APC AP7922B User Manual

Switched Rack PDU AP7922B

Overview

The APC by Schneider Electric Switched Rack Power Distribution Unit (PDU) distributes power
to devices in the rack. It has a sensor that measures the current used by the PDU and its
attached devices. It can be monitored through Web, Telnet, SNMP, SSH, or StruxureWare Data
Center Expert

Outlets: The outlets connect the Rack PDU to equipment in your rack or enclosure. Each outlet
allows independent control of the connected equipment and the Rack PDU firmware also
provides Outlet User accounts. Sixteen(16) IEC 320 C13 outlets.

Digital display: A digital display shows aggregate current being used per bank.
Power cord: The 12 ft (3.65 m) power cord terminates with a IEC 309 connector.

®

interfaces.

Specifications

Electrical

Nominal input voltage 230 V
Acceptable input voltage ± 10% Nominal input voltage
Maximum total current draw 32 A
Input frequency 47–63 Hz
Cord length 12 ft (144 in)
Input connectors IEC 309, 32A, 230V, 1~ plug
Output connectors Sixteen IEC 320 C13 outlets
Overload protection Two (2) 16 A

Physical

Size (H × W × D) 3.5×17.5×4.5 in (88.9×444.5×114.3 mm)
Weight 9.9 lb ( 4.49 kg)
Shipping weight 14.4 lb (6.53 kg)

Environmental

Elevation (above MSL)

Operating
Storage

Temperature

Operating
Storage

Humidity

Operating
Storage

Compliance

Safety VDE, CE, EAC
EMC EN 55022, AS/NZS, EN55024, CISPR22

0–15 000 ft (0–4500 m)
0–50 000 ft (0–15 000 m)

–5 to 45° C (23 to 115° F)
–25 to 65° C (–13 to 149° F)

5–95% RH, Non-condensing
5–95% RH, Non-condensing

Customer support and warranty information are available on the website, www.apc.com.
© 2016 APC by Schneider Electric. All rights reserved.

990-5832-001

9/2016