Alpine CDA-9805, CDA-9807 User Manual

R

FM/AM CD Receiver

CDA-9807

FM/AM CD Receiver

CDA-9805

R

EN

FR

ES

• OWNER'S MANUAL

• MODE D'EMPLOI

• MANUAL DE OPERACIÓN

ALPINE ELECTRONICS MARKETING, INC.

1-1-8 Nishi Gotanda,

Shinagawa-ku,

Tokyo 141-0031, Japan

Phone [phone]

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

Phone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF CANADA, INC.

7300 Warden Ave., Suite 203, Markham,

Ontario L3R 9Z6, Canada

Phone 1-800-ALPINE-1 (1-800-257-4631)

Melyi Printing Factory, Dalian, China
No. 28 Chang Qing Street, Xl Gang District, Dalian, China

Please read before using this equipment.

Veuillez lire avant d'utiliser cet appareil.

Léalo antes de utilizar este equipo.

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

6-8 Fiveways Boulevarde Keysborough,

Victoria 3173, Australia

Phone [phone]

ALPINE ELECTRONICS GmbH

Kreuzerkamp 7,

40878 Ratingen, Germany

Phone [phone]

ALPINE ELECTRONICS OF U.K. LTD.

Fletchamstead Highway, Coventry CV4 9TW, U.K.

Alpine House

Phone [phone]

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,

B.P. 50016, 95945 Roissy Charles de Gaulle

Viale C. Colombo 8, 20090 Trezzano Sul

ALPINE ELECTRONICS DE ESPAÑA, S.A.

Portal de Gamarra 36, Pabellón, 32

01013 Vitoria (Alava)-APDO 133, Spain

Cedex, France

Phone [phone]

ALPINE ITALIA S.p.A.

Naviglio (MI), Italy
Phone [phone]

Phone [phone]

Designed by ALPINE Japan

Printed in China (Y)

68P02294K49-A

ES

IT

SE

CHM-S630CHA-S634

• CD changer for CDA-9807/CDA-9805.

•

Changeur CD pour CDA-9807/CDA-9805.

• Cambiador de CD para CDA-9807/
CDA-9805.

CHA-1214

• CD changer for CDA-9807/CDA-9805.

•

Changeur CD pour CDA-9807/CDA-9805.

• Cambiador de CD para CDA-9807/
CDA-9805.

Alpine CD Changers Give You More!

More musical selections, more versatility, more convenience.

The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW PLAY BACK, MP3
PLAY BACK and CD TEXT. The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S630 M-Bus
model is a super-compact 6-disc changer with a CD-R/RW PLAY BACK.

Changeurs de CD Alpine : vous avez le choix!

Plus de sélections musicales, plus de souplesse, plus de confort.

Le modèle CHA-S634 est un changeur 6 disques ultra performant équipé des nouvelles fonctions M DAC,
CD-R/RW PLAY BACK, MP3 PLAY BACK et CD TEXT. Le modèle CHA-1214 Ai-NET contient 12
disques. Le modèle CHM-S630 M-Bus est un changeur 6 disques super compact doté de la fonction CD-R/
RW PLAY BACK.

¡Los cambiadores Alpine de CD le ofrecen más!

Más selecciones musicales, más versatilidad y más ventajas.

CHA-S634 es un cambiador de seis discos de alto rendimiento con nuevo M DAC, CD-R/RW PLAY BACK,
MP3 PLAY BACK y CD TEXT. El modelo CHA-1214 Ai-NET alberga 12 discos y el modelo CHM-S630
M-Bus es un cambiador de seis discos de tamaño reducido con un CD-R/RW PLAY BACK.

Contents

Operating Instructions

WARNING

WARNING.................................................. 3

CAUTION ................................................... 3

PRECAUTIONS ......................................... 3

Basic Operation

Detaching the Front Panel ................................. 5

Attaching the Front Panel ................................. 5

Initial System Start-Up ..................................... 5

Turning Power On and Off ............................... 5

Adjusting Volume/Balance (Between Left and

Right)/Fader (Between Front and Rear)/

Defeat ............................................................ 6

Audio Mute Function ........................................ 6

Displaying Time................................................ 6

Setting Time ...................................................... 6

Setting the Bass Control ................................... 7

Setting the Treble Control ................................. 7

Setting the Bass Type ........................................ 7

Setting the MX Mode ....................................... 8

Blackout Mode On and Off............................... 8

Displaying the Title/Text ................................... 9

Titling Discs/Stations ...................................... 10

Erasing Disc Title/Station Title ....................... 10

SETUP Operation

Subwoofer On and Off .................................... 11

Scroll Setting ................................................... 11

Turning Mute Mode On/Off ............................ 12

Setting the External Input Defeat Mode

Setting the AUX Mode (V-Link) ..................... 12

Connecting to an External Amplifier .............. 13

...........

Radio Operation

Changing the Radio Frequencies for each

Country ........................................................ 14

Manual Tuning ................................................ 14

Automatic Seek Tuning .................................. 14

Manual Storing of Station Presets .................. 14

Automatic Memory of Station Presets ............ 15

Tuning to Preset Stations ................................ 15

Station Title Search Function.......................... 15

Quick Search Function .................................... 15

CD Player Operation

Inserting/Ejecting Disc ................................... 16

Normal Play and Pause ................................... 16

Music Sensor (Skip) ........................................ 17

Fast Forward and Backward ........................... 17

Repeat Play ..................................................... 17

M.I.X. (Random Play) .................................... 17

Scanning Programs ......................................... 18

Track Search Function .................................... 18

Quick Search Function .................................... 18

Controlling CD Changer (Optional) ............... 18

Multi-Changer Selection ................................. 19

MP3/WMA Operation

Playing MP3/WMA Files (CDA-9807 only) .. 20

Playing MP3 Files with the CD Changer

(Optional) .................................................... 20

Music Sensor (Skip) ........................................ 20

Fast Forward and Backward ........................... 20

Repeat Play ..................................................... 20

M.I.X. (Random Play) .................................... 21

12

Scanning files .................................................. 21

Folder/File Search Function ............................ 21

Quick Search Function .................................... 21

Playing MP3 Data ........................................... 21

ENGLISH

Windows Media, and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and / or other countries.

1-EN

XM Radio Operation (Optional)

Receiving XM Channels with the XM Receiver

(Optional) .................................................... 22

Checking the XM Radio ID Number .............. 22

Storing XM Channel Presets ........................... 22

Receiving Stored XM Channels...................... 22

Channel/Category Search Function ................ 23

Quick Search Function .................................... 23

Changing the Display...................................... 23

Setting the tuning method ............................... 23

Setting the Auxiliary Data Field Display ........ 23

MobileHub™Link Operation
(Optional)

About MobileHub™ Link............................... 24

Telephone Mode ON/OFF .............................. 24

Incoming Calls ................................................ 24

Calling

Calling by the address book ........................ 25

Calling by using the Speed Dial .................. 25

Calling by the outgoing/incoming/absent/

incoming history ...................................... 25

SMS (Short Message Service) Operation

Receiving a short message........................... 25

Installation and Connections

Warning ........................................................... 34

Caution ............................................................ 34

Precautions ...................................................... 34

Installation ...................................................... 35

Connections .................................................... 36

LIMITED WARRANTY

Remote Control Operation

Controls on Remote Control

(CDA-9807 only)......................................... 26

Battery Replacement (CDA-9807 only) ......... 27

Information

About MP3/WMA .......................................... 28

In Case of Difficulty ....................................... 30

Specifications .................................................. 33

2-EN

WARNING

WARNING

This symbol means important instructions. Failure
to heed them can result in serious injury or death.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR
VEHICLE.

Any function that requires your prolonged attention should only
be performed after coming to a complete stop. Always stop the
vehicle in a safe location before performing these functions.
Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

CAUTION

This symbol means important instructions. Failure
to heed them can result in injury or material
property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.

DO NOT MIX NEW BATTERIES WITH OLD BATTERIES.
INSERT WITH THE CORRECT BATTERY POLARITY.

When inserting the batteries, be sure to observe proper polarity (+
and –) as instructed. Rupture or chemical leakage from the
battery may cause fire or personal injury.

PRECAUTIONS

Temperature

Be sure the temperature inside the vehicle is between +60°C
(+140°F) and –10°C (+14°F) before turning your unit on.

Moisture Condensation

You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player
and wait about an hour for the moisture to evaporate.

Damaged Disc

Do not attempt to play cracked, warped, or damaged discs.
Playing a bad disc could severely damage the playback
mechanism.

Maintenance

If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire,
electric shock or other injury.

DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS
IN INSERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the product.

3-EN

WARNING

PRECAUTIONS

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into
the player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power
is off.

Inserting Discs

Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
Your player will automatically eject any disc that is inserted
incorrectly. If the player continues to eject a correctly inserted
disc, push the RESET switch with a pointed object such as a
ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.

New Discs

As a protective measure to prevent the CD from jamming, the CD
player will automatically eject discs with irregular surfaces or
inserted incorrectly. When a new disc is inserted into the player
and ejected after initial loading, using your finger, feel around the
inside of the centre hole and outside edge of the disc. If you feel
any small bumps or irregularities, this could inhibit proper
loading of the disc. To remove the bumps, rub the inside edge of
the hole and outside edge of the disc with a ballpoint pen or other
such instrument, then insert the disc again.

Center Hole

Center Hole

New
Disc

Correct Handling

Do not drop the disc while handling. Hold the disc so you will
not leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.

CORRECT

INCORRECT

CORRECT

Disc Cleaning

Fingerprints, dust, or soil on the surface of the disc could cause
the CD player to skip. For routine cleaning, wipe the playing
surface with a clean, soft cloth from the centre of the disc to the
outer edge. If the surface is heavily soiled, dampen a clean, soft
cloth in a solution of mild neutral detergent before cleaning the
disc.

Disc Accessories

There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness and/or
diameter of the disc. Using such accessories can cause the disc to
be out of standard specifications and may create operational
problems. We recommend not using these accessories on discs
played in Alpine CD players.

Bumps

Outside
(Bumps)

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use
any special shape discs.
Use of special shape discs may cause damage to the mechanism.

Installation Location

Make sure the CDA-9807/CDA-9805 will not be installed in a
location subjected to:

• Direct sun and heat

• High humidity and water

• Excessive dust

• Excessive vibrations

4-EN

Disc StabilizerTransparent Sheet

Basic Operation

1

SOURCE/POWER

Initial System Start-Up

Be sure to press the RESET switch when using the unit
for the first time, after installing the CD changer, etc., or
after changing the car battery.

To do this, first, remove the detachable front panel. Behind
the front panel, to the right of the connector, there is a small
hole. Using a ball-point pen or other pointed object, press
the RESET switch mounted behind this hole to complete
the initialization procedure.

1

Detaching the Front Panel

1 Press and hold the SOURCE/POWER button for more

than 3 seconds to turn off the power.

2 Press the (Release) button at upper left side until

the front panel pops out.

3 Grasp the left side of the front panel and pull it out.

NOTES

• The front panel may become hot in normal usage (especially

the connector terminals on the back of the front panel.) This is
not a malfunction.

• To protect the front panel, place it in the supplied carrying

case.

Attaching the Front Panel

1 First, insert the right side of the front panel into the

main unit. Align the groove on the front panel with the
projections on the main unit.

2 Push the left side of the front panel until it locks firmly

into the main unit.

RESET switch

Turning Power On and Off

1 Press the SOURCE/POWER button to turn on the unit.

NOTE

The unit can be turned on by pressing any other button except
the eject c and DISP/TITLE

The volume level gradually increases to the previous
level you were listening to before the unit was turned
off. Press and hold the SOURCE/POWER button for at
least 3 seconds to turn off the unit.

NOTE

The first time power is turned on, the volume will start from level

12.

button.

2

1

NOTES

• Before attaching the front panel, make sure that there is no

dirt or dust on the connector terminals and no foreign object
between the front panel and the main unit.

• Attaching the front panel carefully, holding the sides of the

front panel to avoid pushing buttons by mistake.

5-EN

Basic Operation

Displaying Time

MODE/Rotary encoder

MUTE

DISP/TITLE

g

BAND/TEL.

f

CENTER f

Adjusting Volume/Balance (Between
Left and Right)/Fader (Between Front
and Rear)/Defeat

1 Press the MODE (Rotary encoder) repeatedly to

choose the desired mode.

Each press changes the modes as follows:

→ BALANCE → FADER → DEFEAT

SUBWOOFER*← VOLUME ←

Volume : 0 ~ 35
Balance : L15 ~ R15
Fader: R15 ~ F15
Subwoofer: 0 ~ +15

NOTES

• If the MODE (Rotary encoder) is not pressed within 5

seconds after selecting the BALANCE, FADER, DEFEAT or
SUBWOOFER mode, the unit automatically returns to the
VOLUME mode.

• *When the subwoofer mode is OFF, its level cannot be

adjusted.

1 Press the DISP/TITLE button repeatedly until the

time is displayed.

Each press changes the modes as follows:

Radio mode

→

Radio frequency

CD Player/Changer modes

Playing time

→

mode

TITLE mode

NOTES

• Selecting any tuner or CD function while in the clock priority

mode will interrupt the time display momentarily. The
function selected will be displayed for about 5 seconds before
the time returns to the display.

• When the power is off but the ignition key is on, press the

DISP/TITLE button to display the time.

•∗ For CDA-9805 model, the display above is shown with a

CD-TEXT compatible changer connected.

Clock priority

→ →

mode

Clock priority

→→

mode

TRACK

←

TEXT mode

TITLE mode

DISC TEXT
mode

*

←

*

Setting Time

1 In the Clock priority mode, press and hold the DISP/

TITLE button for at least 3 seconds while the time is

displayed. The time indication will blink.

2 Turn the Rotary encoder to adjust the hours while the

time indication is blinking.

3 When the hour has been adjusted, press the Rotary

encoder.

2 Turn the MODE (Rotary encoder) until the desired

sound is obtained in each mode.
By setting Defeat ON, previously adjusted settings of
BASS, TREBLE will return to the factory defaults, but
MX will be turned off.

NOTE

Depending on the connected devices, some functions and display
indications do not work.

Audio Mute Function

Activating this function will instantly lower the volume
level by 20 dB.

1 Press the MUTE button to activate the MUTE mode.

The audio level will decrease by about
20 dB.
Pressing the MUTE button again will bring the audio
back to its previous level.

6-EN

4 Turn the Rotary encoder to adjust the minutes while

the time indication is blinking. The time is automatically
set 5 seconds after the minute adjustment. The time
can also be manually set by pressing the Rotary

encoder.

Setting the Bass Control

Setting the Treble Control

You can change the Bass Frequency emphasis to
create your own tonal preference.

1 Press the CENTER f button to select the BASS (bass

Center frequency) control mode.

→ BASS → TREBLE → normal mode

2-1 *Setting the Bass Center Frequency:

Press the g or f button to select the desired
bass center frequency.

→ 60Hz ↔ 80Hz ↔ 100Hz ↔ 200Hz ←

Emphasizes the displayed bass frequency ranges.

2-2 *Setting the Bass Band width (Q-Factor):

Press the BAND/TEL. button to select the desired
bass Band Width.

→ B. Width1 → B. Width2 → B. Width3 → B. Width4

(Narrow) ←................................... → (Wide)

Changes the bass boost band width to wide or narrow.
A wide setting will boost a wide range of frequencies
above and below the center frequency. A narrower
setting will boost only frequencies near the center
frequency.

2-3 Setting the bass Level:

Turn the Rotary encoder to select the desired bass
level (–7~+7).
You can emphasize or weaken the bass frequency.

NOTES

• If no buttons are pressed within 15 seconds, the bass control

setting will be turned off automatically.

• The Bass Level settings will be individually memorized for

each source (FM, AM, XM, CD, etc.) until the setting is
changed. The Bass frequency and Bass Band Width settings
adjusted for one source are effective for all other sources
(FM, AM, XM, CD etc.).

• Depending on the connected devices, some functions and

display indications do not work. However, Bass Level is still
adjustable if an audio processor with the Bass function is
connected.

• This function is inoperable when DEFEAT is ON.
* Selecting any of the "Setting the Bass Types" (TYPE 1 through

3), temporarily replaces the custom settings you have made
above.

You can change the Treble Frequency emphasis to
create your own tonal preference.

1 Press the CENTER f button to select the TREBLE

(treble Center frequency) control mode.

→ BASS → TREBLE → normal mode

2-1Setting the treble Center frequency:

Press g or f button to select the desired treble
Center frequency.

→ 10.0kHz ↔ 12.5kHz ↔ 15.0kHz ↔ 17.5kHz

Emphasizes the displayed Treble frequency ranges.

←

2-2 Setting the treble Level:

Turn the Rotary encoder to select the desired Treble
Level (–7~+7).
You can emphasize the treble frequency.

NOTES

• If no buttons are pressed within 15 seconds, the Treble control

setting will be turned off automatically.

• The Treble Level settings will be individually memorized for

each source (FM, AM, XM, CD, etc.) until the setting is
changed. The Treble frequency settings adjusted for one
source are effective for all other sources (FM, AM, XM, CD,
etc.).

• Depending on the connected devices, some functions and

display indications do not work. However, Treble Level is still
adjustable if an audio processor with the Treble function is
connected.

• This function is inoperable when DEFEAT is ON.

Setting the Bass Type

This function allows for 3 different Bass Type settings.
Select the one that appeals to you the most.

1 Press and hold the CENTER f button for at least 2

seconds to set the Bass Type.

2 Select the desired Type (1 through 3) by pressing the

g or f button within 15 seconds.

Type 1 will sound best if you have a subwoofer in your
system. Use Type 2 or 3 if you are using small diameter
speakers.

3 Press and hold the CENTER f button for at least 2

seconds to return to the normal mode.

NOTES

• “Bass Center Frequency” and “Bass Band width” previously

set are replaced when selecting TYPE 1 through 3. When Bass
Type is OFF, your previous settings are restored.

• Bass Type is not selectable when connected to an external

audio processor.

7-EN

Basic Operation

B. OUT

Rotary encoder

DISP/TITLE

SOURCE/POWER

MX

Setting the MX Mode

MX (Media Xpander) makes vocals or instruments
sound distinct regardless of the music source. The radio,
CD, and MP3, will be able to reproduce the music
clearly even in cars with a lot of road noise.

5 After setting, press the Rotary encoder to return to the

normal mode.

NOTES

• By "Setting the External Input Defeat Mode" (page 12) to ON,

operation is bypassed.

• To cancel MX mode for all music sources, press the MX

button to turn MX off.

• MX mode is automatically canceled if no buttons are pressed

within 15 seconds.

• Each music source, such as radio, CD, and MP3 can have its

own MX setting.

• On disks with both MP3 and CD-DA, when the source

changes from “MP3 to CD-DA” or “CD-DA to MP3”, the
MX-mode switching process may delay playback slightly.

• Setting to MX OFF makes MX mode of each music source

OFF.

• This function is inoperable when DEFEAT is ON.

• MX mode does not function when MX is ON for AM radio.

• If the unit is connected to an audio processor with the MX

function, such as PXA-H700, etc., the MX processing can be
applied to the audio processor. In this case the audio
processor needs to be adjusted. For details, refer to the
Owner’s Manual of the audio processor.

1 Press the MX button to select MX ON.
2 Press the SOURCE/POWER button to select the

source you want to MX (Media Xpander)-correct.

3 Press and hold the MX button for at least 2 seconds to

select the MX mode.

4 Turn the Rotary encoder to select your preferred

mode or OFF.

FM (MX level 1 to 3):
The medium to high frequencies become more clear,
and produces well balanced sound in all the bands.
CD (MX level 1 to 3):
CD mode processes a large quantity of data. This data
is used to reproduce the sound cleanly by making use
of the data quantity.
MP3/WMA/XM (MX level 1 to 3):
This corrects information that was omitted at the time
of compression. This reproduces a well-balanced
sound close to the original.
DVD (or Video CD):

• (MOVIE MX level 1 to 2)

The dialog portion of the video is reproduced more
clearly.

• (MUSIC MX level 1):

This disk contains a large quantity of data such as
music clip. MX uses this data to reproduce the sound

accurately.
AUX (MX level 1):
Choose the MX mode (MP3, MUSIC, or MOVIE) that
corresponds to the media connected.
If two external devices are connected, the MX mode of
each media can be selected.

Blackout Mode On and Off

When the Blackout mode is turned on, the display will
turn off to reduce power consumption.
This additional power enhances the sound quality.

1 Press and hold the B.OUT button for at least 3

seconds to start the blackout mode. By doing so the
display will turn off.

NOTE

If any button on the unit is pressed during the blackout mode, the
function will be displayed for 5 seconds to show the operation
before returning to Blackout mode.

To cancel the blackout mode, press and hold the
B.OUT button for at least 3 seconds.

8-EN

Displaying the Title/Text

It is possible to display the CD/Station title if the title has
been previously inputted. For details, see “Titling Disc/
Stations” (page 10). Text information, such as the disc
name and the track name, will be displayed if playing a
CD text compatible disc. It is also possible to display the
folder name, the file name, and the tag, etc. while playing
MP3/WMA files.

1 Press the DISP/TITLE button.

The mode will change every time the button is
pressed.

About “Title” and “Text”
Title: With this device, it is possible to input the CD/

Station name (refer to page 10). This inputted name
is referred to as a “title.”
You cannot input or display titles on MP3/WMA
discs.

Text: Text compatible CDs contain text information such

as the disc name and track name. Such text
information is referred to as “text.”

Radio mode:

FREQUENCY DISPLAY

CD mode: (Text is displayed for the CDA-9805 model
when a compatible changer with CD text is connected.)

ELAPSED TIME DISPLAY

TEXT DISPLAY (DISC NAME)

TEXT DISPLAY (TRACK NAME)

↓

↓

CLOCK DISPLAY

↓

TITLE DISPLAY

↓

↓

CLOCK DISPLAY

↓

↓

↓

TITLE DISPLAY

∗2

∗1

∗1

∗2

MP3/WMA mode: (MP3 files can be played back with
the CDA-9805 model if an MP3 compatible changer is
connected.)

FILE/ELAPSED TIME DISPLAY

FOLDER NO./FILE NO. DISPLAY

FOLDER NAME DISPLAY

TRACK NAME DISPLAY

ARTIST NAME DISPLAY

ALBUM NAME DISPLAY

∗1

Displayed during playback of a disc with CD Text.

↓

↓

↓

CLOCK DISPLAY

↓

↓

FILE NAME DISPLAY

↓

↓

↓

↓

FRAME DISPLAY

∗3

∗4

ID3 tag/
WMA tag

“ NO TEXT” will be displayed when the CD contains

no Text data.
Text cannot be displayed for the CDA-9805 model.

∗2

If the title was not previously input, “NO TITLE” is
displayed.

∗3

The recording sampling rate and bit rate of the
MP3/WMA file are displayed.

∗4

If an MP3/WMA file contains ID3 tag/WMA tag
information, all the ID3 tag/WMA tag information is
displayed.(e.g., track name, artist name, and album
name). All other tag data is ignored.
“NO DATA” will be displayed if an MP3/WMA file
contains no ID3 tag/WMA tag information.

NOTES

• Some characters may not be displayed correctly with this

device, depending on the character type.

• The CD changer must also be CD Text compatible for the Text

information to be displayed.

• When the Scroll Setting (refer to page 11) is set to “SCR

MANU”, press and hold the DISP/TITLE button for at
least 3 seconds to scroll the Text information only once (TEXT
DISPLAY, FOLDER NAME DISPLAY, FILE NAME DISPLAY
or TAG DISPLAY mode).

• "NO SUPRT" is displayed when the desired text information

cannot be displayed on this unit.

9-EN

Basic Operation

:/J

gf

Rotary encoder

DISP/TITLE

6 Press the DISP/TITLE button to record the title.

NOTES

• If you cancel while entering a title, selected characters are

not written.

• You can enter 18 radio station titles and 18 CD titles on this

unit. If you try to store beyond the limit, the display will show
“FULL DATA.” At this point, no more titles can be stored.

• The CD Changer title length or memory capacity varies

depending upon the model being used.

• To input a new title, one of the previously inputted titles must

first be deleted.

• When you want to erase a title, enter the “ ” symbol into

all spaces.

• The operations described in steps 3 to 5 must be made within

10 seconds. The input mode will be canceled if no action is
taken for over 10 seconds.

Titling Discs/Stations

It is possible to title your favorite CD's or radio stations.
You cannot input titles on MP3/WMA discs.

1 Press the DISP/TITLE button and select the title

display mode.
For details, see “Displaying the Title/Text” (page 9).

2 Press and hold the DISP/TITLE button for at least 3

seconds. The first character will blink.

3 Turn the Rotary encoder to select the desired letter/

numeral/symbol available for naming.

4 Press the Rotary encoder to store the first character.

The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next
letter or symbol of your title.

5 Repeat the steps 3 and 4 above to complete the titling.

Pressing the Rotary encoder after entering the 8th
character, automatically stores the title into memory.

When entering a title of less than 8 characters (for
example, 3 character title):
After entering 3 characters to complete your title, the
4th character space will be blinking. Go to step 6 to
complete the title.

Erasing Disc Title/Station Title

1 Press the DISP/TITLE button to select the titling

mode. Then, press and hold for at least 3 seconds.

2 Within 10 seconds press and hold the -/J button for

at least 2 seconds to activate the title scanning mode.
The title in the display will blink.

3 Press the g or f button repeatedly until the title

you want to erase is displayed.

4 Press and hold the -/J button for at least 2 seconds

to erase the title displayed.

5 Press the DISP/TITLE button to cancel the title

erasing mode.

NOTES

• You cannot erase CD-TEXT.

• "NO DATA" is displayed for 2 seconds if the title is not input

in step 2, or if the title is erased in step 4.

10-EN

SETUP Operation

BAND/TEL.

f g

Rotary encoder

F/SETUP

Scroll Setting

This CD player can scroll the disc and track names
recorded on CD-TEXT discs, as well as the text
information of MP3/WMA files, folder names, and tags.
(This function can be used for CDA-9805 model if the
changer compatible with CD-Text is connected).

1 Press and hold the F/SETUP button for at least 3

seconds.

2 Press the f or g button to select

“SCR”(SCROLL).

Subwoofer On and Off

1 Press and hold the F/SETUP button for at least 3

seconds.

2 Press the f or g button to select “SUBW

(Subwoofer).”

3 Press the BAND/TEL. button to toggle mode between

SUBW ON and SUBW OFF.

NOTE

The initial setting at the factory is subwoofer ON.

4 Press the F/SETUP button after setting the SUBW ON.
5 Press the Rotary encoder repeatedly to select the

SUBW mode.

→ SUBW → BALANCE
VOLUME ← DEFEAT ← FADER ←

6 Tu r n Rotary encoder until the desired sound is

obtained in each mode.

NOTES

• "Playing MP3 data" in the "SETUP" mode section is

described in MP3 Operation on page 21.

• Switching the incoming calls of the telephone in the SETUP

mode section is described in “MobileHub™ Link Operation”
on page 24.

• “Checking the XM Radio ID Number,” “Setting the Tuning

Method” and “Setting the Auxiliary Data Field Display” in
the SETUP mode section are described in "XM Radio
Operation" on page 22-23.

• “Changing the Radio Frequencies for each Country” in the

SETUP mode section is described in "Radio Operation" on
page 14.

3 Press the BAND/TEL. button to toggle the mode

between SCR AUTO and MANU.

• SCR AUTO: the CD text information, the text

information of folder and file names, and the tags are
scrolled automatically.

• SCR MANU: the display is scrolled only when a disc is

loaded or when a track is changed, etc.

4 When the setting is completed, press the F/SETUP

button to return to the normal mode.

NOTES

• Initial mode is “SCR MANU.”

• The unit scrolls CD text names, folder names, file names or

tag display. The disc titles input manually (refer to page 10)
cannot be scrolled.

11-EN