Alpine Electronics ILX-700 Owner's Manual
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN
R
AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/
/
ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ
DO UŻYCIA TYLKO W SAMOCHODZIE
ТОЛЬКО
iLX-70 0
R
EN
• OWNER’S MANUAL
Please read before using this equipment.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung
bitte vor Gebrauch des Gerätes.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
ALPINE ELECTRONICS MARKETING, INC.
1-7, Yukigaya-Otsukamachi, Ota-ku,
Tokyo 145-0067, JAPAN
Phone: 03-5499-4531
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa
igenom denna användarhandledning.
• GEBRUIKERSHANDLEIDING
Lees deze aanwijzingen aandachtig alvorens
dit toestel te gebruiken.
• РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
Прочтите настоящее руководство перед
началом использования оборудования.
• INSTRUKCJA OBSŁUGI
Prosimy zapoznać się z tą instrukcją przed
przystąpieniem do użytkowania urządzenia.
Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
ALPINE ELECTRONICS GmbH
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Fletchamstead Highway, Coventry CV4 9TW, U.K.
ALPINE ELECTRONICS FRANCE S.A.R.L.
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Alpine House
www.alpine.co.uk
(RCS PONTOISE B 338 101 280)
Cedex, France
Phone +33-(0)1-48638989
ALPINE ITALIA S.p.A.
Viale Cristoforo Colombo, 8
20090 Trezzano sul Naviglio MI, Italy
Phone +39 02 484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
Designed by ALPINE Japan
68-24567Z82-A
ENGLISH
Contents
Operating
Instructions
WARNING
WARNING ................................................. 5
CAUTION .................................................. 5
NOTICE ..................................................... 6
CAUTION .................................................. 6
Features
About Apple CarPlay ....................................... 7
About Home Screen ......................................... 7
Getting Started
Accessory List .................................................. 8
Location of Controls ........................................ 8
Touch Operation ............................................... 8
Turning Power On or Off ................................. 8
Turning the System On ..................................... 9
Adjusting the Volume ....................................... 9
Muting Quickly ................................................ 9
Operating an Item in a List ............................... 9
Using Siri ......................................................... 9
About Hands-Free Phone ................................. 9
Parking Assist Interrupt Function .................. 10
Access to Climate Mode ................................ 10
Applying TuneIt ............................................. 10
Adjusting the sound via the iPhone ............ 10
Radio
Listening to the Radio .................................... 11
Presetting Stations Manually .......................... 11
Presetting Stations Automatically .................. 11
Tuning to Preset Stations ................................ 11
RDS
Turning AF (Alternative Frequencies)
On or Off ..................................................... 12
Receiving Traffic Information ........................ 12
Receiving Traffic Information Manually ........13
PTY (Programme Type) Tuning .....................13
Priority News ..................................................13
Displaying Radio Text ....................................13
Apple CarPlay (Optional)
Access to Apple CarPlay ................................13
Auxiliary Device (Optional)
Operating Auxiliary Devices (Optional) .........14
Operating the Mobile Digital TV Receiver
(DVB-T) ......................................................14
Changing to the Mobile Digital TV Receiver
(DVB-T) Mode .........................................14
About the DVB-T operation screen .............15
Camera Operation (Optional)
Rear Camera Operation ..................................15
Displaying the rear view video while the car is
in reverse ..................................................15
Display the Rear View Video Manually ......15
Guide Display On/Off Setting .....................16
Adjusting the Caution Display Location .....16
Calling the Adjusted Values of the
Camera .....................................................16
About the Rear Camera Guide ........................16
Other Camera Operation .................................18
About the Adjustment of the Caution Display
Location ...................................................18
About the Adjusted Value of Image
Quality ......................................................18
Setup
Audio Setup
Audio Setup Operation ...................................18
Adjusting Balance (Between Left and
Right) ...........................................................19
Adjusting Fader (Between Front and Rear) .... 19
Setting the Bass Level .....................................19
Setting the Treble Level ..................................19
Setting the Subwoofer .....................................19
Turning Subwoofer ON/OFF .......................19
Adjusting the Subwoofer Level ...................19
Setting the Subwoofer Phase .......................19
Setting the Bass Engine SQ ............................19
Turning the Bass Engine SQ ON/OFF ........19
3-EN
Setting the Bass Engine SQ Type ................ 20
Adjusting the Bass Engine SQ Level .......... 20
Setting the Volume for Each Application ....... 20
Setting the MX (Media Xpander) ...................20
Equalizer Presets (EQ Presets) .......................20
Setting Defeat ................................................. 20
Display Setup
Display Setup Operation .................................21
Switching Display Modes ...........................21
Adjusting Brightness ................................... 21
Adjusting Color of Picture .......................... 21
Adjusting Image Contrast ...........................21
Adjusting Picture Quality ............................ 22
Saving and Calling the Adjusted Picture
Quality .....................................................22
General Setup
General Setup Operation ................................ 22
Time Setting ....................................................23
Setting the Clock Display ............................23
Setting the Time .......................................... 23
Language Setting ............................................23
Setting the Menu Language ........................ 23
Text Scroll Setting .......................................... 23
Setting the Scroll .........................................23
Key Sound Setting ..........................................23
Touch Sound Feedback On/Off setting ....... 23
Adjusting the Operating Sound ...................23
Setting Mute when Reversing .........................23
Screen/Lighting Setting .................................. 23
Setting the Brightness of the
Backlighting .............................................23
Button Backlighting Adjustment .................24
Display Backlighting Adjustment ............... 24
Changing the Opening Image ......................24
Security Code Setting .....................................24
Setting Security code ...................................24
Vehicle function Setting .................................. 25
Setting the Climate screen interrupt time .... 25
Setting the Parking sensor interrupt time .... 25
Setting the Vehicle type ...............................25
About iLX-700 ...............................................25
Displaying the Product Information ............ 25
Initializing the System .................................25
Demonstration Setup ...................................... 25
Canceling the Demonstration ......................25
Application Setup
Application Setup Operation ..........................26
Camera Setting ...............................................26
Setting the Camera Input .............................26
Setting the Camera Signal Input ................. 26
Adjusting the Rear Camera Guide .............. 26
Setting the Camera Interrupt ....................... 27
Auxiliary Setting ............................................. 27
Setting the AUX Mode ................................ 27
Apple CarPlay Setting ....................................27
Steering wheel Setting ................................. 27
Setting the Siri Microphone Effect ..............27
Selecting the Output Speaker ...................... 27
Adjusting the Microphone Level ................. 27
Radio Setting .................................................. 28
PI SEEK Setting .......................................... 28
Receiving RDS Regional (Local)
Stations .................................................... 28
Switching the Display Language of PTY
(Programme Type) ................................... 28
Setting PTY31 (Emergency Broadcast)
Reception .................................................28
Setting the TUNER (FM) Tone Quality
(Tuner Condition) ....................................28
Information
Product Software Update ................................ 29
In Case of Difficulty ....................................... 29
If this Message Appears .................................29
Specifications ..................................................30
Installation and
Connections
Warning .................................................. 31
Caution ................................................... 31
Precautions ............................................ 31
Installation ......................................................32
Uninstalling the original car stereo ............. 32
Mounting the Microphone ........................... 32
Installing the Unit ........................................32
Fix the Cables etc. .......................................32
Connections ....................................................34
System Example ............................................. 36
4-EN
Operating Instructions
USE THE CORRECT AMPERE RATING WHEN REPLACING
WARNING
FUSES.
Failure to do so may result in fire or electric shock.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER
CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS
STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
It is dangerous for the driver to watch TV/Video while driving a
vehicle. Installing this product incorrectly enables the driver to
watch TV/Video while driving. This may cause a distraction,
preventing the driver from looking ahead, thus causing an accident.
The driver or other people could be severely injured.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
5-EN
NOTICE
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and -20°C (-4°F) before turning your unit on.
Protecting the USB connector
• Only an iPhone 5 or later or USB memory device can be
connected to the USB connector on this unit. Correct
performance using other USB products cannot be guaranteed.
• If the USB connector is used, be sure to use only the supplied
connector cable with the unit. A USB hub is not supported.
• USB memory device is used for data file transfer or updates
only.
• This unit does not support USB memory’s Audio/Video
playback or photo browse.
Maintenance
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Installation Location
Make sure the iLX-700 will not be installed in a location subjected
to:
• Direct sun and heat
• High humidity and water
• Excessive dust
• Excessive vibrations
Operation of some of the functions of this unit is very complex.
Because of this, it was deemed necessary to place these functions
into a special screen. This will restrict operation of these functions
to times when the vehicle is parked. This ensures the focus of the
driver’s attention will be on the road and not on the iLX-700. This
has been done for the safety of the driver and passengers.
Some setup operations cannot be made if the car is moving. The car
must be parked and the parking brake must be engaged for the
procedure described in the Owner’s Manual to be valid. The
warning “Unable to operate while driving.” will be displayed if any
attempts are made to perform these operations while driving.
• The iLX-700 draws minimal current even when its power switch is
turned off. If the switched power (ignition) lead of the iLX-700 is
connected directly to the positive (+) post of the vehicle’s battery, the
battery may be discharged.
An SPST (Single-Pole, Single-Throw) switch (sold separately) can be
added to simplify this procedure. Then, you can simply place it in the
OFF position when you leave the vehicle. Turn the SPST switch back
ON before using the iLX-700. For connecting the SPST switch, refer
to the “Connection Diagram of SPST Switch (sold separately)”
(page 33). If the power (ignition) lead is unswitched, it must be
disconnected from the battery post should the vehicle be left unused
for an extended period of time.
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data,
etc., is lost while using this product.
• iPhone, iTunes and CarPlay are trademarks of Apple Inc.,
registered in the U.S. and other countries.
• “Made for iPhone,” means that an electronic accessory has been
designed to connect specifically to iPhone, respectively, and has
been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPhone may affect
wireless performance.
6-EN
Features
About Apple CarPlay
Apple CarPlay allows your iPhone 5 or later to operate smoothly from this head unit.
About Home Screen
The Home Screen for this unit gives direct access to those applications designed to work with Apple CarPlay.
The Apple CarPlay icon will indicate whether the appropriate iPhone is connected.
When iPhone is connected When iPhone is not connected
Audio Setup icon
Setup icon
Audio Setup icon
Setup icon
7-EN
Getting Started
Accessory List
• iLX-700.................................................................................1
• Power cable.........................................................................1
• Flush head screw (M5×8)....................................................4
• Screw (M5×8) ......................................................................4
• AUX/CAMERA/CAN cable ...................................................1
• USB extension cable ...........................................................1
• Microphone..........................................................................1
• Face plate............................................................................1
• Owner’s Manual ..............................................................1set
Location of Controls
Touch Operation
Many of the operations for this unit are accessible through a light touch
on the integrated touch panel.
• Be sure to touch the onscreen button lightly with the pad of your
finger to protect the display.
• If you touch a button and there is no reaction, remove your finger
from the display once, and try again.
• Onscreen buttons that cannot be operated appear dull in color.
Common onscreen buttons
[]:Returns to the previous screen. Depending on the
function, this button may cancel the operations
performed on the screen.
[]:Closes the window.
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Turn the ignition key to the ACC or ON position.
The system turns on.
button
Touch to turn down the volume. Touch and hold for at least 2
seconds to mute.
button
Touch to turn up the volume.
Siri button
Starts the Siri function of the iPhone.
Home button
Press to call up the Home Screen.
Press and hold for at least 5 seconds to turn the power off.
/ button
This action varies according to the Audio/Visual application.
(Track Up/Down, Fast reverse/Fast forward, etc.)
• You can reset the unit by pressing and holding Home and Siri
buttons at the same time for 10 seconds.
Connectable to Remote Control Interface Box
With an optional Alpine Steering Wheel Remote Control Interface
Box (not included), this unit is controllable from the vehicles
steering wheel controls. For details, contact your Alpine dealer.
About the button descriptions used in this Owner’s
Manual
The buttons found on the face of the unit are expressed in
bold (e.g. Home). The buttons found on the touch-screen
display are shown in bold within brackets, [ ] (e.g. []).
2
Press and hold the Home button for at least 5
seconds to turn the power off.
• The unit can be turned on by pressing Home button or Siri button.
• The iLX-700 is a precision device. Careful handling of the unit
should provide you with years of trouble-free operation.
8-EN
Turning the System On
Operating an Item in a List
With the Alpine system, when the ignition key is turned to ACC or ON,
the opening screen will be automatically displayed.
1
When the system is used for the first time, the
language selection menu is displayed. There are 20
languages to choose from. Touch the screen and
sliding your finger up and down, and then touch the
desired language.
2
Touch [OK].
The radio screen is displayed.
• When you turn on this unit first time, the demo mode starts
automatically, and the demonstration screens are displayed one after
another. To turn off Demo mode, refer to “Demonstration Setup”
(page 25).
• Some of this unit’s functions cannot be performed while the vehicle is
in motion. Be sure to stop your vehicle in a safe location and apply
the parking brake before attempting these operations.
1
To scroll through a list, touch the screen and slide
your finger up or down.
The screen will scroll along with your finger movement.
• To make a selection, touch the screen at the desired item, then
lift your finger without moving the screen up or down.
2
Touch the button and slide your finger right or left to
change ON/OFF.
Adjusting the Volume
Adjust the volume by touching or .
Volume increases continuously by touching and holding .
Volume: 0 - 35
Muting Quickly
Audio Mute function instantly lowers the volume level to 0.
Touch and hold for at least 2 seconds to activate the
mute mode.
The audio level will be 0.
Using Siri
You can use the Siri function of your iPhone. To use Siri from this unit,
make sure that this function is Enabled in your iPhone settings.
Press Siri.
About Hands-Free Phone
When connected to this unit, your iPhone can be used as hands-free.
Incoming calls are displayed with the caller’s ID when available.
• About iPhone models usable with this unit, refer to Apple CarPlay
section (page 13).
• You can adjust the volume of the phone or select the speakers to used
for the call’s audio. Refer to “Apple CarPlay Setting” (page 27).
• Avoid hands-free calls in heavy traffic or on narrow or winding
roads. Keep your focus on driving to prevent an accident.
• Close the windows while calling to reduce background noise.
• When using a microphone, speak as directly as you can into the
microphone to obtain the best sound quality.
9-EN
Parking Assist Interrupt Function
Applying TuneIt
When the unit is connected to the vehicle equipped CAN Interface box.
A Parking Assist screen may be tuned in if the obstacle within a certain
distance is detected by the front or rear sensor of your vehicle.
You can adjust the interrupt time for Parking Assist screen by “Setting
the Parking sensor interrupt time” on page 25.
• Depending on your vehicle, this function may not be supported.
When the obstacle within a certain distance is detected
by the front or rear sensor, the Parking Assist screen
displays and the indicator ( ~ ) of the corresponding
area lights up.
According to the distance from far to near, the colour of indicator
from yellow to orange to red.
Display example for Parking Assist screen
This unit’s sound tuning is programmable from a connected iPhone. It is
also possible to download specific parameters for certain vehicles from
Alpine’s TuneIt database stored in the Cloud. Using the TuneIt App,
customized parameters can also be uploaded for others to share and rate.
The installed TuneIt App should be launched on the iPhone before
connecting to the head unit.
TuneIt, is downloadable from Apple’s App Store. For details, consult
your Alpine dealer.
• The application programme and related specifications and data may
be deleted or terminated without notice.
• About iPhone models usable with this unit, refer to Apple CarPlay
section (page 13).
Adjusting the sound via the iPhone
After completing the procedure above, your iPhone can be used to make
audio adjustments for this unit.
1
Make sure the unit is powered on.
2
Launch the TuneIt App on the iPhone. Adjust the
unit’s sound accordingly on the iPhone.
• Volume level cannot be adjusted via the iPhone.
• The setting cannot be done on both the iPhone and this unit at the
same time.
• When the unit is powered off, etc., sound setting cannot be done via
the iPhone.
• Please obey all local traffic laws while using this function.
• You can also activate the Parking Assist screen by touch the Parking
Assist icon on the Home screen.
Access to Climate Mode
When the unit is connected to the vehicle equipped CAN Interface box,
you can check the vehicle’s air conditioning.
You can adjust the interrupt time for Climate screen by “Setting the
Climate screen interrupt time” on page 25.
The Climate screen will be tuned in if you adjust the air
condition in your vehicle.
The Climate mode screen is displayed. You can check the
information of your vehicle’s air condition from the screen.
Display example for Climate screen
• Depending on the car type, some functions may not be available even
though the CAN Interface box is connected.
• You can also activate the Climate screen by touch the Climate icon
on the Home screen.
10-EN
Radio
Display example for Radio main screen
slide your finger
left or right
Presetting Stations Manually
1
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
2
Touch and hold any one of the preset buttons for at
least 2 seconds.
The selected station is stored.
3
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 30 stations can be stored in the preset memory
(6 stations for each band; FM1, FM2, FM3, MW or LW).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorised.
Preset No. indicator display
Band display
Frequency display
Audio Setup button (See “Audio Setup Operation” on
page 18)
Function key
Preset button
Listening to the Radio
1
Press the Home button.
The Home screen is displayed.
2
Touch [Radio].
The radio mode is activated and the display changes to the
Radio mode screen.
3
Touch [] to select the desired radio band.
Each touch changes the bands as follows:
FM-1 FM-2 FM-3 MW LW FM-1
4
Touch [Tune] to select the tuning mode.
DX Seek Local Seek Manual
• There are two modes you can select for auto tuning, DX and
Local:
- DX (Distance) mode;
Both strong and weak stations will be tuned in.
- Local mode;
Only strong stations will be tuned in.
The initial setting is DX.
• If “Preset” or “PTY” appears touch [Tune] repeatedly until a
tuning mode is displayed.
Presetting Stations Automatically
The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
After selecting the desired band, touch and hold
[A.Memo] for at least 2 seconds.
The tuner automatically seeks and stores 6 strong stations into
the preset buttons in order of signal strength.
When automatic storing has completed, the station stored in the
preset 1 is selected.
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.
• You can cancel this process by touching [A.Memo] while the tuner is
automatically seeking stations. Cancelling will return the tuner
preset to the previous setting.
Tuning to Preset Stations
Select the desired preset in any band to tune to the station stored in that
preset number.
1
Touch [] repeatedly until the desired band is
displayed.
2
Touch any one of the preset buttons that has a
station stored to it.
The preset station is received.
• You can also switch the preset station by touching [ ] or [ ] when
the tuning mode of “Preset” is chosen.
5
Touch [], [] or [], [] to change the radio
frequency up or down respectively.
In manual mode, touch and hold to change the frequency
continuously.
11-EN
RDS
Display example for RDS Information
slide your fi nger
left or right
Preset No. indicator display
Band display
Frequency display
Function key
Preset button
Info area
RDS indicator
Audio Setup button (See “Audio Setup Operation” on
page 18)
Turning AF (Alternative Frequencies) On or Off
The RDS (Radio Data System) is a radio information system using the
57 kHz subcarrier of regular FM broadcasts. The RDS allows you to
receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1
Press the Home button.
2
Touch [Radio].
The radio mode is activated and the display changes to the
Radio mode screen.
• The display content varies depending on the last band selected.
(eg. [RadioFM1], etc.)
Tips
• If the unit receives the PTY31 (Emergency Broadcast) signal, the unit
will show “Alarm” in the display only when PTY31 is set to On. For
operation, refer to “Setting PTY31 (Emergency Broadcast)
Reception” (page 28).
• The RDS digital data includes the following:
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
TP Traffic Programme
TA Traffic Announcement
PTY Programme Type
EON Enhanced Other Networks
• Refer to page 28 about “PI SEEK Setting”, “Receiving RDS
Regional (Local) Stations”, “Switching the Display Language of
PTY (Programme Type)” and “Setting PTY31 (Emergency
Broadcast) Reception” .
Receiving Traffic Information
Touch [TA] to turn on the Traffic Information mode.
The TA indicator lights up.
When the traffic information station is tuned in, the TP indicator
lights up.
Traffic information is heard only when it is being broadcast. If
traffic information is not being broadcast, the unit is set in the
standby mode.
When a traffic information broadcast begins, the unit
automatically receives it and the display shows “T.Info”.
When the traffic information broadcast is over, the unit will
automatically be set to the standby mode.
• If the traffic information broadcast signal falls below a certain level,
the unit remains in the receiving mode for 1 minute. If the signal
remains below a certain level for over 70 seconds, “TA” will blink in
the display.
• If you do not want to listen to traffic information being received,
touch [TA] to skip that traffic information message.
The T. Info mode will remain in the ON position to receive the next
traffic information message.
• If the volume level is changed while receiving traffic information, the
changed volume level will be memorised. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorised.
• If the Traffic Information mode is activated, the unit automatically
switches to radio source (even if you select another source except
navigation) and receives the traffic information broadcast. When the
traffic information is finished, the unit returns to the previous source.
3
Touch [AF] of Bottom banner to select the AF
(Alternative Frequency) ON or OFF mode.
In AF ON mode, the “AF” Indicator lights up.
• RDS mode is not be displayed for the MW or LW band.
• When the AF ON mode is selected, the unit automatically tunes to a
strong signal station in the AF list.
• Use the AF OFF mode when automatic re-tuning is not required.
12-EN
Receiving Traffic Information Manually
1
Touch [TA] to turn on the Traffic Information mode.
The TA indicator lights up.
2
Touch [] or [].
Seeks the broadcast station which is broadcasting the
traffic information.
• You can seek the traffic information in DX Seek mode or Local Seek
mode.
PTY (Programme Type) Tuning
1
Touch [PTY Search].
The Select PTY list screen is displayed.
2
Touch the selected programme type to start
searching for a station of that type.
If no PTY station is found, “No PTY.” will be displayed.
3
Touch [Tune] to choose the PTY tuning mode.
The PTY mode is activated.
4
To select the station in PTY, touch [] or [].
Priority News
This function gives priority to the News programme. Whenever the
News programme broadcasts, it will interrupt the programme you are
currently listening to.
Touch [News] to activate the PRIORITY NEWS mode.
The “NEWS” indicator appears in the display. Touch [News]
again to deactivate the Priority News mode and return to the
programme you were previously listening to.
Apple CarPlay (Optional)
Apple CarPlay is a smarter, safer way to use your iPhone in the car.
Apple CarPlay takes the things you want to do with your iPhone while
driving and puts them right on iLX-700. You can get directions, make
calls, send and receive messages, and listen to music, all in a way that
allows you to stay focused on the road. Just plug in your iPhone to
iLX-700 and go.
• Before using this function, plug in your iPhone using Lightning to
USB Cable (Supplied with iPhone) to iLX-700.
• Some functions may not be available while driving.
About iPhone models usable with this unit
• The following devices have been tested and shown to work with this
unit. Correct function of earlier versions cannot be guaranteed.
iPhone 5s : Ver.7.1
iPhone 5c: Ver.7.1
iPhone 5 : Ver.7.1
Access to Apple CarPlay
1
Press the Home button.
The Home screen is displayed.
2
Touch [Apple CarPlay].
The Apple CarPlay mode is activated.
Touch the desired App icon on iLX-700, or use Siri function
by pressing Siri button.
• The App must be Apple CarPlay compatible in order to appear in the
Home screen.
Displaying Radio Text
Text messages from a radio station can be displayed.
1
Tune in a radio station that transmits text messages.
2
Touch the Info area ( ) (page 12) in FM radio mode
repeatedly to switch to the desired display.
Song Info Mode (PS/PTY/Title Name/Artist Name/Album
Name)
Radio Text Mode (PS/Radio Text)
13-EN
Loading...