The APA4558 consists of two independent , high gain
, internally frequency compensated operational amplifiers which were designed specifically to operate
from a single power supply up to 20 volts . Operation from dual power supplies is also possible and
the power supply current drain is essentially independent of the magnitude of the power supply voltage .
Application areas include transducer amplifiers , DC
gain blocks and all the conventional OP amplifier
circuits which can be more easily implemented in
single power supply systems . ( For example , the
APA4558 can be directly operated from the standard
+5V power supply voltage which is normally used in
digital systems . )
Ordering Information
)2) "##&
Handling Code
Temp. Range
Package Code
Package Code
J : P D IP K : SO P-8
O : TSSOP-8
Temp. Range
C : 0 to 7 0 C
Handling Code
TU : Tu be
TR : Tape & Reel
°
Block Diagram
Output A
Inverting Input A
Non-inverting Input A
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Supply Voltage20V
Differential Input Voltage20V
Input Voltage-0.3V to +20VV
Power Dissipation500mW
Operating Free-air Temperature Range0 to 70
Storage Temperature Range-40 to +150