Alpine CDA-7969, CDA-7867 User Manual

CDA-7969 CDA-7867

FM/AM CD Player FM/AM CD Receiver

• OWNER'S MANUAL Please read before using this equipment.

• MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil.

ALPINE ELECTRONICS, INC.

Tokyo office: 1-1-8 Nishi Gotanda,

Shinagawa-ku,

Tokyo 141-8501, Japan

Tel.: (03) 3494-1101

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

Tel.: 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF CANADA, INC.

Suite 203, 7300 Warden Ave. Markham,

Ontario L3R 9Z6, Canada

Tel.: 1-800-ALPINE-1 (1-800-257-4631)

• MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo.

DHE

MIN.

F2 F3 F4 F5 F6

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

6-8 Fiveways Boulevarde Keysborough,

Victoria 3173, Australia

Tel.: (03) 9769-0000

ALPINE ELECTRONICS GmbH

Kreuzerkamp 7-11 40878 Ratingen, Germany

Via C. Colombo 8, 20090 Trezzano Sul Naviglio

Tel.: 02102-45 50

ALPINE ITALIA S.p.A.

MI, Italy

Tel.: 02-48 47 81

MAX.

(CDA-7969)

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue De La Belle Etoile, Z.I. Paris Nord Il

B.P. 50016 F-95945, Roissy, Charles De Gaulle

13 Tanners Drive, Blakelands, Milton Keynes

ALPINE ELECTRONICS DE ESPAÑA, S.A.

01013 Vitoria (Alava)-Apdo. 133, Spain

Cedex, France

Tel.: 01-48 63 89 89

ALPINE ELECTRONICS OF U.K., LTD.

MK14 5BU, U.K.

Tel.: 01908-61 15 56

Portal De Gamarra 36, Pabellón 32

Tel.: 34-45-283588

Yamagata Printing Co., Ltd. 2-6-34, Takashima, Nishi-ku, Yokohama, Kanagawa, Japan

Printed in Japan (Y)

68P30540Y32-O

CD changer for CDA-7969/ CDA-7867 Changeur CD pour CDA-7969/ CDA-7867 Cambiador de CD para CDA-7969/ CDA-7867

CHA-S624

CHA-1214

CHM-S620

Alpine CD Changers Give You More!

More musical selections, more versatility, more convenience.

An Alpine CD Changer adds more musical choices to your sound system. All models can be controlled from Alpine head units and deliver excellent sound quality. The CHA-S624 is a high-performance 6-disc changer with a new M DAC, Ai-NET compatibility, Optical Digital Output, 150 Disc Title Memory and CD TEXT. The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S620 M-Bus model is a super-compact 6-disc changer.

Changeurs de CD Alpine : vous avez le choix!

Plus de sélections musicales, plus de souplesse, plus de confort.

Un changeur de CD Alpine permet d'augmenter la plage des sélections musicales de votre système embarqué. Tous les modèles peuvent être contrôlés à partir des autoradios Alpine et offrent une excellente qualité audio. Le modèle CHA-S624 est un changeur 6 disques ultra performant compatible Ai-NET et équipé d'un convertisseur N/A standard, d'une sortie optique numérique, d'une mémoire d'une capacité de 150 titres et de la fonction CD TEXT. Le modèle CHA-1214 Ai-NET peut contenir 12 disques. Le modèle CHM-S620 MBus est un changeur 6 disques super compact.

¡Los cambiadores Alpine de CD le ofrecen más!

Más selecciones musicales, más versatilidad y más ventajas.

Un cambiador Alpine de CD añade más opciones musicales a su equipo de sonido. Todos los modelos pueden controlarse desde las unidades principales de Alpine y proporcionar un sonido de calidad excepcional. El modelo CHA-S624 es un cambiador de 6 discos de alto rendimiento con el nuevo DAC "M" y compatibilidad con Ai-NET, salida digital óptica, memoria de títulos de 150 discos y TEXTO CD. El modelo CHA-1214 Ai-NET admite 12 discos y el modelo CHM-S620 Bus-M es un cambiador de 6 discos y tamaño reducido.

Contents

Operating Instructions

WARNING

WARNING................................................. 2

CAUTION .................................................. 2

PRECAUTIONS ........................................ 2

Basic Operation

Opening the Front Panel ................................... 4

Hiding the Front Panel ...................................... 4

Initial System Start-Up ..................................... 4

Turning Power On and Off................................ 4

Display Angle Adjustment ................................ 4

Setting the Front Panel closing mode ............... 5

Adjusting Volume/Balance (Between Left and

Right)/Fader (Between Front and Rear) ........ 5

Audio Mute Function........................................ 5

Displaying Time................................................5

Setting Time...................................................... 5

Changing Lighting Color .................................. 6

Dimmer Control ................................................ 6

Subwoofer On and Off...................................... 6

Sound (Beep) Guide Function .......................... 7

Turning Mute Mode On/Off.............................. 7

CD Text Scroll Setting ...................................... 7

Digital Output On and Off (CDA-7969 only)...7

Setting the AUX Mode...................................... 8

Demonstration................................................... 8

Adjusting the built -in Audio Processor ............ 9

Blackout Mode On and Off...............................9

Switching the Display Modes ........................... 9

Displaying the Title/Text................................. 10

Titling Discs/Stations...................................... 11

Searching for Titled Discs/Titled Stations/

CD T ext Discs..............................................11

Erasing Disc Title (CD/CD Changer only)..... 11

Selecting DHE Mode ...................................... 12

Equalizer Presets............................................. 12

Adjusting the Equalizer Settings..................... 13

Memorizing the Equalizer Settings................. 13

Recalling the Memorized Equalizer ............... 13

Memorizing the Time Correction Setting ....... 13

ENGLISH

Recalling the Memorized Time Correction

Setting.......................................................... 13

Adjusting the Time Correction ....................... 14

Radio Operation

Manual Tuning................................................ 15

Automatic Seek Tuning .................................. 15

Manual Storing of Station Presets .................. 16

Automatic Memory of Station Presets............ 16

Storing into Direct Access Preset (D.A.P.)

Band............................................................. 17

Tuning to Preset Stations ................................ 17

Mono/Stereo Switching .................................. 17

CD Player Operation

Opening and Closing the Movable display..... 18

Playback.......................................................... 18

Music Sensor (Skip)........................................ 19

Fast Forward and Backward ........................... 19

Repeat Play ..................................................... 19

M.I.X. (Random Play) .................................... 19

Scanning Programs ......................................... 19

Controlling CD Changer (Optional) ............... 20

Multi-Changer Selection................................. 21

Remote Control Operation

Controls on Remote Control ........................... 22

Battery Replacement....................................... 23

Information

In Case of Difficulty ....................................... 24

Specifications.................................................. 25

Installation and Connections

Warning ........................................................... 26

Caution............................................................ 26

Precautions...................................................... 26

Installation ...................................................... 27

Connections .................................................... 28

LIMITED WARRANTY

1-EN

WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire, electric shock or other injury.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.

DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY.

When inserting the batteries, be sure to observe proper polarity (+ and –) as instructed. Rupture or chemical leakage from the battery may cause fire or personal injury.

PRECAUTIONS

Temperature

Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your unit on.

Moisture Condensation

You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.

Damaged Disc

Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the product.

2-EN

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off.

Inserting Discs

Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc. Make sure the label side is facing up when you insert the disc. Your player will automatically eject any disc that is inserted incorrectly. If the player continues to eject a correctly inserted disc, push the RESET switch with a pointed object such as a ball-point pen. Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.

New Discs

As a protective measure to prevent the CD from jamming, the CD player will automatically eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ball-point pen or other such instrument, then insert the disc again.

Installation Location

Make sure the CDA-7969/CDA-7867 will not be installed in a location subjected to:

• Direct sun and heat

• High humidity and water

• Excessive dust

• Excessive vibrations

Correct Handling

Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.

CORRECT

INCORRECT CORRECT

Disc Cleaning

Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.

Center Hole

Bumps

Center Hole

New Disc

Outside (Bumps)

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use any special shape discs. Use of special shape discs may cause damage to the mechanism.

Disc Accessories

There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.

Disc StabilizerTransparent Sheet

3-EN

Basic Operation

Audio Control MODE

TUNE

DN g f UPMUTE

Opening the Front Panel

1 Press the Open button on the Front Panel.

Open Button

NOTE

Hide the Front Panel if it does not come out within 6 seconds after the Open button has been pressed. The power will turn off after the Front panel hiding.

PWRINTLZ CLK

c /HIDE

F6F5F4

Turning Power On and Off

1 Press the PWR (Power) button to turn on the unit.

NOTE

The unit can be turned on by pressing any other button except the eject c button.

The volume level gradually increases to the previous level you were listening to before the unit was turned off. Press and hold the PWR button for at least 3 seconds to turn off the unit.

NOTE

The very first time the power is turned on, the volume will start from level 12, in the tuner mode.

Hiding the Front Panel

1 Press the HIDE button on the Front Panel for at

least 3 seconds.

NOTES

• The Front Panel will stop moving if there is an

obstacle inside the compartment. In that case, remove the obstacle and press the HIDE button again for at least 3 seconds.

• The power will turn off after the Front panel hiding.

Initial System Start-Up

1 Immediately after installing or applying power to the

unit, it should be initialized. Press the RESET switch with a ballpoint pen or any other pointed object.

NOTE

This should be operated when the front panel is hidden.

RESET switch

NOTE

The RESET switch is also on the front panel (to the right of the TITLE button).

4-EN

Display Angle Adjustment

Movable display

The movable display may be adjusted to 3 different angles depending upon user preference.

1 Press the F button, and when the FUNC

indicator blinks, adjust the movable display angle by pressing button F1 (DOWN) or F2 (UP).

NOTES

• The display will close a half minute after the ignition

key is turned to the OFF position.

• The adjusted angle of the display is stored in memory.

There is no need to re-adjust the angle when the power is turned back on.

CAUTION

Keep hands (or any other object) away fr om the display while it is opening or closing to avoid damage or injury . The bac k of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Setting the Front Panel closing mode

Audio Mute Function

1 Press and hold the INTLZ button for at least 2

seconds.

2 Press the f UP button repeatedly to select

"CLOSE". Each press of the f UP button changes the modes as shown:

→ AMBER → DIM → SUB-W → BEEP → MUTE

D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←

∗ CDA-7969 Only

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button to toggle mode between

CLOSE AUTO and MANU.

• CLOSE AUTO: The Front Panel automatically closes when ACC is on OFF.

• CLOSE MANU: The Front Panel remains open until closed manually.

4 When the setting is completed, press the INTLZ

button for at least 2 seconds to return to the normal mode.

Adjusting Volume/Balance (Between Left and Right)/Fader (Between Front and Rear)

1 Press the MODE button repeatedly to choose the

desired mode. Each press changes the modes as follows:

→ VOLUME → BALANCE → FADER

Activating this function will instantly lower the volume level by 20 dB.

1 Press the MUTE button to activate the MUTE

mode. The audio level will decrease by about 20 dB. Pressing the MUTE button again will bring the audio back to its previous level

Displaying Time

1 Press the CLK (clock) button repeatedly until the

time is displayed. Each press changes the modes as follows:

Radio mode

Clock priority

Radio frequency

CD Player/Changer modes

Playing time mode

NOTE

Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display.

→ →→

Clock priority

→→→

mode

TITLE mode

mode

←

DISC TEXT mode

TRACK TEXT mode

TITLE mode

←

Setting Time

1 While the clock time is displayed, press and hold

the CLK (clock) button for at least 3 seconds. The time indication will begin to blink.

NOTES

• If the MODE button is not pressed in 5 seconds after selecting the BALANCE or FADER mode, the unit automatically returns to the VOLUME mode.

• When the subwoofer mode is ON, its level may also be adjusted.

2 Rotate the Audio Control knob until the desired

sound is obtained in each mode.

NOTE

Depending on the connected devices, some functions and display indications do not work.

2 Press the F4 button while the time indication is

blinking to set seconds to "0".

3 Press the F5 button to adjust the hours while the

time indication is blinking.

4 Press the F6 button to adjust the minutes while

the time indication is blinking. The time indication will stop blinking 5 seconds after the last adjustment. The time will automatically be set.

5-EN

Basic Operation

Audio Control MODE

TUNE DN g f UP

INTLZ CLK

Changing Lighting Color

1 Press and hold the INTLZ button for at least 2 seconds. 2 Press the f UP button repeatedly to select

"AMBER". Each press of the f UP button changes the modes as shown:

NOTE

If you press the DN g button the display scrolls in reverse sequence.

→ AMBER → DIM → SUB-W → BEEP → MUTE

D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←

∗ CDA-7969 Only

Press the TUNE button to toggle the mode between AMBER ON (amber) and AMBER OFF (green).

4 Press and hold the INTLZ button for at least 2

seconds to set the selected mode.

Dimmer Control

Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's backlighting is too bright at night.

1 Press and hold the INTLZ button for at least 2

seconds.

2 Press the f UP button repeatedly to select

"DIM"(DIMMER). Each press of the f UP button scrolls the modes as shown:

→ AMBER → DIM → SUB-W → BEEP → MUTE

D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←

∗ CDA-7969 Only

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button to select the Dimmer mode.

Each press toggles between DIMMER AUTO and DIMMER MANU.

4 Press and hold the INTLZ button for at least 2

seconds to activate the normal mode.

Subwoofer On and Off

1 Press and hold the INTLZ button for at least 2

seconds.

2 Press the f UP button repeatedly to select

"SUB-W." Each press of the f UP button changes the

modes as shown:

→ AMBER → DIM → SUB-W → BEEP → MUTE

D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←

∗ CDA-7969 Only

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button to toggle mode between

SUB-W ON and SUB-W OFF. If an Ai-NET compatible processor with

Subwoofer output is connected: Press the TUNE button after selecting the SUB-W

ON mode, and the subwoofer output phase is toggled NORMAL (0°) or REVERS (180°).

4 Press and hold the INTLZ button for at least 2

seconds after setting the SUB-W ON.

5 Press the MODE button repeatedly to select the

SUB-W mode.

→ SUB-W → BALANCE

VOLUME ← FADER ←

6 Rotate Audio Control knob until the desired

sound is obtained in each mode.

6-EN

Sound (Beep) Guide Function

CD T ext Scroll Setting

This function will give audible feedback with varying tones depending upon the button pressed.

1 Press and hold the INTLZ button for at least 2

seconds.

2 Press the f UP button repeatedly to select

"BEEP." Each press of the f UP button changes the modes as shown:

NOTE

If you press the DN g button the display scrolls in reverse sequence.

→ AMBER → DIM → SUB-W → BEEP → MUTE

D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←

∗ CDA-7969 Only

3 Press the TUNE button to toggle the mode

between BEEP ON and BEEP OFF.

NOTE

The initial setting at the factory is BEEP ON.

4 Press and hold the INTLZ button for at least 2

seconds to set the selected mode.

Turning Mute Mode On/Off

If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. This function can be turned ON or OFF from the head unit by following procedure below.

This CD player has the ability to scroll the disc and track name recorded on CD-Text discs. The scrolling feature will work with names greater than 12 characters. This feature will not work for the 12 character titles that were input manually .

1 Press and hold the INTLZ button for at least 2 seconds. 2 Press the f UP button repeatedly to select

"SCR"(SCROLL). Each press of the f UP button changes the

modes as shown:

→ AMBER → DIM → SUB-W → BEEP → MUTE

D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←

∗ CDA-7969 Only

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button to toggle mode between

SCROLL AUTO and MANU.

• SCROLL AUTO: the display of CD text is scrolled continuously.

• SCROLL MANU: the display is scrolled only when a disc is loaded or when a track is changed and the text information exceeds 12 digits.

4 When the setting is completed, press and hold

the INTLZ button for at least 2 seconds to return to the normal mode.

NOTES

• Initial mode is "SCROLL MANU".

• The unit scrolls only CD text names. The disc titles

input manually (refer to page 11) cannot be scrolled.

• The display of CD text will scroll even for text less than 12 characters.

1 Press and hold the INTLZ button for at least 2

seconds.

2 Press the f UP button to select the MUTE

mode. Each press changes the modes as shown:

→ AMBER → DIM → SUB-W → BEEP → MUTE

D-OUT ∗ ← CLOSE ← DEMO ← AUX ← SCR ←

∗ CDA-7969 Only

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button to turn on or off the

MUTE mode. Each press toggles between the MUTE ON and OFF modes.

NOTE

The initial setting at the factory is "MUTE ON."

4 Press and hold the INTLZ button for at least 2

seconds again to return to normal operation.

Digital Output On and Off (CDA-7969 Only)

If an optional Digital Phase Processor with the optic digital connector is Ai-NET connected, turn the digital output on or off as described below.

1 Press and hold the INTLZ button for at least 2 seconds. 2 Press the f UP button repeatedly to select "D-

OUT". Each press of the f UP button scrolls the modes as shown:

→ AMBER → DIM → SUB-W → BEEP → MUTE

D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←

∗ CDA-7969 Only

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button to select the D-OUT mode.

Each press toggles between the D-OUT ON and D-OUT OFF.

4 Press and hold the INTLZ button for at least 2

seconds to activate the normal mode.

7-EN

Basic Operation

Audio Control

BLACK OUT DN gTUNE f UP

INTLZ/DISP A.PROCSOURCE

Setting the AUX Mode

You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) to this component.

1 Press and hold the INTLZ button for at least 2

seconds.

2 Press the f UP button repeatedly to select

"AUX" . Each press of the f UP button changes the modes as shown:

NOTE

If you press the DN g button the display scrolls in reverse sequence.

→ AMBER → DIM → SUB-W → BEEP → MUT

D-OUT∗ ← CLOSE ← DEMO ← AUX (

∗ CDA-7969 Only ∗∗ Displayed after AUX-IN ON is set.

AUX Mode Display Setting∗∗)

E → SCR

3 Press the TUNE button to toggle the mode

between AUX-IN ON and AUX-IN OFF.

NOTES

• The initial setting at the factory is AUX-IN OFF.

• You can set the AUX mode display by pressing the

DN g or f UP button after AUX-IN ON is set, select the AUX mode display setting, and then press the TUNE button.

4 Press and hold the INTLZ button for at least 2

seconds to return to normal mode.

5 To adjust the volume, etc., first press the

SOURCE button and select the AUX mode, then make the necessary adjustment.

→ TUNER → CD → AUX

Demonstration

This unit has a Demonstration feature which simulates the display functions.

1 Press and hold the INTLZ button for at least 2

seconds.

2 Press the f UP button to select the DEMO

mode. Each press changes the modes as shown:

→ AMBER → DIM → SUB-W → BEEP → MUTE

D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←

∗ CDA-7969 Only

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button to turn on or of f the

DEMO mode. Each press toggles between DEMO ON and DEMO OFF .

If no button is pressed 30 seconds after the DEMO mode is turned ON, "DEMO" blinks 3 times in the display . The DEMO mode then begins.

NOTE

The initial setting at the factory is "DEMO OFF."

4 Press and hold the INTLZ button for at least 2

seconds again to return to normal operation.

NOTE

When AUX-IN ON is selected, a CD Changer cannot be used.

8-EN

+ 22 hidden pages