Apricorn AFW6-4 Quick Start Guide

AFW6-4 Quick Start Guide

The Apricorn AFW6-4 FireWire Adapter kit enables you to connect and power
your Aegis FireWire drive (6pin) or any other 6-pin FireWire peripheral to an
unpowered 4 pin FireWire or iLink port.

INSTRUCTIONS (see diagram below)

1. Plug the FireWire 6pin - 4pin Adapter into the 4-pin port on your computer.

2. Insert the included AC Adapter into the FireWire Adapter as shown below.

3. Plug the AC Adapter into the power socket - the 6-pin port is now powered.

4. Your AFW6-4 FireWire Adapter is now ready to power your drive. Plug your
Aegis drive or other FireWire peripheral into the powered 6-pin FireWire port.

Note:

Please note that when the
AFW6-4 FireWire Adapter kit is
plugged into a power source,
the 6-pin FireWire port on the
kit is live.

Therefore any device left
attached to the 6 pin connector
will be receiving power as long
as it is plugged in, even if the
4-pin data port is not plugged
into the computer.

4-Pin

Package includes:
FireWire 6 pin - 4 pin Adapter
AC Adapter

3

2

4

1

Plug your Aegis
drive or other
FireWire peripheral
into the powered

6-Pin

6-pin FireWire port