American Standard 6065.111, 6066.111, 6065.521, 6065.121, 6066.121 Installation Manual

Installation Instructions

	SELECTRONIC	®
			6065.111	6066.111	6065.521
			MODEL NUMBERS
	DC POWERED PROXIMITY EXPOSED		6065.121	6066.121	6065.525
	TOILET FLUSH VALVE
			6065.161	6066.161	6065.561
	1.1, 1.28, 1.6, 1.6/1.1 & 1.28/1.1 GPF
			6065.721	6066.721	6065.565
			6065.761	6066.761

Exposed Flushometer for 1-1/2" Top Spud Bowls

CLOG RESISTANT

• Self-cleaning piston valve prevents clogging and reduces maintenance.

ONE SENSOR FITS ALL

•Only 1 sensor for entire Selectronic™ line of faucets, urinals, and flush valves.

•Range can be adjusted manually or with optional remote control.

•Sensor Features Low Battery Indicator.

CAUTION: Use only American Standard supplied transformers and cable sets. Using non-AS supplied cables, or cutting, splicing or modifying any components will void the warranty.

Certified to comply with ASME A112.19.2

© 2015 AS America, Inc.

NOTE TO INSTALLER: Please give this manual to the customer after installation.

To learn more about American Standard Selectronic® Products visit our website at: www.americanstandard-us.com or e-mail us at: [e-mail]

For Parts, Service, Warranty or other Assistance,

please call (844) CRT-TEAM / [phone] (In Canada: 1-800-387-0369)

(In Toronto Area only: 1-905-306-1093))

© 2015 AS America Inc.

1

M965646 REV. 1.4 (7/15)

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

UNPACKING	All American Standard Products Are Water Tested At Our Factory.
	Some Residual Water May Remain In The Valve During Shipping.

Remove the Flush Valve items from the carton. The illustration below shows all items after they have been removed from the carton. Some items may be packaged partially assembled to other items.

1. Installation Instructions		6. Wall Escutcheon
2.	Flush Valve Body Assembly	7. Cover Tube
3. Vacuum Breaker Tube		8.	Sweat Adapter
4. Spud Coupling Nut and Washers		9.	Stop Valve
5.	Spud Flange

CARE INSTRUCTIONS:

DO: CLEAN THE PRODUCT WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

2

3

4

5

DO NOT REMOVE PROTECTIVE FILM FROM SENSOR EYE UNTIL INSTALLATION IS COMPLETE.

7

	6	8
		9

	Instructions	SELECTRONIC®	MODEL NUMBERS
		DC POWERED PROXIMITY EXPOSED	6065.111	6066.111	6065.521
		TOILET FLUSH VALVE	6065.121	6066.121	6065.525
		1.1, 1.28, 1.6,	6065.161	6066.161	6065.561
		1.6 / 1.1, & 1.28/1.1 GPF
			6065.721	6066.721	6065.565
	Installation		6065.761	6066.761
1		Exposed Flushometer
		for 1-1/2" Top Spud Bowls
		CLOG RESISTANT
		• Self-cleaning piston valve prevents clogging and reduces maintenance.
		ONE SENSOR FITS ALL
		• Only 1 sensor for entire Selectronic™ line of faucets, urinals, and flush valves.
		• Range can be adjusted manually or with optional remote control.
		• Sensor Features Low Battery Indicator.
		CAUTION: Use only American Standard
		supplied cable sets. Using non-AS supplied
		cables, or cutting, splicing or modifying any
		components will void the warranty.
		Certified to comply with ASME A112.19.2
		© 2015 AS America, Inc.
	NOTE TO INSTALLER: Please give this manual to the customer after installation.
	To learn more about American Standard Selectronic® Products visit our website at:www.americanstandard-us.com
	or e-mail us at: [e-mail]
	For Parts, Service, Warranty or other Assistance,
	please call (844) CRT-TEAM / [phone] (In Canada: 1-800-387-0369)
		(In Toronto Area only: 1-905-306-1093)

2	M965646 REV. 1.4 (7/15)

Roughing-in Dimensions Fig. 1				GENERAL DESCRIPTION:
Right or Left Hand Installation				SELECTRONIC® PROXIMITY TOILET FLUSH VALVE
See (Section 5) for converting Flush				Exposed Flushometer for 1-1/2” Top Spud Fixtures
Valve to Left Hand Installation.				Exclusive, self cleaning piston-type flush valve with
				proximity operation and manual override. Operates
				on DC (battery) power. Recommended operating
				pressure 35 to 80 psi. Can install left or right-handed.
				Detection Zone can also be adjusted manually, or
			FINISHED WALL	with optional remote control.
	73 mm
	(2-7/8")	305 mm MÁX.
		(12" MÁX.)
	120 mm			15˚
MANUAL	(4-3/4")
OVERRIDE
BUTTON
				DETECTION ZONE
		SUPPLY		400mm-800mm
		(1" NPT.)		(15-3/4 TO 31-1/2)
		(NPT de 1")
	-C-L-	412 mm
292 mm		(16-3/16")
		108mm-134mm
(11-1/2")
	*-C-L-	(4-1/4" TO 5-1/4")
	152mm MIN.		170 mm MÁX.
	(6") MIN.	FOR 1-1/2" TOP
			(6-11/16") MÁX.
		SPUD FIXTURES
				CAUTION: Use only American Standard supplied
				transformers and cable sets. Using non-AS supplied
*Note: The Critical Line (-C-L-) on Vacuum				cables, or cutting, splicing or modifying any components
Breaker must typically be 6" (152mm) above				will void the warranty.
fixture. Consult Codes for details.

RECOMMENDED TOOLS; Fig. 2.

1. Teflon Tape

2.Flat Blade Screwdriver

3.Adjustable Wrench

4.Tape Measure

5.Hacksaw

6.Tubing Cutter

7.File

8.For Sweat Connection; Solder and Torch

9.2.5mm Hex Wrench

10.1.5mm Hex Wrench

Fig. 2
1	2			3
		4
			10'
				6
	5			8
	7		9	10

PRIOR TO INSTALLATION

	Note: Prior to installing the Selectronic™Flush		• Flush all water lines prior to operation (See Step 4).
	Valve the following items must be installed.		Dirt and debris can cause flush valve to run continuously.
	1. Toilet		• With the exception of Stop Valve Inlet, DO NOT
	2.	Drain line
			use pipe sealant or plumbing grease on any
	3.	Water supply line
			valve component or coupling!

	IMPORTANT:	• Protect the chrome or special finish on the Flushometer.
	• All plumbing and electrical wiring should be
		DO NOT USE toothed tools on finished surfaces to install
	installed in accordance with applicable codes
		or service these valves. Also see “Care and Cleaning”
	and regulations.
		section of this manual.
	• The use of water hammer arrestors is strongly
	recommended for commercial applications. All piping	• This product contains mechanical and/or electrical
	behind the walls should be properly secured and	components that are subject to normal wear. These
	fastened.
		components should be checked on a regular basis and
	• Water supply lines must be sized to provide an
		replaced as needed to maintain the valve’s performance.
	adequate volume of water for each fixture.

3	M965646 REV. 1.4 (7/15)