications ............................................................................. 3-10

3.3 Troubleshooting (FAQ) .............................................................. 3-11

3.4 Supported Timing List ............................................................... 3-12

Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.

ii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to
the graphics card is required to assure compliance with FCC

regulations.Changesormodicationstothisunitnotexpressly

approved by the party responsible for compliance could void the
user’s authority to operate this equipment.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

This Class B digital apparatus meets all requirements of the Canadian Interference

-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du
Réglement sur le matériel brouiller du Canada.

iii

Safety information

• Before setting up the monitor, carefully read all the documentation that

came with the package.

• To prevent fire or shock hazard, never expose the monitor to rain or

moisture.

• Never try to open the monitor cabinet. The dangerous high voltages

inside the monitor may result in serious physical injury.

• If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

• Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.

• Slots and openings on the back or top of the cabinet are provided for

ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.

• The monitor should be operated only from the type of power source

indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.

• Use the appropriate power plug which complies with your local power

standard.

• Do not overload power strips and extension cords. Overloading can

result in fire or electric shock.

• Avoid dust, humidity, and temperature extremes. Do not place the

monitor in any area where it may become wet. Place the monitor on a
stable surface.

• Unplug the unit during a lightning storm or if it will not be used for a

long period of time. This will protect the monitor from damage due to
power surges.

• Never push objects or spill liquid of any kind into the slots on the

monitor cabinet.

• To ensure satisfactory operation, use the monitor only with UL listed

computers which have appropriate configured receptacles marked
between 100 ~ 240V AC.

• The socket-outlet shall be installed near the equipment and shall be

easily accessible

• If you encounter technical problems with the monitor, contact a

qualified servicer.

• Provide an earthing connection before the mains plug is connected to

the mains. And, when disconnecting the earthing connection, be sure
to disconnect after pulling out the mains plug from the mains.

• Please use ADP-90LE BA adapter.

iv

• Please confirm the distribution system in building installation shall

provide the circuit breaker rated 120/240V, 20A (maximum).

• If provided with a 3-pin attachment plug on the power cord, plug the

cord into a grounded (earthed) 3-pin outlet. Do not disable the power
cord grounding pin, for example, by attaching a 2-pin adapter. The
grounding pin is an important safety feature.

• Stability Hazard. The product may fall, causing serious personal injury

or death. To prevent injury, this product must be securely attached
to the floor/wall in accordance with the installation instructions. A
product may fall, causing serious personal injury or death. Many
injuries, particularly to children, can be avoided by taking simple
precautions such as: ALWAYS use cabinets or stands or installation
methods recommended by the manufacturer of the product set.
ALWAYS use furniture that can safely support the product. ALWAYS
ensure the product is not overhanging the edge of the supporting
furniture.ALWAYS educate children about the dangers of climbing
on furniture to reach the product or its controls. ALWAYS route cords
and cables connected to your product so they cannot be tripped over,
pulled or grabbed. NEVER place a product in an unstable location.
NEVER place the product on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the product to a
suitable support. NEVER place the product on cloth or other materials
that may be located between the product and supporting furniture.
NEVER place items that might tempt children to climb, such as toys
and remote controls, on the top of the product or furniture on which the
product is placed. If the existing product is going to be retained and
relocated, the same considerations as above should be applied.

Stability Hazard

• The product may fall, causing serious personal injury or death. To

prevent injury, this product must be securely attached to the floor/wall
in accordance with the installation instructions.

• A product may fall, causing serious personal injury or death. Many

injuries, particularly to children, can be avoided by taking simple
precautions such as:

• ALWAYS use cabinets or stands or installation methods recommended

by the manufacturer of the product set.

• ALWAYS use furniture that can safely support the product.

• ALWAYS ensure the product is not overhanging the edge of the

supporting furniture.

• ALWAYS educate children about the dangers of climbing on furniture

to reach the product or its controls.

• ALWAYS route cords and cables connected to your product so they

cannot be tripped over, pulled or grabbed.

• NEVER place a product in an unstable location.

v

• NEVER place the product on tall furniture (for example, cupboards or

bookcases) without anchoring both the furniture and the product to a
suitable support.

• NEVER place the product on cloth or other materials that may be

located between the product and supporting furniture.

• NEVER place items that might tempt children to climb, such as toys

and remote controls, on the top of the product or furniture on which the
product is placed.

• If the existing product is going to be retained and relocated, the same

considerations as above should be applied.

WARNING

Usageofotherthanspeciedhead-orearphonescanresultinhearing

loss due to excessive sound pressures.

Restriction on Hazardous Substances statement (India)

This product complies with the “India E-Waste (Management) Rules, 2016”
and prohibits use of Lead, Mercury, Hexavalent Chromium, polybrominated
biphenyls(PBBs) and polybrominated diphenyl ethers(PBDEs) in
concentration exceeding 0.1% by weight in homogenous materials
and 0.01% by weight in homogenous materials for cadmium, except of
exemptions listed in Schedule 2 of the Rule.

vi

Prevent Tipping

Cord or chain

M4 or M6 Screw

Cord

1

2

When using the display, fasten the LCD to a wall using a cord or chain that can
support the weight of the monitor in order to prevent the monitor from falling.

• Display design may differ from those illustrated.

• Installing must be done by a qualified technician , and please

contact your supplier for more information.

• For the Models with net weight >=7kg. Please select the suitable

way to Prevent Tipping.

• For the models with VESA Mount, please use method , install

the screws with ring to the VESA Mount hole, then tie the cord
or chain to the wall. Otherwise, please use method to tie the
cord or chain to the stand and then fix it to the wall.

vii

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the

cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.

• Cleaning. Turn your monitor off and unplug the power cord. Clean the

monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.

• Avoid using a cleaner containing alcohol or acetone. Use a cleaner

intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.

This symbol of the crossed out wheeled bin indicates that the
product (electrical, electronic equipment, and mercury-containing
button cell battery) should not be placed in municipal waste.
Please check local regulations for disposal of electronic products.

AEEEyönetmeliğineuygundur

The following symptoms are normal with the monitor:

• The screen may flicker during the initial use due to the nature of the

fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.

• You may find slightly uneven brightness on the screen depending on

the desktop pattern you use.

• When the same image is displayed for hours, an afterimage of the

previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.

• When the screen becomes black or flashes, or cannot work anymore,

contact your dealer or service center to fix it. Do not repair the screen
by yourself!

Conventions used in this guide

WARNING: Information to prevent injury to yourself when trying to
complete a task.

CAUTION: Information to prevent damage to the components
when trying to complete a task.

IMPORTANT: Information that you MUST follow to complete a
task.

NOTE: Tips and additional information to aid in completing a task.

viii

Wheretondmoreinformation

Refer to the following sources for additional information and for product
and software updates.

1. ASUS websites

The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com

2. Optional documentation

Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.

ASUS LCD Monitor XG Series

1-1