Design and specications are subject to change without notice.
ACVDS950
Safety1.
Intended use1.1
The DVD Player plays lm and photos from DVD, USB and memory card.
The appliance also plays music from CD. Read the manual carefully before
the rst use.
DVDs and DVD appliances are manufactured under the worldwide
2
i
i
agreed DVD regional code system that the appliance will operate
only with corresponding disc of the same regional code. If the code
number on the label of a DVD does not match that on the label
alongside, the DVD will not play on this appliance.
The appliance has built in copyright protection technology that
prevents copying from a disc to any media. If a video recorder is
connected to the appliance, the video output image will be distorted
during recording.
Due to the great variety of products with external memory
connection (USB, SD/MMC, etc.) and their sometimes quite
manufacturer-specic functions we can neither guarantee that all
devices will be recognised, nor that all operating options that are
possible in theory will actually work.
WARNING
!
CAUTION
!
i
Labels in this manual1.2
A warning means that injury or death is possible if the instructions
are not obeyed.
A caution means that damage to the equipment is possible.
A note gives additional information, e.g. for a procedure.
3
4
General safety instructions1.3
WARNING
!
!
!
!
i
L
Do not put force on the appliance. The appliance can fall and can
cause serious injury.
CAUTION
Do not spill any liquid on the appliance.
WARNING
Do not insert any objects in the ventilation holes.
CAUTION
Do not block the ventilation holes.
This appliance is double insulated; therefore no earth wire is
required. Always check that the mains voltage corresponds to the
voltage on the rating plate. Never attempt to replace the adaptor
plug with a regular mains plug.
This appliance employs a laser system. To prevent direct exposure
to the laser beam, do not open the appliance. Visible laser
radiation when open and interlock defeated.
Preparations for use2.
Unpacking2.1
● Unpack the appliance carefully.
● Check the package contents as described below. If any item is missing,
please contact your reseller.
● Remove the labels from the front panel carefully if present.
We recommend that you retain the original carton and packing
i
materials in case it ever becomes necessary to return your product
for service. This is the only way to safely protect the product
against damage in transit. If you do dispose of the carton and the
packing materials, please remember to recycle with due care to the
environment.
Package contents2.2
The following items are included in the received package:
1 Portable DVD player
1 Carrying bag / mounting kit
1 AC/DC adaptor + cable
1 Remote control
1 Battery cell (CR2025)
1 Operator manual
i
If any item is missing, please contact your reseller.
Installation3.
ACVDS950
● Put the appliance on a horizontal at surface.
● Connect the appliance to a power source.
Read the paragraph "Connecting to a power source".
● Install the batteries in the remote control.
Read the paragraph "Remote control".
!
● Do not put the appliance near a heat source.
● Do not expose the appliance to direct sunlight.
i
CAUTION
This appliance is equipped with rubber feet to prevent it from
moving. The feet are made from non-migrating material specially
formulated to avoid leaving any marks or stains on furniture.
5
However, certain types of furniture polishes, wood preservatives or
2
1
cleaning sprays cause the rubber to soften and leave marks or a
residue on the furniture, and potentially risk the surface to become
damaged. To prevent damage to wooden surfaces, we recommend
that you apply self-adhesive pads to the bottom of the rubber feet
before installation.
Connecting to the mains3.1
● Connect the adaptor plug on the adaptor cable to the DC IN 12 V connection.
● Connect the mains plug to a wall socket.
Cordless operation3.2
The appliance can also be operated cordless. For this purpose, the appliance
uses an internal battery pack. The battery pack has to be charged rst.
Whilst the appliance is connected to the power source, its battery is
i
charged automatically. When the battery is fully charged,
the charging process is completed.
Remote control3.3
Installing the battery
● Press the catch and at the same
time pull out the battery tray.
● Insert 1 lithium battery, type CR2025
3V battery with the stamped (+)
mark facing upward.