Page 1
Type II Vipros 358 King With Fanuc 18P Control Layout Drawings ©Amada America Inc.
Type II Vipros 358 King with Fanuc 18P Control
Layout Drawings
Amada America I nc.
7025 Firestone Blvd.
Buena Park CA. 90621
Phone: (714) 739 2111
Fax.: (714) 739 4099
Email info@amada.com
Print Date 02/16/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http:// www.amada.com/support Page 1 of 10
Page 2
Type II Vipros 358 King With Fanuc 18P Control Layout Drawings ©Amada America Inc.
Warning
! Qualified personnel must complete all work.
! Do not apply power to the Type II Vipros 358 King until an A.E.S.I. (Amada Engineering and Service
Incorporated) Engineer is present and has instructed you to do so.
! Not all information required to install the Type II Vipros 358 King is included with this document. Specific details
for proper installation are found in the document Type II Vipros 358 King with Fanuc 18P User Pre-installation
Guide available at the Amada America Internet web site at http://www.amada.com/.
! Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However,
as we are constantly improving our product, some of the data contained herein may be out of date. Please
check our Internet site, http://www.amada.com/, for the latest release of this document.
Print Date 02/16/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http:// www.amada.com/support Page 2 of 10
Page 3
Type II Vipros 358 King With Fanuc 18P Control Layout Drawings ©Amada America Inc.
Contents
Planning the Location of the Type II Vipros 358 King......................................................................................................................4
Plan View - Type II Vipros 358 King............................................................................................................................................5
Plan View - Type II Vipros 358 King (shown with optional standard conveyors)..........................................................................6
Plan View - Type II Vipros 358 King (shown with optional standard conveyors and MP1225 Loader)........................................7
End View - Type II Vipros 358 King.............................................................................................................................................8
Elevation View - Type II Vipros 358 King.....................................................................................................................................9
Chiller Placement.......................................................................................................................................................................10
Print Date 02/16/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http:// www.amada.com/support Page 3 of 10
Page 4
Type II Vipros 358 King With Fanuc 18P Control Layout Drawings ©Amada America Inc.
Planning the Location of the Typ e II Vipros 358 King
The following diagrams provide the details for positioning the Type II Vipros 358 King.
" No obstacles are allowed in the worksheet travel area and the ceiling must be at least 40" above the Type II Vipros 358 King.
" All of the recommended maintenance areas should be used, but at a minimum the doors of the NC unit must be able to be
opened. Any reduction of the listed maintenance areas may increase time and expense of installation and maintenance.
" The Type II Vipros 358 King machine and control must be protected from direct sunlight or other heat sources. Direct
exposure to direct heating sources such as infrared heaters have been shown to affect punch and die alignment.
" The positioning of the SBC EX5.5 Chiller is very flexible.
Print Date 02/16/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http:// www.amada.com/support Page 4 of 10
Page 5
Type II Vipros 358 King With Fanuc 18P Control Layout Drawings ©Amada America Inc.
c
Unit
8
C
Chiller
Unit
Unit
358
h
ge
g
g
6
0"
5
0
3
l
s
Plan View - Type II Vipros 358 King
Electrical Requirements
Vipros 358 King Type II
E1
230 / 460 / 3 / 60 ±10% 28 kVA
70 amps @ 230 / 3 / 60 VAC
35 amps @ 460 / 3 / 60 VAC
SBC EX5.5 Chiller
E2
230 or 460 / 3 / 60 ±10% 15 kVA
19 amps @ 460 / 3 / 60 VAC
37 amps @ 230 / 3 / 60 VAC
Compressed Air Requirements
Vipros 358 King Type II
A1
Operator Control Station
80 psi @ 8.8 ft³/min.
57.0"
hillerChiller
Unit
"
4"
"
.
7.
e
Ran
0.0" Workin
E2
"
.
"
Track 200 Centerline
Hydrauli
59.0"4
19"
Vipros 358 King
Optional Material
Supports Required
Optional Material
Supports Required
"
339" Recommended Safety / Maintenance Area 40" from all components
.2
A1
CNC
E1
12"12"12"
scale
162.11" = V
14.96" maximum travel area 157.48" materia
396.2" Recommended Safety / Maintenance Area 40" from all component
78.74" = Working Ran
k Machine Widt
Print Date 02/16/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http:// www.amada.com/support Page 5 of 10
Page 6
Type II Vipros 358 King With Fanuc 18P Control Layout Drawings ©Amada America Inc.
Chiller
c
er
Unit
C
Chiller
Unit
Unit
358
h
ge
g
g
0"
5
0
3
l
y
s
Plan View - Type II Vipros 358 King
Electrical Requirements
Vipros 358 King Type II
E1
230 / 460 / 3 / 60 ±10% 28 kVA
70 amps @ 230 / 3 / 60 VAC
35 amps @ 460 / 3 / 60 VAC
SBC EX5.5 Chiller
E2
230 or 460 / 3 / 60 ±10% 15 kVA
19 amps @ 460 / 3 / 60 VAC
37 amps @ 230 / 3 / 60 VAC
V358 Standard Conveyor 1
E3
208 - 230 / 460 / 3 / 60 ±10% .8 kVA
2.1 amps @ 208 / 3/ 60 VAC
2.0 amps @ 230 / 3 / 60 VAC
1.0 amps @ 460 / 3 / 60 VAC
V358 Standard Conveyor 2
E4
208 - 230 / 460 / 3 / 60 ±10% .8 kVA
2.1 amps @ 208 / 3/ 60 VAC
2.0 amps @ 230 / 3 / 60 VAC
1.0 amps @ 460 / 3 / 60 VAC
Compressed Air Requirements
Vipros 358 King Type II
A1
Operator Control Station
80 psi @ 8.8 ft³/min.
4"
98.8"
/ Maintenance Area 40" from all components
336" Recomended Safet
e
Ran
0.0" Workin
Unit
"
7.
Optional Material
Supports Required
(shown with optional standard conveyors)
57.0"
hillerChiller
4
E2
Track 200 Centerline
"
.
"
Hydrauli
Pow
59.0"
19"
E3
Conveyor 1
Conveyor 2
Optional Material
Supports Required
106.26"
A1
E1
162.11" = V
14.96" maximum travel area 157.48" materia
395.0" Recomended Safety / Maintenance Area 40" from all component
CNC
78.74" = Working Ran
k Machine Widt
E4
12"12"12"
scale
Print Date 02/16/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http:// www.amada.com/support Page 6 of 10
Page 7
Type II Vipros 358 King With Fanuc 18P Control Layout Drawings ©Amada America Inc.
Chiller
er
Unit
8
C
Chiller
Unit
Unit
162.11" = V358k Machine Width
ge
g
g
6
0"
5
0
3
l
y
"
L
d
L
g
h
141.7" Loader width
e
r
304.86"
h
scale
Plan View - Type II Vipros 358 King
Electrical Requirements
Vipros 358 King Type II
E1
230 / 460 / 3 / 60 ±10% 28 kVA
70 amps @ 230 / 3 / 60 VAC
35 amps @ 460 / 3 / 60 VAC
E2
SBC EX5.5 Chiller
230 or 460 / 3 / 60 ±10% 15 kVA
19 amps @ 460 / 3 / 60 VAC
37 amps @ 230 / 3 / 60 VAC
V358 Standard Conveyor 1
E3
208 - 230 / 460 / 3 / 60 ±10% .8 kVA
2.1 amps @ 208 / 3/ 60 VAC
2.0 amps @ 230 / 3 / 60 VAC
1.0 amps @ 460 / 3 / 60 VAC
V358 Standard Conveyor 2
E4
208 - 230 / 460 / 3 / 60 ±10% .8 kVA
2.1 amps @ 208 / 3/ 60 VAC
2.0 amps @ 230 / 3 / 60 VAC
1.0 amps @ 460 / 3 / 60 VAC
MP1225 Loader
E5
200 / 3 / 60 ±10%, 10 Kva
To operate at 230 / 460 VAC a step up
transformer is required with the following
service is required
29 amps @ 200 / 3 / 60 VAC
26 amps @ 230 / 3 / 60 VAC
13 amps @ 460 / 3 / 60 VAC
Compressed Air Requirements
Vipros 358 King Type II
A1
MP1225 Loader
A2
Operator Control Station
80 psi @ 8.8 ft³/min.
75 psi @ 31.8 ft³/min.
"
4"
"
.
e
Ran
/ Maintenance Area 40" from all components
" Recomended Safet
0.0" Workin
"
.2
7.
Optional Material
Supports Required
Unit
57.0"
hillerChiller
(shown with optional standard conveyors and MP1225 Loader)
4
E2
Track 200 Centerline
"
.
"
Hydraulic
Pow
59.0"
19"
Conveyor 1
Xformer
E5
MP1225
A2
116.5"
Optional Material
Supports Required
E3
Conveyor 2
t
en
er
oa
89.6
MP1225 Loader
A1
CNC
E4
forktruck access required
this area for material / parts
loading / unloading
E1
78.74" = Working Ran
14.96" maximum travel area 157.48" materia
461" Recomended Safety / Maintenance Area 40" from all components
81.9" to edge of Loade
combined machine widt
"
Print Date 02/16/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http:// www.amada.com/support Page 7 of 10
Page 8
Type II Vipros 358 King With Fanuc 18P Control Layout Drawings ©Amada America Inc.
End View - Type II Vipros 358 King
Material Pass Line
39.56"*
3.71"
14.76"
29.52"
53.92" Weight
Support Bolt
107.8" Weight Support Bolts
131.9" Shipping Width w/o Crate
78.74" X-axis zero set
162.2" Assembled Width
*Material Pass Line may increase with installation of available options
35.43"
J-Bolt Centerline
12"
12"12"
Scale
93.30"
Print Date 02/16/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http:// www.amada.com/support Page 8 of 10
Page 9
Type II Vipros 358 King With Fanuc 18P Control Layout Drawings ©Amada America Inc.
Elevation View - Type II Vipros 358 King
203.54"
52.76"
Throat Depth
Turret Center
19.69"
179.13"
Center of Track 200
50.000"
Working Range
Y-axis "0"
47.24"
19.69"
1.63"
Material Pass Line
39.56"*
62.40"
*Material Pass Line may increase with installation of available options
23.43"
37.40"
9.8"
10.3"
63.77" Weight
Support Centerline
103.15" J-Bolt Centerline
37.99"
26" ±10"
Hydraulic
Power
Unit
29.53"
Print Date 02/16/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http:// www.amada.com/support Page 9 of 10
Page 10
Type II Vipros 358 King With Fanuc 18P Control Layout Drawings ©Amada America Inc.
Chiller Placement
Y-Axis 0" Material Pass Line
6"
Hydraulic
Power
Unit
Chiller Unit
Two 15ft supplied water lines
Air Flow
Under normal operating conditions the Chiller may be placed against walls as shown.
For maintenance purposes access to all sides may be required.
60" overhead clearence required.
Chiller may be located up to 50ft from Hydraulic Unit.
Chiller is not designed for outdoor placement.
Print Date 02/16/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http:// www.amada.com/support Page 10 of 10
6"
Loading...