No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see ww w.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)
e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Unique Features 6
1.4 Motherboard Layout 9
1.5 I/O Panel 11
Chapter 2 Installation 12
2.1 Installing the CPU 13
2.2 Installing the CPU Fan and Heatsink 16
2.3 Installing Memory Modules (SO-DIMM) 17
2.4 Expansion Slots (PCI Express Slots) 19
2.5 Jumpers Setup 20
2.6 Onboard Headers and Connectors 21
Chapter 3 Software and Utilities Operation 26
3.1 Installing Drivers 26
3.2 A-Tuning 27
3.3 Intel® Smart Connect Technology 30
3.4 Intel® Remote Wake Technology 35
3.4.1 Conguring and Using MeshCentral 35
3.4.2 Conguring and Using Splashtop 40
3.5 Start8 43
Chapter 4 UEFI SETUP UTILITY 46
4.1 Introduction 46
4.1.1 UEFI Menu Bar 46
4.1.2 Navigation Keys 47
4.2 Main Screen 48
4.3 OC Tweaker Screen 49
4.4 Advanced Screen 57
4.4.1 CPU Conguration 58
4.4.2 Chipset Conguration 60
4.4.3 Storage Conguration 63
4.4.4 Intel® Smart Connect Technology 64
4.4.5 Super IO Conguration 65
4.4.6 ACPI Conguration 66
4.4.7 USB Conguration 68
4.5 Tools 69
4.6 Hardware Health Event Monitoring Screen 72
4.7 Boot Screen 73
4.8 Security Screen 76
4.9 Exit Screen 77
Chapter 1 Introduction
ank you for purchasing ASRock H81TM-ITX motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.
In this manual, Chapter 1 and 2 contains the introduction of the motherboard
and step-by-step installation guides. Chapter 3 contains the operation guide of the
soware and utilities. Chapter 4 contains the conguration guide of the BIOS setup.
Becau se the motherboard specications and the BIOS soware might be updated, the
content of this documentation will be subject to change without notice. In case any modications of this documentation occur, the updated version will be available on ASRock’s
website w ithout further notice. If you require technical support related to this motherboard, please visit our website for specic information about the model you are using. You
may nd the l atest VGA cards and CPU suppor t list on ASRock’s website a s well. ASRock
website http://www.asrock.com.
1.1 Package Contents
ASRock H81TM-ITX Motherboard (in Mini-ITX Form Factor)
•
ASRock H81TM-ITX Quick Installation Guide
•
ASRock H81TM-ITX Support CD
•
2 x Serial ATA (SATA) Data Cables (Optional)
•
1 x SATA 1 to 1 Power Cable (Opt ional)
•
2 x I/O Panel Shields
•
1 x WiFi Module Screw
•
H81TM-ITX
English
1.2 Specications
Platform
A-Style
CPU
Chipset
Memory
•
•
•
•
•
•
•
•
•
•
•
H81TM-ITX
in Mini-ITX Form Factor (Compatible with Mini-ITX)
ErP/EuP Ready (ErP/EuP ready power supply is required)
•
English
Due to limitation , the actual memory size may be less than 4GB for the re servation for system usage under Windows® 32-bit ope rating systems. Windows® 64-bit operating systems
do not have s uch limitation s. You can use ASRock XFast R AM to utilize the memory that
Windows® cannot use.
English
56
1.3 Unique Features
ASRock A-Tuning
A-Tuning is ASRock’s multi purpose soware suite with a new interface, more new
features and improved utilities, including XFast R AM, Dehumidier, Good Night
LED, FAN-Tastic Tuning, OC Tweaker and a whole lot more.
ASRock Instant Flash
ASRock Instant Flash is a BIOS ash utility embedded in Flash ROM. is conve-
nient BIOS update tool allows you to update the system BIOS in a few clicks without
preparing an additional oppy diskette or other complicated ash utility. Just save
the new BIOS le to your USB storage and launch this tool by pressing <F6> or
<F2> during POST to enter the BIOS setup menu to access ASRock Instant Flash.
Please be noted that the USB ash drive or hard drive must use FAT32/16/12 le
system.
ASRock APP Charger
Simply by installing the ASRock APP Charger makes your iPhone/iPad/iPod Touch
charge up to 40% faster than before on your computer. ASRock APP Charger allows
you to quickly charge many Apple devices simultaneously and even supports
continuous charging when your PC enters into Standby mode (S1), Suspend to RAM
(S3), hibernation mode (S4) or power o (S5).
H81TM-ITX
ASRock XFast LAN
ASRock XFast LAN provides faster internet access, which includes the benets
listed below. LAN Application Prioritization: You can congure your application’s
priority ideally and add new programs to the list. Lower Latency in Game: Aer
setting online game’s priority higher, it can lower the latency in games. Trac
Shaping: You can watch Youtube HD videos and download simultaneously. Real-
Time Analysis of Your Data: With the status window, you can easily recognize
which data streams you are currently transferring.
ASRock XFast RAM
ASRock XFast RAM is included in A-Tuning. It fully utilizes the memory space
that cannot be used under Windows® 32-bit operating systems. ASRock XFast RAM
shortens the loading time of previously visited websites, making web surng faster
than ever. And it also boosts the speed of Adobe Photoshop 5 times faster. Another
advantage of ASRock XFast RAM is that it reduces the frequency of accessing your
SSDs or HDDs in order to extend their lifespan.
English
ASRock Crashless BIOS
ASRock Crashless BIOS allows users to update their BIOS without fear of failing. If
power loss occurs during the BIOS updating process, ASRock Crashless BIOS will
that BIOS les need to be placed in the root director y of your USB disk. Only USB 2.0
ports support this feature.
ASRock OMG (Online Management Guard)
Administrators are able to establish an internet curfew or restrict internet access
at specied times via OMG. You may schedule the starting and ending hours of
internet access granted to other users. In order to prevent users from bypassing
OMG, guest accounts without permission to modify the system time are required.
ASRock Internet Flash
ASRock Internet Flash downloads and updates the latest UEFI rmware version
from our servers for you without entering Windows® OS. Please setup network
conguration before using Internet Flash.
ASRock UEFI Tech Service
Contact ASRock Tech Service by sending a support request from the UEFI setup
utility if you are having trouble with your PC.
ASRock Dehumidier Function
Users may prevent motherboard damages due to dampness by enabling
“Dehumidier Function”. When enabling Dehumidier Function, the computer
will power on automatically to dehumidify the system aer entering S4/S5 state.
ASRock Easy Driver Installer
For users that don’t have an optical disk drive to install the drivers from our support
CD, Easy Driver Installer is a handy tool in the UEFI that installs the LAN driver
to your system via an USB storage device, then downloads and installs the other
required drivers automatically.
ASRock Interactive UEFI
ASRock Interactive UEFI is a blend of system conguration tools, cool sound eects
English
and stunning visuals. e unprecedented UEFI provides a more attractive interface
and more amusment.
78
ASRock Fast Boot
With ASRock’s exclusive Fast Boot technology, it takes less than 1.5 seconds to
logon to Windows 8 from a cold boot. No more waiting! e speedy boot will
completely change your user experience and behavior.
ASRock Restart to UEFI
Windows® 8 brings the ultimate boot up experience. e lightning boot up speed
makes it hard to access the UEFI setup. ASRock Restart to UEFI allows users to
enter the UEFI automatically when turning on the PC. By enabling this function,
the PC will enter the UEFI directly aer you restart.
ASRock Good Night LED
ASRock Good Night LED technology oers you a better sleeping environment by
extinguishing the unessential LEDs. By enabling Good Night LED in the BIOS, the
Power/HDD LEDs will be switched o when the system is powered on. Good Night
LED will automatically switch o the Power and Keyboard LEDs when the system
enters into Standby/Hibernation mode as well.
ASRock USB Key
In a world where time is money, why waste precious time everyday typing
usernames to log in to Windows? Why should we even bother memorizing those
foot long passwords? Just plug in the USB Key and let your computer log in to
windows automatically!
H81TM-ITX
ASRock Home Cloud
is motherboard supports remote wake with the onboard Intel LAN, so you
can connect with your PC from anywhere in the world. You will be able to power
your PC on or turn it o, monitor and take control of it remotely with another
smartphone, tablet or computer.
ASRock FAN-Tastic Tuning
ASRock FAN-Tastic Tuning is included in A-Tuning. Congure up to ve dierent
fan speeds using the graph. e fans will automatically shi to the next speed level
when the assigned temperature is met.
English
1.4 Motherboard Layout
Intel
H81
PCIE1
MINI_PCI E1
CMOS
Battery
CHA_FAN1
USB4_5
1
SATA_POW1
LVDS 1
DDR3_B1
DDR3_A1
HDLED RESET
PLED PWRBTN
PANEL1
1
BKT_PWR1
1
PNL_PWR1
1
USB2_ 3
1
1
HDMI_SPDIF1
1
HD_AUDIO1
AUDIO
CODEC
LAN
SATA_1
CPU_FAN1
32Mb
BIOS
DMIC1
1
CLRCMOS1
1
1
Front
Speaker
Mic In
USB 2.0
T: USB0
B: USB1
RJ-45
USB 3.0
T: USB0
B: USB1
DC Jack
DVI1
HDM I1
CIR1
1
H81TM-ITX
Ro HS
1
HTPC1
BLT_VOL1
1
COM1
1
SPEAKER1
1
1
HD_AUDIO2
LPC1
1
SATA_0
PLED1
1
324 5 678
11
13
14
12
15
1718
19
20
21
22
24
23
US B 3. 0
16
10
9
English
910
No. Description
1Power LED Header (PLED1)
2SATA3 Connector (SATA_1)
3Chassis Fan Connector (CHA_FAN1)
4Consumer Infrared Module Header (CIR1)
5SATA3 Connector (SATA_0)
6USB 2.0 Header (USB4_5)
7SATA Power Connector (SATA_POW1)
8System Panel Header (PANEL1)
9Backlight Power Jumper (BKT_PWR1)
10 Panel Power Jumper (PNL _PWR1)
11 LVDS Connector (LVDS1)
12 2 x 204-pin DDR3 SO-DIMM Slots (DDR3_A1, DDR3_B1)
13 Backlight Control Header (BLT_VOL1)
14 COM Port Header (COM1)
15 USB 2.0 Header (USB2_3)
16 CPU Fan Connector (CPU_FAN1)
17 Digital MIC Header (DMIC1)
18 SPDIF Out Connector (HDMI_ SPDIF1)
19 Front Panel Audio Header (HD_AUDIO1)
20 Analog Surround Audio Header (HD_AUDIO2)
21 3W Audio AMP Output Wafer Header (SPEAKER1)
22 Home eater PC Header (HTPC1)
23 Clear CMOS Jumper (CLRCMOS1)
24 LPC Debug Header (LPC1)
H81TM-ITX
English
1.5 I/O Panel
87625431
No. DescriptionNo. Description
1DC Jack*5LAN RJ-45 Port**
2USB 3.0 Ports (USB3_01)6USB 2.0 Ports (USB01)
3DVI-I Port (DVI1)7Microphone (Pink)
4HDMI Port (HDMI1)8Front Speaker (Lime)
* Please use a 19V power adapter for the DC jack. is jack accepts dual barrel plugs with an inner diamete r of 5.1
mm and an outer diameter of 7.4 mm, where the inner contact is +19 (±10%) VDC and the shell is GND.
DELTA DELTA-ADP-150TB-150W/19V
HP HP-TBC-BA52-150W/19V
FSP FSP-FSP150-ABAN1-150W/19V
** ere are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
is is a in Mini-ITX form factor motherboard. Before you install the
motherboard, study the conguration of your chassis to ensure that the
motherboard ts into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
Make sure to unplug the power cord before installing or removing the motherboard.
•
Failure to do so may cause physical injuries to you and damages to motherboard
components.
In order to avoid damage from static electricity to the motherboard’s components,
•
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
Hold components by the edges and do not touch the ICs.
•
Whenever you uninstall any components, place them on a grounded anti-static pad or
•
in the bag that comes with the components.
When placing screws to secure the motherboard to the chassis, please do not over-
•
tighten the screws! Doing so may damage the motherboard.
H81TM-ITX
English
2.1 Installing the CPU
1. Before you insert the 1150-Pin CPU into the sock et, please check if the P nP cap is on the
socket, if the CPU surface is unclean, or if there are any bent pins in the sock et. Do not
force to in sert the CPU into the socket if above situation is found . Otherwise, the CPU
will be seriously damaged.
2. Unplug all power c ables before in stalling the CPU.
1
A
B
2
English
1314
H81TM-ITX
3
5
4
English
Please save and replace the cover if the processor i s removed. e cover must be placed if
you wish to return the motherboard for aer service.
English
1516
2.2 Installing the CPU Fan and Heatsink
12
H81TM-ITX
N
FA
_
U
P
C
English
2.3 Installing Memory Modules (SO-DIMM)
is motherboard provides two 204-pin DDR3 (Double Data Rate 3) SO-DIMM
slots.
It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot; otherwise,
this motherboard and SO-DIMM may be damaged.
e SO-DIMM only ts in one cor rect orientation. It w ill cause per manent damage to
the motherboard and the SO-DIMM if you force the SO-DIMM into the sl ot at incorrect
orientation.
English
1718
H81TM-ITX
1
2
English
2.4 Expansion Slots (PCI Express Slots)
ere is 1 PCI Express slot and 1 mini PCI Express slot on this motherboard.
Before installing an ex pansion card, please make sure that the power supply is switched o
or the power cord is unplug ged. Pl ease re ad the documentation of the expansion card and
make necessary hardware settings for the card before you start the installation.
PCIe slot:
PCIE1 (PCIe 2.0 x4 slot) is used for PCI Express x4 lane width cards.
mini-PCIe slot:
MINI_PCIE1 (mini-PCIe slot) is used for WiFi module.
English
1920
2.5 Jumpers Setup
e illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. e illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
Clear CMOS Jumper
(CLRCMO S1)
(see p.9, No. 23)
CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system
parameters to default setup, please turn o the computer and unplug the power
cord from the power supply. Aer waiting for 15 seconds, use a jumper cap to
short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear
the CMOS right aer you update the BIOS. If you need to clear the CMOS when
you just nish updating the BIOS, you must boot up the system rst, and then shut
it down before you do the clear-CMOS action. Please be noted that the password,
date, time, and user default prole will be cleared only if the CMOS battery is
removed.
Clear CMOSDefault
H81TM-ITX
Backlight Power Jumper
(3-pin BKT_PWR1)
(see p.9, No. 9)
Panel Power Jumper
(3-pin PNL_PWR1)
(see p.9, No. 10)
1-2 : +19V
2-3 : +12V
1-2 : +3V
2-3 : +5V
English
Loading...
+ 58 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.