RR
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN
AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/
ТОЛЬКО ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIE
CD/USB RECEIVER WITH ADVANCED BLUETOOTH
EN
DIGITAL MEDIA RECEIVER WITH ADVANCED BLUETOOTH
• OWNER’S MANUAL
Please read before using this equipment.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
CDE-193BT
UTE-92BT
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa
igenom denna användarhandledning.
• GEBRUIKERSHANDLEIDING
Lees deze aanwijzingen aandachtig alvorens dit
toestel te gebruiken.
• РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
Прочтите настоящее руководство перед
началом использования оборудования.
• INSTRUKCJA OBSŁUGI
Prosimy zapoznać siç z tą instrukcją przed
przystąpieniem do użytkowania urządzenia.
DE
FR
ES
IT
SE
NL
RU
ALPINE ELECTRONICS MARKETING, INC.
1-7, Yukigaya-Otsukamachi, Ota-ku,
Tokyo 145-0067, JAPAN
Phone: 03-5499-4531
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
ALPINE ELECTRONICS GmbH
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Fletchamstea d Highway, Coventry CV4 9TW, U.K.
ALPINE ELECTRONICS France S.A.R.L.
Alpine Hous e
www.alpine.co.uk
184 allée des Erables
CS 52016 – Villepinte
95 945 Roissy CDG cedex
FRANCE
Phone : + 33(0)1 48 63 89 89
ALPINE ITALIA S.p.A.
Viale Cristoforo Colombo, 8
20090 Trezzano sul Naviglio MI, Italy
Phone +39 02 484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de G amarra 36, Pabellón, 3 2
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
Designed by ALPINE Japan
68-30368Z32-A
PL
Contents
Operating Instructions
WARNING
WARNING.......................................................6
CAUTION........................................................ 6
PRECAUTIONS ...............................................6
Getting Started
Accessory List ...............................................................9
Turning Power On and Off....................................... 9
Demonstration Function .......................................... 9
Turning the Demonstration mode Off ............9
Source Selection..........................................................9
Detaching and Attaching the Front Panel .........9
Detaching ..................................................................9
Attaching ................................................................ 10
Initial System Start-Up............................................ 10
Adjusting Volume .................................................... 10
Setting the Dimmer Control
(CDE-193BT only) ..................................................... 10
Setting Time............................................................... 10
Radio
Listening to Radio .................................................... 11
Presetting Stations Manually............................... 11
Presetting Stations Automatically...................... 11
Tuning to Preset Stations ...................................... 11
Frequency Search Function.................................. 11
RDS
Turning AF (Alternative Frequencies)
ON/OFF ........................................................................ 12
Receiving RDS Regional (Local) Stations ......... 12
PI SEEK Setting .......................................................... 12
Receiving Traffic Information............................... 12
PTY (Programme Type) Tuning ........................... 13
Receiving Traffic Information While Playing
USB Audio or Radio ................................................. 13
Displaying Radio Text ............................................. 13
ENGLISH
CD/MP3/WMA/AAC (CDE-193BT only)
Playback .......................................................................14
Repeat and Random Play ......................................14
Searching for CD Text..............................................14
Folder/File Name Search
(concerning MP3/WMA/AAC) ..............................14
Folder Name Search mode................................14
File Name Search mode .....................................15
Search Position Memory ........................................15
About MP3/WMA/AAC ...........................................15
Terminology ...........................................................16
Sound Setting
Adjusting Subwoofer Level/Bass Level/
Treble Level/Balance (Between Left and Right)/
Fader (Between Front and Rear)/Defeat...........16
Sound Setting ............................................................17
Equalizer Presets ...................................................17
Setting BASS ENGINE SQ ON/OFF ..................17
Displaying the BASS ENGINE SQ
PARAMETER ............................................................17
Adjusting the Parametric Equalizer Curve
(9BAND P-EQ).........................................................17
Adjusting the Frequency (CENTER FRQ) ............17
Setting the Bandwidth (WIDTH (Q)) ....................17
Adjusting the Level ....................................................18
Setting the Source Volume Level....................18
Adjusting the Crossover Settings
(X-OVER)...................................................................18
Selecting the Cut-Off Frequency
(FREQUENCY)...............................................................18
Adjusting the Slope (SLOPE) ..................................18
Adjusting the Level (LEVEL) ....................................18
Turning Subwoofer ON/OFF.............................18
Setting the Subwoofer Phase...........................18
Setting the Subwoofer System ........................18
Setting the Time Correction Unit
(LENGTH) .................................................................19
Adjusting the Time Correction (TCR).............19
External Device......................................................19
Connecting to an External Amplifier
(POWER IC)....................................................................19
Setting the Media Xpander mode..................19
BASS ENGINE SQ Function.....................................20
Switching BASS ENGINE SQ mode .................20
Adjusting BASS ENGINE SQ Level ...................20
About Time Correction ...........................................20
Example 1. Listening Position:
Front Left Seat........................................................20
Example 2. Listening Position: All Seats .......20
About the Crossover ................................................22
3-EN
Contents
ENGLISH
Other Functions
Displaying the Text.................................................. 24
About “Text” .......................................................... 24
Using the Front AUX Input Terminal ................. 24
Option Menu Setting .............................................. 24
Applying Alpine TuneIt App ................................ 25
Adjusting the sound via the
Smartphone ........................................................... 25
Facebook Notification Function ..................... 26
Receiving Notification..............................................26
Displaying Notification List.....................................26
SETUP
Setting.......................................................................... 26
General Setting..................................................... 27
Setting the Time to automatically be
adjusted.........................................................................27
Turning the Clock Display ON/OFF......................27
Setting the Menu Language ..................................27
Setting the AUX SETUP mode................................27
Setting the AUX NAME mode................................27
Setting the interrupt mode....................................27
Playing MP3/WMA/AAC Data (PLAY MODE)
(CDE-193BT only)........................................................27
Setting the stay on mode........................................28
Demonstration............................................................28
Setting Adaptive Steering Remote Control ......28
Setting the Opening Screen Update...................28
Display Setting...................................................... 29
Changing Lighting Colour ......................................29
Dimmer Control ..........................................................29
Adjusting the Dimmer Level ..................................29
Scroll Setting (TEXTSCROLL) ..................................29
Scroll Type Setting.....................................................29
Tuner Setting......................................................... 29
Setting the TUNER (FM) tone quality
(FM SET) .........................................................................29
iPod Setting ........................................................... 30
iPod/iPhone Search Mode Setting .......................30
Application Setting (APP) ................................. 30
Setting the communication mode with a
Smartphone (ALPINE APP)......................................30
Setting the TTS (Text To Speech) volume..........30
BT Hands Free Calling
Setup Before Using.................................................. 30
About Bluetooth® ................................................ 30
Before Using Bluetooth Function................... 30
How to connect to a Bluetooth compatible
device (Pairing) ..................................................... 31
For Bluetooth compatible device with SSP
(Secure Simple Pairing)............................................31
For Bluetooth compatible device without SSP
(Secure Simple Pairing)............................................31
Auto pairing with an iPod/iPhone........................31
Bluetooth SETUP .......................................................31
Setting the Bluetooth Connection
(BT IN)........................................................................31
Setting the Auto Pairing with
iPod/iPhone ............................................................32
Setting the Bluetooth Device...........................32
Setting the Visible Mode....................................32
Setting the Bluetooth sound quality .............32
Adjusting the volume (SOURCE VOL) .................32
Sound Auto setting (TYPE SET ) .............................32
Setting the caller information display
ON/OFF.....................................................................32
Setting the Phone Book Update .....................33
Setting the Phone Book Auto Update ON/OFF
(AUTO) ............................................................................33
Setting the Phone Book Manual Update ON/OFF
(MANUAL)......................................................................33
Changing the Phone book List Order ...........33
Selecting the output speaker...........................33
Displaying the firmware version .....................33
Updating the firmware .......................................33
Hands-Free Phone Control....................................33
About the Hands-Free Phone...........................33
Answering a Call ...................................................33
Hanging up the Telephone ...............................33
Calling.......................................................................34
Redialling a Number In Outgoing History.........34
Dialling a Number In Incoming History .............34
Dialling a Number In Incoming Missed Call
History............................................................................34
Dialling a Number In The Phone Book ...............34
Phone book Alphabet Search Function .............34
Voice Control Operation ....................................35
Call waiting function ...........................................35
Preset a number in the Phone Menu
(Shortcut dial) ........................................................35
Dialling the preset number ...............................35
Adjusting the volume when receiving a
Call .............................................................................35
Muting the microphone input quickly
(Voice Mute) ...........................................................35
Call Switching Operation ...................................35
Bluetooth Audio Operation ..................................36
Recalling the Bluetooth Audio Mode............36
Selecting the desired Song ..............................36
Pausing.....................................................................36
Selecting the desired Group.............................36
Searching for a desired song............................36
4-EN
Contents
USB Memory (optional)
Playback MP3/WMA/AAC/FLAC Files from USB
Memory (optional)................................................... 36
About MP3/WMA/AAC/FLAC File of USB
Memory ....................................................................... 37
iPod/iPhone (optional)
Connecting an iPod/iPhone ................................. 37
Setting the iPod Control ........................................ 38
Playback ...................................................................... 38
Searching for a desired Song............................... 38
Direct Search Function........................................... 39
Select Playlist/Artist/Album/Genre/Composer/
Episode ........................................................................ 39
Alphabet Search Function .................................... 39
Search Position Memory ....................................... 39
Random Play Shuffle (M.I.X.) ................................ 40
Repeat Play................................................................. 40
Displaying the Text.................................................. 40
Information
In Case of Difficulty.................................................. 41
Basic.......................................................................... 41
Radio......................................................................... 41
CD (CDE-193BT only) .......................................... 41
MP3/WMA/AAC .................................................... 41
Audio........................................................................ 41
iPod ........................................................................... 41
Indication for CD Player
(CDE-193BT only) ................................................. 41
Indication for USB Memory .............................. 42
Indication for iPod Mode................................... 42
Bluetooth mode ................................................... 43
Specifications ............................................................ 44
ENGLISH
Installation and Connections
WARNING.....................................................45
CAUTION...................................................... 45
PRECAUTIONS .............................................45
Installation .................................................................. 46
Removal................................................................... 46
Mounting the Microphone................................... 47
Connections ............................................................... 48
5-EN
Operating Instructions
CAUTION
WARNING
WARNING
This symbol means important instructions. Failure
to heed them can result in injury or material
property damage.
This symbol means important instructions. Failure
to heed them can result in serious injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY
FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do so
may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE
NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
KEEP SMALL OBJEC TS SUCH AS BATTERIES OUT OF THE REACH OF
CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult
a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and −10°C (+14°F) before turning your unit on.
Moisture Condensation
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
Maintenance
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service Station
for servicing.
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION
SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
6-EN
Inserting Discs
Centre Hole
Centre Hole
New Disc
Outside
(Bumps)
Bumps
Transparent Sheet Disc Stabilizer
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“ERROR” will be displayed on your player if you insert a disc
incorrectly. If “ERROR” continues to be displayed even though the
disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
New Discs
To prevent the CD from jamming, “ERROR” is displayed if discs
with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the centre hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, and then
insert the disc again.
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the
CD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the centre of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
recommend not using these accessories on discs played in Alpine
CD players.
Irregular Shaped Discs
Be sure to use round discs only for this unit and never use any
special shaped discs.
Use of special shape discs may cause damage to the mechanism.
Installation Location
Make sure this unit will not be installed in a location subjected to:
•Direct sun and heat
• High humidity and water
• Excessive dust
•Excessive vibrations
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT CORRECT
On handling Compact Discs (CD/CD -R/CD-RW)
• Do not touch the surface.
• Do not expose the disc to direct sunlight.
• Do not affix stickers or labels.
• Clean the disc when it is dusty.
• Make sure that there are no bumps around the disc.
• Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time. Never
expose the disc to direct sunlight. Heat and humidity may damage
the CD and you may not be able to play it again.
To cu stom er s u si ng CD -R/CD- RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalised).
• Finalise the CD-R/CD-RW if necessary, and attempt playback again.
About media that can be played
Use only compact discs with the label side showing the CD logo
marks below.
If you use non-standard compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordables)/CD-RWs
(CD-ReWritables) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC
formatted audio files.
• Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), CDs
recorded under unstable conditions, CDs on which a recording failed
or a re-recording was attempted, copy-protected CDs which do not
conform to the audio CD industry standard.
7-EN
• Use discs with compressed audio files written in a format compatible
with this unit. For details, refer to “About MP3/WMA/AAC” on
page 15.
• Data files, other than audio, on the disc are ignored and are not
played back.
Protecting the USB Port
• Only USB Memory devices or iPod/iPhone can be connected to the
USB port on this unit. Correct performance using other USB
products cannot be guaranteed. A USB hub is not supported.
• Depending on the shape or size of a USB device, it may not be
connected to the USB terminal of this unit-a USB extension (sold
separately) is recommended for this connection.
Avoid connecting USB memory and Front Aux at the same time.
• If a USB device is inserted in the unit, it projects out and may be a
danger while driving.
Use a commercially available USB extension cable, and connect it in a
safe way.
• Depending on the connected USB memory device, the unit may not
function or some functions may not be performed.
• The audio file format that can be played back on the unit is MP3/
WMA/AAC/FLAC.
• Artist/song name, etc., can be displayed, however some characters
may not be correctly displayed.
On Handling USB Memory
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data,
etc., is lost while using this product.
• To prevent malfunction or damage, note the following points.
Read the USB memory Owner’s Manual thoroughly.
• Fix the USB Memory in a location where driver operation will not be
hindered.
• USB memory may not function correctly at high or low temperature.
• Use only certified USB Memory Devices. Please pay attention that
even certified USB Memory, may not function correctly depending
on its type or state.
• USB memory function is not guaranteed. Use USB memory
according to the terms of agreement.
• Depending on the settings of the USB memory type, memory state or
encoding software, the unit may not play back or display properly.
• A file that is copy-protected (copyright protection) cannot be played
back.
• USB memory may take time to start playback. If there is a particular
file other than audio in the USB memory, it may take considerable
time before the file is played back or searched.
• The unit can play back “mp3”, “wma”, “m4a” or “flac” file extensions.
• Do not add the above extensions to a file other than audio data. This
non-audio data will not be recognised. The resulting playback may
contain noise that can damage speakers and/or amplifiers.
• It is recommended to back up important data on a personal
computer.
• Do not remove the USB device while playback is in progress. Change
SOURCE to something other than USB, and then remove the USB
device to prevent possible damage to its memory.
• Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United States
and/or other countries.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
• “Made for iPod,” and “Made for iPhone,” mean that an electronic
accessory has been designed to connect specifically to iPod, or
iPhone, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with iPod, or
iPhone may affect wireless performance.
•The Bluetooth
owned by Bluetooth SIG, Inc. and any use of such marks by Alpine
Electronics, Inc. is under license.
• MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson. Supply of this product only conveys a licence for
private, non-commercial use and does not convey a licence nor
imply any right to use this product in any commercial (i.e.
revenue-generation) real time broadcasting (terrestrial, satellite,
cable and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent licence for such use is required. For
details, please visit http://www.mp3licensing.com
• Android is a trademark of Google Inc.
• The Android robot is reproduced or modified from work created and
shared by Google and used according to terms described in the
Creative Commons 3.0 Attribution License.
®
word mark and logos are registered trademarks
8-EN
Getting Started
/
e
/DIM.
/SETUP
/ENTER
/SOURCE
Rotary encoder
/
e
AUDIO/SETUP
/ENTER
/SOURCE
Rotary encoder
CDE-193BT
UTE-92BT
Note
• The buttons on this Owner’s Manual use CDE-193BT as an example.
Demonstration Function
This unit will enter a demonstration mode to display its various
functions. When Demo mode is set to ON (initial setting), the unit starts
the demonstration if there is no operation for 30 seconds.
Turning the Demonstration mode Off
There are two methods to close the demonstration mode.
Method 1:
When installing this unit in a car for the first time, the DEMO OFF screen
will be displayed for 20 seconds after turning on the unit. Press
ENTER within 20 seconds to put the demonstration mode into
standby state
Method 2:
Setting DEMO MODE to OFF (standby state
closed state
* For details about standby state and completely closed state, please refer
to “Demonstration” on page 28.
*
.
*
) in Setup menu.
*
) or QUITE OFF (completely
Source Selection
Press VSOURCE to change the source.
TUNER DISC*1 USB AUDIO/iPod*2 BT AUDIO*3
AUXIL IARY
*1 CDE-193BT only.
*2 Displayed only when the iPod/iPhone is connected.
*3 Displayed only when BT IN is set to ON, refer to “Setting the
*4 Refer to “Using the Front AUX Input Terminal” on page 24.
*4
TUNER
Bluetooth Connection (BT IN)” on page 31.
Detaching and Attaching the Front Panel
Accessory List
• Head Unit ..................................................................................1
• Power Cable ..............................................................................1
• Microphone ..............................................................................1
• Mounting Sleeve ......................................................................1
• Carrying Case............................................................................1
• Rubber Cap ...............................................................................1
• Hex Bolt.....................................................................................1
• Bracket Key ...............................................................................2
• Screw (M5 × 8) ..........................................................................4
• Owner’s Manual..................................................................1 set
Turning Power On and Off
Press t to turn on the unit.
Note
• The unit can be turned on by pressing any other button except
(CDE-193BT only) and e (Release).
Press and hold t for at least 2 seconds to turn off the
unit.
Note
• The first time power is turned on, the volume will start from level 0.
Detaching
Notes
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
• When detaching the front panel, do not apply excessive force as it may
result in malfunction.
9-EN
Attaching
RESET switch
Remote control sensor
Setting Time
1
Press and hold YSETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select GENERAL, and then
press ENTER.
3
Turn the Rotary encoder to select the CLOCK ADJ mode,
and then press ENTER.
The time indication will blink.
Notes
• Before attaching the front panel, make sure that there is no dirt or dust
on the connector terminals and no foreign object between the front
panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time,
after changing the car battery, etc.
Adjusting Volume
Turn the Rotary encoder until the desired sound is
obtained.
Setting the Dimmer Control (CDE-193BT only)
4
Turn the Rotary encoder to adjust the hours while the
time indication is blinking.
5
When the hour has been adjusted, press ENTER.
6
Turn the Rotary encoder to adjust the minutes while the
time indication is blinking.
7
Press and hold YSETUP for at least 2 seconds to return
to normal mode.
Notes
• To synchronise the clock to another clock/watch or radio time
announcement, press and hold ENTER for at least 2 seconds after
setting the “hour”. Minutes will reset to “00”. If the display shows over
“30” minutes when you do this, the time will advance one hour.
• Even when AUTO CLOCK is set to ON (refer to “Setting the Time to
automatically be adjusted” on page 27), the time can be adjusted
manually. At the same time, if there is an adjustment request from RDS,
the time will be adjusted automatically by RDS data.
•Pressing t will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer.
Point the optional remote control transmitter at the remote control
sensor.
Press and hold DIM. for at least 2 seconds repeatedly to
select the DIMMER mode.
DIMMERAUTO DIMMER ON DIMMER OFF DIMMERAUTO
DIMMERAUTO mode:
Decrease the illumination bri ghtness of the unit’s buttons with the
head lights of the vehicle ON. This mode decreases the unit’s
backlighting in sync with headlight usage.
DIMMER ON mode:
Keep the illumination brightness of the backlighting dimmed.
DIMMER OFF mode:
Keep the illumination brightness of the backlighting bright.
Note
• The setting items are the same as DISPLAY setting in SETUP mode.
For details, refer to “Dimmer Control” on page 29.
10-EN
Connectable to Remote Control Interface Box
With an optional Alpine Steering Wheel Remote Control Interface
Box (not included), this unit is controllable from the vehicles
steering wheel controls. For details, contact your Alpine dealer.
Radio
/SOURCE
BAND
Rotary encoder
/ENTER
TUNE/A.ME
Preset buttons
(1 through 6)
Presetting Stations Automatically
1
Press BAND repeatedly until the desired radio band is
displayed.
2
Press and hold TUNEA.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will automatically
seek and store 6 strong stations in the selected band. They will
be stored into preset buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
Note
• If no stations are stored, the tuner will return to the original station you
were listening to before the auto memory procedure began.
Tuning to Preset Stations
Listening to Radio
1
Press VSOURCE to select TUNER mode.
2
Press BAND repeatedly until the desired radio band is
displayed.
F(M)1 F(M)2 F(M)3 MW LW F(M)1
3
Press TUNEA.ME to select the tuning mode.
SEEK DX (Distance mode) SEEK LOCAL (Local mode)
MANUAL (Manual mode) SEEK DX
Note
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press or to tune in the desired station.
Holding down or in Manual mode will change the
frequency continuously.
Presetting Stations Manually
Select the band, and then press any one of the station
preset buttons (1 through 6) that has your desired radio
station in memory.
The display shows the band, preset number and frequency of
the station selected.
Frequency Search Function
You can search for a radio station by its frequency.
1
Press ENTER in Radio mode to activate Frequency
search mode.
2
Turn the Rotary encoder to select the desired frequency.
3
Press ENTER to receive the selected frequency.
Note
•Press t in the search mode to cancel. Or, the search mode will be
cancelled if no operation is performed for 60 seconds.
While receiving the station that you want to store, press
and hold, for at least 2 seconds, any one of the preset
buttons (1 through 6) into which you wish to store the
station.
The display shows the band, preset number and station
frequency memorized.
Notes
• A total of 30 stations can be stored in the preset memory (6 stations for
each band; F(M)1, F(M)2, F(M)3, MW and LW).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
11-EN
RDS
/SETUP
/ENTER/OPTION
VIEW
BAND/TA
Rotary encoder
Turning AF (Alternative Frequencies) ON/OFF
The RDS (Radio Data System) is a radio information system using the
57 kHz subcarrier of regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1
Press and hold YSETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select the TUNER mode, and
then press ENTER.
3
Turn the Rotary encoder to select the “AF”, and then press
ENTER.
4
Turn the Rotary encoder to select the AF (Alternative
Frequency) ON or OFF mode.
5
Press and hold YSETUP for at least 2 seconds to return
to normal mode.
Notes
• When the AF ON mode is selected, the unit automatically tunes to a
strong signal station in the AF list.
• Use the AF OFF mode when automatic re-tuning is not required.
The RDS digital data includes the following:
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
TP Traffic Programme
TA Traffic Announcement
PTY Programme Type
EON Enhanced Other Networks
Receiving RDS Regional (Local) Stations
1
Press and hold YSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the TUNER mode, and
then press ENTER.
3
Turn the Rotary encoder to select the REGIONAL mode,
and then press ENTER.
4
Turn the Rotary encoder to select ON or OFF.
In the OFF mode, the unit automatically keeps receiving the
related local RDS station.
5
Press and hold YSETUP for at least 2 seconds to return
to normal mode.
Notes
•Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
PI SEEK Setting
1
Press and hold YSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the TUNER mode, and
then press ENTER.
3
Turn the Rotary encoder to select the PI SEEK mode, and
then press ENTER.
4
Turn the Rotary encoder to select ON or OFF.
5
Press and hold YSETUP for at least 2 seconds to return
to normal mode.
Notes
•Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Receiving Traffic Information
1
Press and hold BANDTA for at least 2 seconds so that the
“G” indicator lights up.
2
Press or to select your desired traffic information
station.
When a traffic information station is tuned in, the “T”
indicator lights up.
Traffic information is heard only when it is being broadcast. If
traffic information is not being broadcast, the unit is set in the
standby mode. When a traffic information broadcast begins, the
unit automatically receives it and the display shows “TRF-INFO”
and PS information.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
12-EN
Notes
• If the traffic information broadcast signal falls below a cer tain level, the
unit remains in the receiving mode for 1 minute. If the signal remains
below a certain level for over 1 minute, the “G” indicator blinks.
• If you do not want to listen to the traffic information being received,
lightly press or to skip that traffic information message. The
TA mode will remain in the ON position to receive the next traffic
information message.
• If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorized.
• In the TA mode, the SEEK tuning selects only the TP stations.
PTY (Programme Type) Tuning
1
Press and hold ENTEROPTION for at least 2 seconds
to activate the Option menu while the unit is in Radio (FM
receiving) mode.
2
Turn the Rotary encoder to select the PTY SELECT, then
press ENTER.
3
Turn the Rotary encoder to choose the desired
programme type while the PTY (programme type) is being
displayed.
4
Press ENTER after selecting the programme type to
start searching for a station in the selected programme
type.
The chosen programme type display blinks during searching
and lights when a station is found.
If no PTY station is found (except the current station), “NO PT Y”
will be displayed for a few seconds.
3
Press and hold BANDTA for at least 2 seconds to
deactivate the Traffic Information mode.
The “G” indicator goes out.
Displaying Radio Text
Text messages from a radio station can be displayed.
Press VIEW while receiving FM in the radio mode to select
the Radio Text display.
The display will change every time the button is pressed.
For details, refer to “Displaying the Text” on page 24.
5
Press and hold ENTEROPTION for at least 2 seconds
to return to normal mode.
Receiving Traffic Information While Playing USB Audio or Radio
1
Press and hold BANDTA for at least 2 seconds so that the
“G” indicator lights up.
2
Press or to select a traffic information station if
necessary.
When a traffic information broadcast starts, the unit
automatically mutes the audio source (such as CD, regular FM
broadcast, USB AUDIO, etc.).
When the traffic information broadcast finishes, the unit
automatically returns to the original source play before the
traffic information broadcast began.
When traffic information stations cannot be received:
In other audio source mode:
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
Note
• The receiver is equipped with the EON (Enhanced Other Networks)
function in order to keep track of additional alternate frequencies to
the AF list. If the station being received does not broadcast the traffic
information, the receiver automatically tunes in the related station that
broadcasts the traffic information when it occurs.
13-EN
CD/MP3/WMA/AAC
/ENTER
4
5
/SOURCE
Rotary encoder
Preset buttons
(1 through 6)
(CDE-193BT only)
Repeat and Random Play
1
During playback, Press z 4 or 5 x repeatedly until the
setting appears.
RPT ONE:
Track/file is played back repeatedly.
RPT FOLDER
MIX FOLDER
MIX ALL:
* When MP3/WMA/AAC files are played back.
2
To cancel repeat or M.I.X. play, select (OFF) with the above
procedure.
Notes
• a indicator lights up during repeat play mode.
• s indicator lights up during random play mode.
*
Files in a folder are played back repeatedly.
Files in a folder are played back randomly.
All files in the disc or USB Memory are played back randomly.
:
*
:
Searching for CD Text
Playback
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Note
• When a disc is already inserted, press VSOURCE to switch to the
DISC mode.
2
While playing back MP3/WMA/AAC, press or to select
the desired folder.
3
Press or to select the desired track (file).
Pressing and holding or will fast backward/fast
forward track continuously.
4
To pause playback, press .
Pressing again will resume playback.
5
To eject the disc, press .
Notes
• Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
• Three-inch (8 cm) CDs cannot be used.
• Any file protected by DRM (Digital Rights Management) copy
• The track display for MP3/WMA/AAC data playback is the file
• The playback time may not be correctly displayed when a VBR
• This unit does not support FLAC format disc’s playback.
14-EN
protection, cannot be played back on this unit.
numbers recorded on the disc.
(Variable Bit Rate) recorded file is played back.
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made using
the track numbers associated with each song.
1
Press ENTER during play.
2
Turn the Rotary encoder to select the desired track, and
then press ENTER.
This will play the selected track.
Notes
•Press any of the preset buttons (1 through 6) during a search to skip
over a calculated percentage of tracks. For details, refer to “Direct
Search Function” on page 39.
•Press t in the search mode to cancel. Or, the search mode is cancelled
if no operation is performed for 60 seconds.
• When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be cancelled.
Folder/File Name Search (concerning MP3/WMA/AAC)
Folder and file names may be searched and displayed during playback.
Folder Name Search mode
1
During MP3/WMA/AAC playback, press ENTER to
activate the search mode.
2
Turn the Rotary encoder to select Folder Name Search
mode, and then press ENTER.
3
Turn the Rotary encoder to select the desired folder.
4
Press and hold ENTER for at least 2 seconds to play
back the first file in the selected folder.
Notes
•Press any of the preset buttons (1 through 6) during a Folder Name
search to skip over a calculated percentage of folders. For details, refer to
“Direct Search Function” on page 39.
•Press t in the search mode to return to the previous mode.
Or, the search mode is cancelled if no operation is performed for
60 seconds.
• To search for files in the Folder Name Search mode, press ENTER.
Files in the folder may be searched.
• The root folder is displayed as “\ROOT”.
• When Folder Name Search is made during M.I.X. play, the M.I.X. play
mode will be cancelled.
File Name Search mode
1
During MP3/WMA/AAC playback, press ENTER to
activate the search mode.
2
Turn the Rotary encoder to s elect Fi le Name Search mode,
and then press ENTER.
3
Select the desired file by turning the Rotary encoder.
4
Press ENTER to play back the selected file.
Notes
•Press any of the preset buttons (1 through 6) during a File Name
search to skip over a calculated percentage of files. For details, refer to
“Direct Search Function” on page 39.
•Press t in the search mode to return to the previous mode.
Or, the search mode is cancelled if no operation is performed for
60 seconds.
• When File Name Search is made during M.I.X. play, the M.I.X. play
mode will be cancelled.
Search Position Memory
During playback, you can quickly return to the last-selected hierarchy
level in the search mode.
Press t.
The hierarchy you selected last in the search mode is displayed.
About MP3/WMA/AAC
CAUTION
Except for private use, duplicating audio data (including MP3/
WMA/AAC data) or distributing, transferring, or copying it,
whether for free or for a fee, without permission of the copyright
holder is strictly prohibited by the Copyright Act and by
international treaty.
What is MP3?
MP3, whose official name is “MPEG Audio Layer 3,” is a compression
standard prescribed by the ISO, the International Standardization
Organization and MPEG which is a joint activity institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is capable of
compressing audio data at extremely high ratios, reducing the size of
music files to as much as one -tenth their original size. This is achieved
while still maintaining near CD quality. The MP3 format realises such
high compression ratios by eliminating the sounds that are either
inaudible to the human ear or masked by other sounds.
What is WMA?
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data.
What is AAC ?
AAC is the abbreviation for “Advanced Audio Coding,” and is a basic
format of audio compression used by MPEG2 or MPEG4.
Method for creating MP3/WMA/AAC files
Audio data is compressed using software with MP3/WMA/AAC codecs.
For details on creating MP3/WMA/AAC files, refer to the user’s manual
for that software.
MP3/WMA/AAC files that are playable on this device have the file
extensions “mp3” / “wma” / “m4a”. Files with no extension cannot be
played back (WMA ver. 7.1, 8 and 9 are supported). Protected files are
not supported, neither are raw AAC files (using the “.aac” extension).
There are many different versions of the AAC format. Confirm that the
software being used conforms to the acceptable formats listed above.
It’s possible that the format may be unplayable even though the
extension is valid.
Playback of AAC files encoded by iTunes is supported.
Supported playback sampling rates and bit rates
MP3
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
Bit rates: 8 - 320 kbps
WMA
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz
Bit rates: 32 - 192 kbps
AAC
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
Bit rates: 16 - 320 kbps
This device may not play back correc tly depending on sampling rates.
ID3 tags/WMA tags
This device supports ID3 tag v1 and v2, and WMA tag.
If tag data is in an MP3/WMA/AAC file, this device can display the title
(track title), artist name, and album name ID3 tag/WMA tag data.
This device can only display single-byte alphanumeric characters (up to
30 for ID3 tags and up to 15 for WMA tags) and the underscore. For
non-supported characters, “NO SUPPORT ” is displayed or the character
is displayed as space.
If information contains characters other than ID3 tag information, the
audio file may not be played back.
The tag information may not be correctly displayed, depending on the
contents.
Producing MP3/WMA/AAC discs
MP3/WMA/AAC files are prepared, then written to a CD-R or CD-RW
using CD-R writing software. A disc can hold up to 509 files/255 folders.
Playback may not be performed if a disc exceeds the limitations
described above.
Media supported
The media that this device can play back are CD-ROMs, CD-Rs, and
CD-RWs.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or Level 2.
Under the ISO9660 standard, there are some restrictions to remember.
The maximum nested folder depth is 8 (including the root director y).
The number of characters for a folder/file name is limited.
Valid characters for folder/file names are letters A-Z (all caps), numbers
0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, Romeo, etc., and other
standards that conform to ISO9660. However, sometimes the file
names, folder names, etc., are not displayed correctly.
Formats supported
This device suppor ts CD-ROM XA, Mixed Mode CD, Enhanced CD
(CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with Track At
Once or packet writin g.
12 kHz, 11.025 kHz, 8 kHz
12 kHz, 11.025 kHz, 8 kHz
15-EN
Loading...