amada 367 Drawing

Pega 367 with 04PC Control Layout Drawings ©Amada America, Inc.

Pega 367 with 04PC Control Layout Drawings

Amada America I nc.

7025 Firestone Blvd.
Buena Park CA. 90621
Phone: [phone]

Fax: [phone]

Email [e-mail]

Print Date 03/12/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http://www.amada.com Page 1 of 9

Pega 367 with 04PC Control Layout Drawings ©Amada America, Inc.

Warning

Qualified personnel must complete all work.

!

! Do not apply power to the Pega 367 until an A.E.S.I. (Amada Engineering and

Service Incorporated) Engineer is present and has instructed you to do so.

! Not all information required for proper installation, of the Pega 367 is included with

this document. Specific details for proper installation are found in the document
Pega 367 with 04PC User Pre-installation Guide available at the Amada America
Internet web site at http://www.amada.com.

! Considerable effort has been made to ensure that this manual is free of

inaccuracies and omissions. However, as we are constantly improving our
product, some of the data contained herein may be out of date. Please check our
Internet site, http://www.amada.com, for the latest release of this document.

Print Date 03/12/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http://www.amada.com Page 2 of 9

Pega 367 with 04PC Control Layout Drawings ©Amada America, Inc.

Table Of Contents

Planning the Location of the Machine..............................................................................................................................................4

Plan View - Pega 367.......................................................................................................................................................................5

Plan View - Pega 367 with V367hs Conveyor..................................................................................................................................6

Plan View - Pega 367 with V367hs Conveyor and MP1530 Loader ................................................................................................7

End View - Pega 367 .......................................................................................................................................................................8

Elevation View - Pega 367...............................................................................................................................................................9

Print Date 03/12/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http://www.amada.com Page 3 of 9