Hot Water Supply Systems
HOT WATER SUPPLY SYSTEMS
The “TOTAL SYSTEM” Concept - We have taken our highly efficient equipment and created a convenient package; a complete domestic hot water system.
Features
Simplifies Installation
§The installer simply connects the flue, gas, electric supply, cold water make-up, and hot water supply (Building return loops connect to cold water make-up.)
Eliminates Costly Field Errors
§These complete hot water systems are factoryengineered and assembled to assure proper pipe, pump and wiring sizing
§Systems are pre-piped and wired to guarantee maximum system efficiency
FactorY Tested
§Each Ac-U-Temp system is hydrostatic and fire tested before shipping from the factory
Ac-U-Temp Storage Tanks
§Each Ac-U-Temp storage tank is especially designed with tank opening locations that provide maximum tank draw efficiency and eliminate any unnecessary piping
and connections
§Standard Ac-U-Temp tanks are factory jacketed and insulated (Bare tanks to be insulated by others are also available.)
§The Ac-U-Tanks are factory standard with the same superior glass lining that has set new standards for the tank industry
§Standard tank capacities range from 80 gallons to 1,000 gallons (Custom tanks to 10,000 gallons are available)
OTHER Features
ASME Temperatures and Pressure
Relief ValVE 125#
§Tank Temperature Sensor
§Tank Thermometer
§Isolation Valves (Reliable Ball Valves)
§Superior I-Beam Skid
§125 psi Tank Construction
§Factory sized and supplied pump
OPTIONS
§Sequencingsystems) Control Panel (For Multi-Unit
§150 and 160 psi Tank Construction
§11” x 15” Manholes
§Cement and Epoxy Tanks Linings
CUSTOM Ac-U-Temp Systems
§All Ac-U-Temp Systems are built-to-order, and can be precisely designed to specifically meet your specifications
§Many combinations of heaters and tanks are available. Consult your local A. O. Smith Representative for factory assistance.
Multi-Unit Systems
§High recovery systems that can meet any hot water demand
§Systems can be designed to provide 50 to 100% back-up
§Heaters can be on & off fired, or sequenced to meet changing system demands
§Sequenced multi-unit systems that employ relatively small storage tanks are ideal for applications with constant, yet fluctuating hot water demands
Multi-Tank Systems
§For applications with low ceiling heights or unique installation challenges
Optional Dual Energy
Source Capability
§Ac-U-Temp storage tanks can be specified with heat exchangers; allows winter/summer heating operation
§Both, water-to-water, or steam-to-water heat exchangers are available in both single wall and double wall
§Complete control packages can be factory installed for hook-up and run capability
§Electric Back-up - Heavy-duty electric water heater elements and controls can be specified for up to 3,000 KW; 100% electric back-up
§Providescurtailmentshot water even during natural gas
LIMITED WARRANTY OUTLINE
§If the heat exchanger modules should fail within 5 years, under the terms of the warranty,
A.O. Smith will furnish a replacement part; installation, labor, handling and local delivery extra. If the tank should leak any time during the first 5 years, under terms of the warranty,
A.O. Smith will repair or replace the tank; installation, labor , handling and local delivery extra. THIS OUTLINE IS NOT THE WARRANTY.
For complete information, consult the written warranties or A. O. Smith.
A. O. Smith Corporation • 500 Tennessee Waltz Parkway • Ashland City, TN 37015 • 800-527-1953 Toll-free USA
www.hotwater.com
MODELS HWT-300 thru HWT-670
Page 1 of 4
Revised July 2014 AOSCG25650
Hot Water Supply Systems
CONFIGURATION V
CONFIGURATION H
A. O. Smith Corporation • 500 Tennessee Waltz Parkway • Ashland City, TN 37015 • 800-527-1953 Toll-free USA |
Page 2 of 4 |
www.hotwater.com |
AOSCG25650 |