ANALOG DEVICES AD6652 Service Manual

Features
Integrated 12-bit dual channel ADC
Sample rates up to 65 MSPS
IF sampling frequencies to 100 MHz
SNR = 70 dB (to Nyquist), SFDR = 85 dB (to Nyquist)
Power-down to <2 mW
Internal voltage reference
Internal sample-and-hold analog input
Differential or single-ended analog input
Clock duty cycle stabilizer
–80 dB channel crosstalk @ f
IN
=10MHz
Quad channel receive signal processor (RSP)
Four independent receivers in a single package
Crossbar switched receive processor inputs
Digital resampling for noninteger decimation rates
Programmable decimating FIR filters
Flexible control for multicarrier and phased array
196-lead BGA package
Member of the VersaCOMM+
®
family. Visit
www.analog.com/VersaCOMM for more information.
Applications
Communications
Diversity radio systems
Multimode digital receivers: GSM, PHS,
AMPS, UMTS, WCDMA, CDMA-ONE, IS95, IS136, CDMA2000, EDGE, IMT-2000
Smart antenna systems
General-purpose software radios
Broadband data applications
Instrumentation and test equipment
Micro and pico cell systems
Wireless local loop
In-building wireless telephony
AD6652 IF to Baseband Diversity Receiver
© 2003 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective companies. Printed in the U.S.A. H03605-.5-3/03(0)
Worldwide Headquarters
One Technology Way P. O. Box 9106 Norwood, MA 02062-9106 U.S.A. Tel: 781.329.4700, (1.800.262.5643, U.S.A. only) Fax: 781.326.8703
Analog Devices, Inc. Europe
c/o Analog Devices SA 17 –19,rue Georges Besse Parc de Haute Technologie d’Antony F-92182 Antony Cedex, France Tel: 33.1.46.74.45.00 Fax: 33.1.46.74.45.01
Analog Devices, Inc. Japan Headquarters
New Pier Takeshiba South Tower Building 1-16-1 Kaigan, Minato-ku, Tokyo 105-6891, Japan Tel: 813.5402.8210 Fax: 813.5402.1063
Analog Devices, Inc. Southeast Asia Headquarters
4501 Nat West Tower Times Square 1 Matheson Street Causeway Bay Hong Kong, PRC Tel: 852.2.506.9336 Fax: 852.2.506.4755
ADC/RSP Integration Advantages
Embedded high performance IF sampling ADCs
Uses proven product cores
Cuts development time and is cost competitive
Reduces board layout space and complexity
Reduces component count and interconnect
parasitic oscillations
Enhanced testability and reliability
RSP channels provide signal processing gain
Embedded digital AGC in the RSP back end
3 V ADC cores and 2.5 V digital cores
High Performance Capabilities for Digital Up/Down Conversion
AD6652
High speed NCO frequency translation
Decimating filters
AGC support
Noninteger data rate resampling
Synchronized operations (hop, ramp, mode)
Programmable filter response
JTAG, BIST, PN generation
Phase equalization
Digital modulation (GMSK, QPSK, 8PSK)
Interpolating filters
On-chip ADC
On-chip DAC
2
2
ADI SoftCell® Software Defined Radio (SDR)
A Common Hardware Platform for GSM, EDGE, WCDMA, cdma2000, TD-SCDMA
CIC RESPONSE
COMPOSITE RESPONSE DESIRED RESPONSE
WIDEBAND
RF
FRONT END
RF FRONT END DESIGNED FOR MULTIPLE BANDS
ADC
ROADMAP
CLOCK DISTRIBUTION
DAC
ROADMAP
WIDEBAND INPUT SPECTRUM
SIGNAL OF INTEREST “IMAGE”
–fS/2 –3fS/8 –5fS/16 –fS/4 –3fS/16 –fS/8 –fS/16 fS/16 fS/8 fS/
AFTER FREQUENCY TRANSLATION
–f
/2 –3fS/8 –5fS/16 –fS/4 –3fS/16 –fS/8 –fS/16 fS/16 fS/8 fS/
S
FREQUENCY TRANSLATION (e.g., SINGLE 1 MHz CHANNEL TUNED TO BASEBAND)
RSP
ROADMAP
TSP
ROADMAP
WIDEBAND INPUT SPECTRUM (e.g., 30MHz FROM HIGH SPEED ADC)
TigerSHARC
DSP ROADMAP
(–f
SAMPLE
dc
NCO “TUNES” SIGNAL TO BASEBAND
dc
®
UMTS FDD CDMA 2000 TD-SCDMA CSM/GPRS
EDGE WLAN
/2 TO +f
SAMPLE
SIGNAL OF INTEREST
/2)
/16
5f
fS/43fS/16 3fS/8
S
5f
/16
fS/43fS/16 3fS/8
S
Loading...