Alpine PSS-SX01 Installation Guide
PSS-SX01
Complete Weather-Resistant
Powersports Sound System
Installation Manual
Powersports
PSS-SX01 v20200724 1/9
Introduction
Congratulations on purchasing the PSS-SX01. This installation manual is designed to give you an overview
of how to install the PSS-SX01. Please familiarize yourself with the owners manual before attempting the
installation. If you still have additional questions please call 1-800-TECH-101.
Note
Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning
Caution
Ignoring the content marked by this indication and using the product incorrectly is
expected to lead to death or serious injury.
Ignoring the content marked by this indication and using the product incorrectly is only
expected to lead to injury or property damage.
Forbidden
Forbidden
Mandatory
Forbidden
Forbidden
Mandatory
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Types of Precautions
Mandatory
Indicates actions that are
forbidden (must not be
performed)
Powersports
PSS-SX01 v20200724 2/9
When making a hole in the vehicle body, be
careful to avoid damaging pipes, the fuel tank,
electrical wiring, and the like. This kind of
damage could lead to an accident or fire.
Indicates that disassembly is
forbidden.
Indicates actions that are
mandatory (must be performed)
Marks content that should receive
your full attention.
Warning
Do not disassemble or modify the product.
Doing so could lead to an accident, fire, or
electric shock.
Store screws and other small objects where
children cannot reach them. If one of those
small objects is swallowed, consult with a
doctor immediately.
When replacing fuses be sure to
use the fuses with the specified current
rating. Failing to do so could lead to
an accident or fire.
Only connect the product to a 12 VDC negative
ground car. Failing to do so could lead to an
accident or fire.
Do not cut the insulation on a cord and take
power from another device. Doing so could
lead to fire or electric shock.
Do not install the product in a location where
it willl obstruct the driver’s forward view;
interfere with the operation of the steering
wheel, gear shift, or the like; or pose a threat
to passengers. Doing so could lead to an accident or injury.
When installing and grounding the product, do
not use any of the bolts or nuts of the steering
wheel, brakes, fuel tank, or the like. Doing so
could make the brakes stop working or could
lead to fire.
Do not install the product near the passengerside airbag. Doing so could interfere with the
operation of the airbag and lead to an accident or injury.
Bundle cords so that they don’t interfere with
driving. Wrapping cords around the steering wheel, gearshift, brake pedal, or the like
could lead to an accident or damage equipment.
Caution
Connect the product properly according to the
instructions. Failing to do so could lead to fire
or an accident.
Do not sandwich cords between the seat
railing or allow them to touch protrusions. Resulting breaks or shorts could lead to electric
shock or fire.
Do not block vents or heat sinks. Doing so
could lead to fire or damage equipment.
Use the accessories according to the instructions, and attach them securely. Failing to
do so could lead to an accident or damage
equipment.
Do not install the product where it may be exposed to water or in a place with high levels
of humidity or dust. Doing so could lead to fire
or damage equipment.
The installation and wiring of this product requires specialized skills and experience. Have
the product installed by an Alpine authorized
dealer.
PSS-SX01 v20200724 3/9
Tools Potentially Needed
Wire Strippers Wire Cutters Step Drill Bit
Socket Set With 19mm Socket Extension Ratchet
Phillips Screwdriver Torx Bits Air Saw
Powersports
Panel Removal Tools Wire Fishing Tool Cordless Power Drill
Digital Multimeter Flathead Screwdriver
Loading...