Alpine IDA-X001 User Manual

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/
PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK

R

Digital Media Receiver

iDA-X001

• QUICK REFERENCE GUIDE
Please read before using this equipment.

• KURZANLEITUNG
Lesen Sie diese Kurzanleitung bitte vor Gebrauch
des Gerätes.

EN

DE

FR

• GUIDE DE RÉFÉRENCE RAPIDE

• GUÍA DE REFERENCIA RÁPIDA

• GUIDA RAPIDA

•SNABBGUIDE

ALPINE ELECTRONICS MARKETING, INC.

1-1-8 Nishi Gotanda,

Shinagawa-ku,

Tokyo 141-0031, Japan

Phone [phone]

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

Phone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF CANADA, INC.

777 Supertest Road, Toronto,

Ontario M3J 2M9, Canada

Phone 1-800-ALPINE-1 (1-800-257-4631)

YAMAGATA (Wuxi) Co., Ltd.
Block 28-25,Changjiang Nanlu, WND, jiangsu, China

Veuillez lire avant d’utiliser cet appareil.

Léalo antes de utilizar este equipo.

Si prega di leggere prima di utilizzare il
attrezzatura.

Innan du använder utrustningen bör du läsa igenom
denna snabbguide.

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

161-165 Princes Highway, Hallam

Victoria 3803, Australia

Phone [phone]

ALPINE ELECTRONICS GmbH

Frankfurter Ring 117, 80807 München, Germany

Fletchamstead Highway, Coventry CV4 9TW, U.K.

B.P. 50016, 95945 Roissy Charles de Gaulle

Phone [phone]

ALPINE ELECTRONICS OF U.K. LTD.

Alpine House

Phone [phone]

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,

Cedex, France

Phone [phone]

Viale C. Colombo 8, 20090 Trezzano

ALPINE ELECTRONICS DE ESPAÑA, S.A.

Portal de Gamarra 36, Pabellón, 32

01013 Vitoria (Alava)-APDO 133, Spain

ALPINE ELECTRONICS (BENELUX) GmbH

Leuvensesteenweg 510-B6,

ALPINE ITALIA S.p.A.

Sul Naviglio (MI), Italy

Phone [phone]

Phone [phone]

1930 Zaventem, Belgium

Phone [phone]

Designed by ALPINE Japan

Printed in China (Y)

ES

IT

SE

68-08564Z75-A

ENGLISH

Contents

WARNING

WARNING ................................................. 1

CAUTION .................................................. 2

PRECAUTIONS ........................................ 3

Center Jog Dial Operation ...............4

Getting Started.................................. 5

Radio.................................................. 6

RDS .................................................... 7

iPod®.................................................. 8

Specifications ................................. 11

Installation....................................... 11

Connections.................................... 14

WARNING

WARNING

This symbol means important instructions.
Failure to heed them can result in serious
injury or death.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR
VEHICLE.

Any function that requires your prolonged attention should only
be performed after coming to a complete stop. Always stop the
vehicle in a safe location before performing these functions.
Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.

Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.

The Quick Reference Guide explains basic
operation of Radio, Radio Data System and iPod
functions. For details on operation, refer to the
iDA-X001 Owner's Manual, which may be
downloaded from the ALPINE homepage (http://
www.manuals.alpine-europe.com).
Also, if required, an Alpine dealer will readily
provide a print out of the Owner’s Manual.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire,
electric shock or other injury.

1-EN

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or
product damage.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to
electrical shorts.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.

When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes, fuel
lines, tanks or electrical wiring. Failure to take such precautions
may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could
disable control of the vehicle and cause fire etc.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL
OR SHIFT LEVER.

Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct
or hang up on places such as the steering wheel, shift lever, brake
pedals, etc. can be extremely hazardous.

CAUTION

This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.

HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.

The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.

Be sure to use only the specified accessory parts. Use of other
than designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal,
use a rubber grommet to prevent the wire’s insulation from being
cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.

Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit
may result in product failure.

2-EN

PRECAUTIONS

About iPods usable with this unit

• The unit can be used with the fourth generation and above
iPod, iPod photo, iPod mini or the first generation iPod nano
only. However, future generation iPod compatibility cannot be
guranteed.

• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.

• The unit can be used with the following iPod.

<USB connected>

Fifth generation iPod
First generation iPod nano

<Directly connected>

Fourth generation iPod
Fifth generation iPod
iPod photo
iPod mini
First generation iPod nano

• If the unit is used with iPod software versions of iTunes earlier than

7.0.0.1, correct function and performance are not guaranteed.

Protecting the USB connector

• Only an iPod or USB memory can be connected to the USB
connector on this unit. Correct performance using other USB
products cannot be guaranteed.

• If the USB connector is used, be sure to use only the supplied
connector cable with the unit. A USB hub is not supported.

• Depending on the connected USB memory device, the unit
may not function or some functions may not be performed.

• The audio file format that can be played back on the unit is
MP3/WMA/AAC.

• Artist/song name, etc., can be displayed, however characters
may not be correctly displayed.

On Handling USB Memory

• To prevent malfunction or damage, note the following points.

Read the USB memory Owner’s Manual thoroughly.
Do not touch the terminals by hand or metal.
Do not subject USB memory to excessive shock.
Do not bend, drop, disassemble, modify or soak in the water.

• Avoid usage or storage in the following locations:

Anywhere in the car exposed to direct sunlight or high
temperatures.
Anywhere the possibility of high humidity or corrosive
substances are present.

• Fix the USB memory in a location where driver operation will
not be hindered.

• USB memory may not function correctly at high or low
temperature.

• Use only certified USB memory. Note that even certified USB
memory, may not function correctly depending on its type or
state.

• USB memory function is not guaranteed. Use USB memory
according to the terms of agreement.

• Depending on the settings of the USB memory type, memory
state or encoding software, the unit may not play back or
display properly.

• A file that is copy-protected (copyright protection) cannot be
played back.

• USB memory may take time to start playback. If there is a
particular file other than audio in the USB memory, it may take
considerable time before the file is played back or searched.

• The unit can play back “mp3,” “wma” or “m4a” file extensions.

• Do not add the above extensions to a file other than audio data.
This non-audio data will not be recognized. The resulting
playback may contain noise that can damage speakers and/or
amplifiers.

• It is recommended to back up important data on a personal
computer.

• Do not remove the USB device while playback is in progress.
Change SOURCE to something other than USB, then remove
the USB device to prevent possible damage to its memory.

CAUTION

Alpine accepts no responsibility for lost data, etc., even if data, etc.,
is lost while using this product.

• Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.

• Apple, the Apple logo, iPod and iTunes are trademarks of
Apple Computer, Inc., registered in the U.S. and other
countries.

• “MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.”

• “Supply of this product only conveys a license for private,
non-commercial use and does not convey a license nor imply
any right to use this product in any commercial (i.e. revenue­generation) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
For details, please visit http://www.mp3licensing.com”

• “Uni-Type™” is a style of Universal design font developed by
a joint reserch between LIM Corporation Ltd., and Chiba
University Faculty of Engineering.

• “Uni-Type™” is the trademark registered by LIM
Corporation Ltd.

3-EN

Center Jog Dial
Operation

The Center Jog Dial is used when you adjust volume, select list items,
etc., by turning it left or right. You can turn the Center Jog Dial left or
right in two steps, and settings change depending on the steps.

Center Jog Dial

Centre position

Turning One Step

Turning One Step

Turning and
holding
(changes
continuously)

After turning the Center Jog Dial, it will return to its centre
position automatically when you release it.

Turning and
holding
(changes
continuously)

4-EN

Getting Started

Turning Power On and Off

ON :

Press SOURCE/ .

OFF :

Press and hold SOURCE/ for at least 2 seconds

Changing the Source

Press SOURCE/ repeatedly.

Select the desired mode.

iPod : If a USB connection to an iPod is used.
iPod2 : If an iPod is directly connected using the ALPINE FULL

SPEED™ Connection Cable (KCE-422i).
USB Memory : Displayed when USB memory is connected.
CD CHG : Displayed when a CD changer is connected.

Adjusting Volume

DOWN UP

Changing the Display

Press VIEW repeatedly.

In each audio mode, the display changes every time VIEW is pressed.

5-EN