Asrock Mars 5000U Series User Manual (FP6D4-P2)

Version 1.0
Published November 2021
is device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)
e terms HDMI® and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
INTEL END USER SOFTWARE LICENSE AGREEMENT
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
LICENSE. Licensee has a license under Intel’s copyrights to reproduce Intel’s Soware only in its unmodied and binar y form, (with the accompanying documentation, the “Soware”) for Licensee’s personal use only, and not commercial use, in connection with Intel-based products for which the Soware has been provided, subject to the following conditions:
(a) Licensee may not disclose, distribute or transfer any part of the Soware, and You agree to prevent unauthorized copying of the Soware.
(b) Licensee may not reverse engineer, decompile, or disassemble the Soware.
(c) Licensee may not sublicense the Soware.
(d) e Soware may contain the soware and other intellectual property of third part y suppliers, some of which may be identied in, and licensed in accordance with, an enclosed license.txt le or other text or le.
(e) Intel has no obligation to provide any support, technical assistance or updates for the Soware.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Soware remains with Intel or its licensors or suppliers. e Soware is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. Licensee may not remove any copyright notices from the Soware. Except as other wise expressly provided above, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. Transfer of the license termi­nates Licensee’s right to use the Soware.
DISCLAIMER OF WARRANTY. e Soware is provided “AS IS” without warranty of any kind, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PUR­POSE.
LIMITATION OF LIABILITY. NEITHER INTEL NOR ITS LICENSORS OR SUPPLIERS WILL BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF BUSINESS, OR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAG
ES OF ANY KIND WHETHER UNDER THIS AGREEMENT OR OTHERWISE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
LICENSE TO USE COMMENTS AND SUGGESTIONS. is Agreement does NOT obligate Licensee to provide Intel with comments or suggestions regarding the Soware. However, if Licensee provides Intel with comments or suggestions for the modication, correction, improvement or enhancement of (a) the Soware or (b) Intel products or processes that work with the Soware, Licensee grants to Intel a non-exclusive, worldwide, perpetual, irrevocable, transferable, royalty-free license, with the right to sublicense, under Licensee’s intellectual property rights, to incorporate or otherwise utilize those comments and suggestions.
TERMINATION OF THIS LICENSE. Intel or the sublicensor may terminate this license at any time if Licensee is in breach of any of its terms or conditions. Upon termination, Licensee will immediately destroy or return to Intel all copies of the Soware.
THIRD PARTY BENEFICIARY. Intel is an intended beneciar y of the End User License Agreement and has the right to enforce all of its terms.
U.S. GOVERNMENT RESTRICTED RIGHTS. e Soware is a commercial item (as dened in 48 C.F.R. 2.101) consisting of commercial computer soware and commercial computer soware documentation (as those terms are used in 48 C.F.R. 12.212), consistent with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1 through 227.7202-4. You will not provide the Soware to the U.S. Government. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95054.
EXPORT LAWS. Licensee agrees that neither Licensee nor Licensee’s subsidiaries will export/re-export the Soware, directly or indirectly, to any country for which the U.S. Department of Commerce or any other agency or department of the U.S. Government or the foreign government from where it is shipping requires an export license, or other governmental approval, without rst obtaining any such required license or approval. In the event the Soware is exported from the U.S.A. or re-exported from a foreign destina­tion by Licensee, Licensee will ensure that the distribution and export/re-export or import of the Soware complies with all laws, regulations, orders, or other restrictions of the U.S. Export Administration Regulations and the appropriate foreign government.
APPLICABLE LAWS. is Agreement and any dispute arising out of or relating to it will be governed by the laws of the U.S.A. and Delaware, without regard to conict of laws principles. e Parties to this Agreement exclude the application of the United Nations Convention on Contracts for the International Sale of Goods (1980). e state and federal courts sitting in Delaware, U.S.A. will have exclusive jurisdiction over any dispute arising out of or relating to this Agreement. e Parties consent to persona l jurisdiction and venue in those courts. A Party that obtains a judgment against the other Party in the courts iden­tied in this section may enforce that judgment in any court that has jurisdiction over the Parties.
Licensee’s specic rights may vary from country to country.
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Motherboard Layout 5
1.4 Front Panel 7
1.5 Rear Panel 8
Chapter 2 Installation 9
2.1 Installing Memory Modules (SO-DIMM) 10
2.2 Onboard Headers and Connectors 11
2.3 Smart Switch 12
2.4 M.2 WiFi/BT Module Installation Guide 13
2.5 M.2_SSD (NGFF) Module Installation Guide (M2_1) 15
Chapter 3 Auto Driver Installer 17
Chapter 4 UEFI SETUP UTILITY 18
4.1 Introduction 18
4.1.1 UEFI Menu Bar 18
4.1.2 Navigation Keys 19
4.2 Main Screen 20
4.3 OC Tweaker Screen 21
4.4 Advanced Screen 23
4.4.1 CPU Conguration 24
4.4.2 Onboard Devices Conguration 25
4.4.3 Storage Conguration 27
4.4.4 ACPI Conguration 28
4.4.5 Trusted Computing 29
4.5 Tools 30
4.6 Hardware Health Event Monitoring Screen 31
4.7 Security Screen 32
4.8 Boot Screen 33
4.9 Exit Screen 35
6 1
Chapter 1 Introduction
ank you for purchasing FP6D4-P2 motherboard. In this documentation, Chapter
1 and 2 contains the introduction of the motherboard and step-by-step installation
guides. Chapter 3 contains the operation guide of the soware and utilities. Chapter
4 contains the conguration guide of the BIOS setup.
Becau se the motherboard specications and the BIOS soware might be updated, the content of this documentation will be subject to change without notice.
Becau se the motherboard specications and the BIOS soware might be updated, the content of this documentation will be subject to change without notice.
1.1 Package Contents
FP6D4-P2 Motherboard
•
FP6D4-P2 Quick Installation Guide
•
1 x Screw for M.2 Socket (M2*2) (Optional)
•
1 x Screw for WiFi Module (M2*2) (Optional)
•
FP6D4-P2
English
1.2 Specications
Platform
CPU
Chipset
Memory
•
•
•
•
•
•
•
•
7.0-in x 5.7-in, 17.8 cm x 14.5 cm
Supports AMD FP6 Lucienne
3 Power Phase design
SOC
Dual Channel DDR4 Memory Technology
2 x DDR4 SO-DIMM Slots
Supports DDR4 3200/2933/2800/2666/2400/2133 non-ECC,
un-buered memory
Max. capacity of system memory: 64GB
English
Expansion Slot
Graphics
1 x M.2 Socket (Key E), supports ty pe 2230 WiFi/BT module
•
Integrated AMD RadeonTM Vega Series Graphics in Ryzen
•
Series APU*
* Actual support may vary by CPU
DirectX 12, Pixel Shader 5.0
•
Shared memory default 2GB.
•
Dual graphics output: support D-Sub and HDMI ports by
•
independent display controllers
Supports HDMI with max. resolution up to 4K@ 60Hz
•
Supports D-Sub with max. resolution up to 1920x1200 @
•
60Hz
Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
•
HBR (High Bit Rate Audio) with HDMI 1.4 Port (Compliant
HDMI monitor is required)
Supports HDCP 2.3 with HDMI 1.4 Port
•
2 3
Audio
LAN
Front Panel I/O
Rear Panel I/O
Realtek ALC233 Audio Codec
•
1 x Headphone/Headset Jack
•
1 x MIC-In
•
PCIE x1 Gigabit LAN 10/100/1000 Mb/s
•
Realtek RTL8111H
•
Supports Wake-On-LAN
•
Supports Lightning/ESD Protection
•
Supports Energy Ecient Ethernet 802.3az
•
Supports PXE
•
1 x Power Button
•
2 x USB 3.2 Gen1 Type-A Ports (Support ESD Protection)
•
1 x USB 3.2 Gen1 Type-C Port (Supports ESD Protection)
•
2 x USB 2.0 Ports (Supports ESD Protection)
•
* USB_3_QC supports supports Quick Charge.
1 x SD Card Socket
•
1 x DC Jack (Compatible with the 19V power adapter)*
•
1 x D-Sub Port
•
1 x HDMI Port
•
2 x USB 3.2 Gen1 Type-A Ports (Support ESD Protection)
•
1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
•
LED)
1 x Headphone Jack
•
1 x Microphone Input Jack
•
FP6D4-P2
Storage
Connector
BIOS Feature
1 x SATA3 6.0 Gb/s with Power Connector , support NCQ,
•
AHCI and Hot Plug*
1 x Ultra M.2 Socket (M2_1), supports ty pe 2260/2280 M.2
•
SATA3 6.0 Gb/s module and M.2 PCI Express module up to
Gen3 x4 (32 Gb/s)*
* Supports NVMe SSD as boot disks
1 x CPU Fan Connector (4-pin)
•
AMI UEFI Legal BIOS with multilingual GUI support
•
ACPI 6.0 Compliant wake up events
•
SMBIOS 2.7 Support
•
English
Hardware Monitor
OS
Certica­tions
CPU Temperature Sensing
•
CPU Fan Tachometer
•
CPU Quiet Fan (Auto adjust chassis fan speed by CPU
•
temperature)
CPU Fan Multi-Speed Control
•
Voltage monitoring: CPU Vcore, VCCM, +5V, +3.3V
•
Microso® Windows® 10 64-bit / 11 64-bit
•
FCC, CE
•
ErP/EuP ready (ErP/EuP ready power supply is required)
•
English
4 5
3
1.3 Motherboard Layout
VGA1
HDMI 1
1
CPU_FAN1
USB 3.2 Gen1 T: USB_6 B: USB_5
RJ-45
DC Jack
Headphone
1
DDR4_A1
DDR4_B1
FP6D4-P2
RoHS
FP6D4-P2
Power Button
USB 3.2 Gen1 T: USB_2 USB2.0 B: USB_1
USB 3.2 Gen1 T: USB_4 USB2.0 B: USB_3
USB 3.2 Gen1 B: USB3_TC_1
SD Card
M.2 W LAN
BIOS ROM
Mic In
SATA3_1
2
No. Description
1 2 x 260-pin DDR4 SO-DIMM Slots (DDR4_A1, DDR4_B1)
2 SATA3 Connector (SATA3_1)
3 CPU Fan Connector (CPU_FAN1)
English
Back Side View
M.2 SSD
English
6 7
1.4 Front Panel
FP6D4-P2
21 3
4 6
No. Description No. Description
1 SD Card Socket 4 USB 2.0 Port (USB_3)*
2 USB 3.2 Gen1 Type-C Port *Quick Charger Support
(USB3_TC_1) 5 USB 3.2 Gen1 Type-A Port (USB_2)
3 USB 3.2 Gen1 Type-A Port 6 USB 2.0 Port (USB_1)
(USB_ 4) 7 Power Button (S W1)
5
7
English
Loading...
+ 30 hidden pages