9” Portable DVD player
ALD1915H
ACVDS935T
User manual
Gebruiksaanwijzing
Manuel de l’utilisateur
Manual de instrucciones
Gebrauchsanleitung
Οδηγίες χρήσεως
Brugsanvisning
GB 2
NL 26
FR 50
ES 74
DE 98
EL 122
DA 146
2
Table of contents
1. Safety ........................................................................... 3
1.1 Intended use ....................................................................3
1.2 Labels in this manual .......................................................3
1.3 General safety instructions ..............................................4
2. Preparations for use ................................................... 4
2.1 Unpacking ........................................................................4
2.2 Package contents ............................................................5
3. Installation ................................................................... 5
3.1 Connecting the units ........................................................6
3.2 Support strap ...................................................................6
3.3 Connecting to a power source .........................................7
3.4 Game pad ........................................................................7
3.5 Remote control.................................................................8
4. Functions .....................................................................9
4.1 Master unit .......................................................................9
4.2 Slave unit .......................................................................10
4.3 Game pad ......................................................................10
4.4 Remote control...............................................................11
5. Operation ................................................................... 12
5.1 Master power switch ......................................................12
5.2 Quick start ......................................................................12
5.3 DVD/CD functions ..........................................................14
5.4 Game functions ..............................................................17
5.5 DVD setup menu operation............................................17
5.6 Slave setup menu operation ..........................................19
6. Cleaning and maintenance ...................................... 20
6.1 Handle and care of a disc ..............................................20
7. Troubleshooting ........................................................ 21
8. Technical data ........................................................... 23
9. Disposal of used electrical and
electronic equipment ................................................ 25
Copyright notice
Design and specications are subject to change without notice.
3
ACVDS935T
Safety1.
Intended use1.1
The LCD display with built-in DVD player plays lm and photos from DVD, USB
and memory card. The game pad can be connected to play video games.
The appliance also plays music from CD. Read the manual carefully before
the rst use.
DVDs and DVD appliances are manufactured under the worldwide
2
i
i
agreed DVD regional code system that the appliance will operate
only with corresponding disc of the same regional code. If the code
number on the label of a DVD does not match that on the label
alongside, the DVD will not play on this appliance.
The appliance has built-in copyright protection technology that
prevents copying from a disc to any media. If a video recorder is
connected to the appliance, the video output image will be distorted
during recording.
Due to the great variety of products with external memory
connection (USB, SD/MMC, etc.) and their sometimes quite
manufacturer-specic functions we can neither guarantee that all
devices will be recognised, nor that all operating options that are
possible in theory will actually work.
Labels in this manual1.2
WARNING
!
!
i
A warning means that injury or death is possible if the instructions
are not obeyed.
CAUTION
A caution means that damage to the equipment is possible.
A note gives additional information, e.g. for a procedure.
4
General safety instructions1.3
WARNING
!
!
!
!
i
L
Do not put force on the appliance. The appliance can fall and can
cause serious injury.
CAUTION
Do not spill any liquid on the appliance.
WARNING
Do not insert any objects in the ventilation holes.
CAUTION
Do not block the ventilation holes.
This appliance is double insulated; therefore no earth wire is required.
Always check that the mains voltage corresponds to the voltage on
the rating plate. Never attempt to replace the adaptor plug with a
regular mains plug.
This appliance employs a laser system. To prevent direct exposure
to the laser beam, do not open the appliance. Visible laser radiation
when open and interlock defeated.
Preparations for use2.
Unpacking2.1
● Unpack the appliance carefully.
● Check the package contents as described below. If any item is missing,
please contact your reseller.
● Remove the labels from the front panel carefully if present.
We recommend that you retain the original carton and packing materials
i
in case it ever becomes necessary to return your product for service.
This is the only way to safely protect the product against damage in
transit. If you do dispose of the carton and the packing materials, please
remember to recycle with due care to the environment.
5
ACVDS935T
Package contents2.2
The following items are included in the received package:
1 LCD display with built-in DVD player (master unit)
1 LCD display (slave unit)
2 In-ear headphones
1 Unit connection cable
1 Game pad
1 Remote control
1 Battery (CR2025)
1 Support strap
1 Carrying bag
1 Operator manual
i
If any item is missing, please contact your reseller.
Installation3.
● Install the batteries in the remote control.
Read the paragraph "Remote control".
● If required, install the batteries in the game pad.
Read the paragraph "Game pad".
● Connect the two units to each other.
Read the paragraph "Connecting the units".
● Attach the unit to the head rest in the car.
Read the paragraph "Support strap".
● Connect the master unit to a power source.
Read the paragraph "Connecting to a power source".
!
● Do not put the appliance near a heat source.
● Do not expose the appliance to direct sunlight.
CAUTION
6 7
ACVDS935T
Connecting the units3.1
● Connect the adaptor plugs of the connection cable to the DC OUT 9-12 V
connection and to the AV OUT connection in the master unit.
● Connect the other ends of the connection cable to the DC IN 9-12 V
connection and to the AV IN connection in the slave unit.
Support strap3.2
● Secure the rear of the unit to the
support strap.
ACVDS935T
ACVDS935T
Connecting to a power source3.3
Connecting to a car battery
For this connection the 12 VDC adaptor + cable has to be used.
● Connect the adaptor plug of the adaptor cable to the DC IN 9-12 V
connection in the master unit.
● Connect the DC plug to 12 VDC receptacle of the vehicle.
Connecting to the mains
For this connection the AC/DC adaptor + cable has to be used. The AC/DC
adaptor + cable is not supplied with the appliance.
● Connect the adaptor plug of the adaptor cable to the DC IN 9-12 V
connection in the master unit.
● Connect the mains plug to a wall socket.
Game pad3.4
Installing the batteries
The batteries for the game pad are not
supplied with the appliance.
● Remove the battery cover.
● Insert the batteries matching the (+)
and (-) polarity markings.
● Re-install the battery cover.
CAUTION
!
Incorrect installation can cause battery leakage and corrosion
which will damage the appliance. Corrosion, oxidation, battery
leakage and any other gradually acidic defect of this nature will
invalidate the guarantee.
Remote control3.5
2
1
Installing the batteries
● Press the catch and at the same
time pull out the battery tray.
● Insert 1 lithium battery, type CR2025
3V battery with the stamped
(+) mark facing upward.
● Insert the battery tray into the
remote control.
88 9
ACVDS935T
4
5
6
7
8
9
3
13
2 1
10
11
12
14
15
16
17
19
18
Functions4.
Master unit4.1
1 OPEN button
2 SD/MS/MMC card slot
3 USB slot
4 COAXIAL output
5 Headphone jack
6 AV OUT connection
7 DC OUT 9-12 V connection
8 DC IN 9-12 V connection
9 Master power switch
10 SOURCE button
11 MENU/PBC button
12 PLAY/PAUSE button
13 SETUP button
14 STOP button
15 VOL + button
16 VOL - button
17 ENTER button
18 Arrow buttons
19 LCD display
Slave unit4.2
27
28
29
30
25
26
21
20
22
24
23
32
31
33
40
38
34
35
36
37
39
20 MODE button
21 MUTE button
22 VOL - button
23 VOL + button
24 LCD display
26 Arrow buttons
27 Headphone jack
28 AV IN connection
29 DC IN 9-12 V connection
30 Master power switch
25 ENTER button
Game pad4.3
31 Joystick
32 Direct pad
33 SELECT button
34 Power switch
35 START button
36 A button
37 B button
38 X button
39 Y button
40 RESET button
10 11
41
43
42
44
45
50
51
52
53
48
46
49
67
66
64
65
63
61
57
56
55
54
58
62
60
59
47
41 STEP button
42 SEARCH button
43 Digit buttons (0-10+)
44 SUBTITLE button
45 ANGLE button
46 TITLE button
47 Arrow buttons
48 ENTER button
49 SETUP button
50 REPEAT button
51 AB button
52 PROGRAM button
53 ZOOM button
54 REV button
55 FWD button
56 PREV button
57 NEXT button
58 VOL - button
59 VOL + button
60 MODE button
61 STOP button
62 PLAY/PAUSE button
63 AUDIO button
64 MENU/PBC button
65 DISPLAY button
66 MUTE button
67 SOURCE button
i
ACVDS935T
ACVDS935T
Remote control4.4
The arrow buttons are buttons for navigation in the DVD menu.
11
12
Operation5.
All functions of the unit are accessible using the remote control. All instructions
refer to operation with the remote control, unless indicated otherwise.
Master power switch5.1
The units are equipped with a master power switch (9 & 30) located at the
side panel.
● Set the switch into the ON position prior to taking the units into operation.
● Set the switch into the OFF position prior to disconnecting from the mains.
i
● The units are designed to be operated using the remote control.
Quick start5.2
General functions
● To connect the master unit with the slave unit, proceed as follows:
Connect the adaptor plugs of the connection cable to the DC OUT 9-12 V •
connection and to the AV OUT connection in the master unit.
Connect the other ends of the connection cable to the DC IN 9-12 V •
connection and to the AV IN connection in the slave unit.
● To select the source mode (DVD/CARD/USB), press the SOURCE button (67).
● To adjust the volume, press the VOL + button (59) or the VOL - button (58).
● To mute or restore sound, press the MUTE button (66).
● To adjust the screen settings (brightness, contrast, hue, saturation), press
the MODE button (60).
● To connect a headphone, insert the cable plug in the headphone jack (6 & 28).
To prevent hearing damage, remember to adjust the volume to a comfortable
level.
13
ACVDS935T
DVD/CD functions
● Switch on the units. Select the DVD mode.
● To insert a disc:
Press the OPEN button (1) to open the disc compartment.•
Insert the disc with the label upwards.•
Close the disc compartment.•
The display shows the total number of tracks on the CD.
● To start playback, press the PLAY/PAUSE button (62) once.
● For extended instructions, read the paragraph "DVD/CD functions" further
on in this manual.
USB functions
● Switch on the master unit.
● Insert the USB device in the slot (3). The device can only be connected
one way.
● Select the USB mode.
● To start playback, press the PLAY/PAUSE button (62) once.
● For extended instructions, read the paragraph "USB functions" further on
in this manual.
SD/MS/MMC functions
● Switch on the master unit.
● Insert the SD/MS/MMC device in the slot (2). The device can only be
connected one way.
● Select the memory card mode.
● To start playback, press the PLAY/PAUSE button (62) once.
Game functions
● Before connecting the game pad, make sure that the game pad is
switched off before connecting to the appliance.
● Connect the RCA cable to the appliance.
The yellow plug is for the video signal.•
The red and white plug are for the audio signal.•
● Switch on the appliance.
● Slide the power switch (34) to the ON position.
14
DVD/CD functions5.3
After the disc has been loaded, the disc starts automatically
● Press the arrow buttons (47) to select a menu item for DVDs.
● Press the ENTER button (48) to enter the selected menu item.
During playback, the following functions are available:
● To select a chapter (DVD) or track (CD), press the digit buttons (43).
● To select the next or previous chapter (DVD) or track (CD), press the
PREV button (56) or the NEXT button (57).
● To forward or rewind the DVD, press the FWD button (55) or the
REV button (54). The available speed rates are: 2x, 4x, 8x, 16x, 32x.
● To pause playback, press the PLAY/PAUSE button (62) once; to resume
playback, press the button again.
● To stop playback temporarily, press the STOP button (61) once.
Press the button again to stop playback permanently, or press the
PLAY/PAUSE button (62) to resume playback.
● To repeat a chapter (DVD) or one or all tracks (CD):
Press the REPEAT button (50) once to repeat the current chapter or •
track.
Press the button once again to repeat the current title.•
Press the button once again to repeat all titles.•
Press the button once again to cancel the function.•
● To view a specic title of a DVD, press the TITLE button (46).
Use the arrow buttons to select the title.
● To select the audio language of a DVD, press the AUDIO button (63)
repeatedly until the desired language is set.
● To switch on the subtitles of a DVD, press the SUBTITLE button (44).
Press the button again to switch off the subtitles.
● To select extra information of a DVD or CD (remaining time/passed
playtime/track number/chapter number), press the DISPLAY button (65).
● To select the camera angle, press the ANGLE button (45).
● To show the menu of available titles, press the TITLE button (46).
● To return to the main menu, press the MENU/PBC button (64).
● Press the DISPLAY button (65) to change the display settings.
15
ACVDS935T
i
● Normally, if an MP3 disc is loaded, the unit will take longer time to read
the initial data.
● A DVD that does not match the region code cannot be read by the unit.
● If a disc contains mixed content (e.g. MP3 and video les), the unit will
only recognise, list and play one content type.
● The screen saver becomes active if no disc has been loaded for 3 minutes,
or if the unit has been in STOP mode for 3 minutes.
Using the SEARCH function
The SEARCH function can be used to select a specic starting point on a
DVD or CD.
● Press the SEARCH button (42).
● Press the digit buttons (43) to select an entry.
The possible entries for DVD are:
Disc time Chapter Title Chapter time Title time -
The possible entries for CD are:
Track time Specic track -
● Press the digit buttons to set a selection.
Using the PROGRAM function
● Press the PROGRAM button (52) to enter the PROGRAM function.
● Press the digit buttons (43) to select a desired track, and use the arrow
button down (47) to highlight the next entry.
● To conrm the selection and start the program, move the highlight to
"START" and press the ENTER button (48).
● To stop the progam, press the PROGRAM button (52) and press ENTER.
16
Using the ZOOM function
This function can be used for zooming in and out on photos and DVDs.
The available zoom ratios are: 2x, 3x, 4x, 1/2x, 1/3x, 1/4x.
● Press the ZOOM button (53).
● Press the ZOOM button again to set the correct size.
● Press the arrow buttons to move through the picture.
Using the MP3/WMA/MPEG4 playback function
● Insert an MP3/WMA/MPEG4 disc. A content menu will display on the TV
screen.
● Press the up/down arrow buttons (47) to select a folder or a le.
● Press the ENTER button (48) to enter the selected folder or le.
● Press the PROGRAM button (52) to switch between folders and les.
Press ENTER (48) to conrm.
Using the JPEG playback function
● Insert a JPEG disc. A content menu will display on the TV screen.
● Press the up/down arrow buttons (47) to select a folder or a le. Press the
ENTER button (48) to start the slide show.
● Press the PLAY/PAUSE button (62) to hold the slide show at the current
picture.
● Press the PLAY/PAUSE button (62) to resume the slide show.
● Press the PREV button (56) or the NEXT button (57) to select the
previous or next picture.
● To magnify the picture, press the ZOOM button (53). To zoom in or out on
the picture, press the FastForward button (55) or FastRewind button (54).
To move the picture, press the arrow buttons (47).
Using the Video CD playback function
● Press the MENU/PBC button (64) to switch on the playback function.
● Insert a Video CD.
● To start playback, press the PLAY/PAUSE button (62) once.
● To select the audio channel during Video CD playback, press the AUDIO
button (63).
● Press the MENU/PBC button (64) to quit the playback and return to the
main menu.
17
ACVDS935T
Game functions5.4
After having connected the game pad, a menu screen appears on the display.
● Select a game from the menu. Scroll up or down with the joystick (31).
● Press the START button (35) to conrm.
● If you want to change game, press the RESET button (40) and select a
new game from the menu.
● When you are nished, slide the power switch (34) to the OFF position
and disconnect the RCA cable.
DVD setup menu operation5.5
i
To change the initial settings
The following actions have to be carried out with the remote control.
● Press the SETUP button (49).
● Press the arrow buttons (left and right) (47) to select a menu. The submenu
is displayed directly.
● Press the arrow buttons (up and down) to enter the submenu.
● Press the ENTER button (48) to select a setting, or the left arrow button to
cancel the selection. If the selection invokes a subsequent submenu,
repeat the previous steps to select a setting.
● Press the ENTER button (48) to store the setting.
● Press the SETUP button (49) to exit.
This menu only works in DVD mode.
General setup page
● TV DISPLAY to set the aspect ratio. The following settings are available:
4:3 PANSCAN, 4:3 LETTERBOX, 16:9, WIDE SQUEEZE.
● ANGLE MARK to display the angle setting information. Switch this
function ON or OFF.
● OSD LANGUAGE to change the language. The following settings are
available: English, French, Dutch, German, Spanish, Greek.
● CLOSED CAPTIONS to display closed captions. Switch this function
ON or OFF.
● SCREEN SAVER to activate the screen saver. Switch this function
ON or OFF.
18
Audio setup page
Downmix
● Select LT/RT to mix 5.1-channel audio into left channel and right channel.
● Select STEREO to mix 5.1 channel audio into signal stereo.
This function is only available for Dolby AC-3 encoded 5.1-channel
i
Digital output
● Select SPDIF OFF to switch off the digital audio signal output.
● Select SPDIF RAW to set the digital audio signal output to its raw format
(DTS/Dolby Digital 5.1).
● Select SPDIF PCM to set the digital audio signal output to PCM format.
Dolby digital audio setup
DUAL MONO
● Stereo: both channels as is. STEREO is the default setting.
● L-Mono: left channel only.
● R-Mono: right channel only.
● Mix-Mono: the average of both the left and right channel.
i
DYNAMIC
● Select the value for the dynamic range compression to avoid losing sound
details resulting from a low volume.
discs.
This function is only available for Dolby AC-3 encoded 2-channel
discs.
Video setup page
● SHARPNESS: to adjust the screen sharpness.
● BRIGHTNESS: to adjust the screen brightness.
● CONTRAST: to adjust the screen contrast.
● HUE: to adjust the screen tint. This option is available for NTSC playback only.
● SATURATION: to adjust the saturation.
Preference setup page
The general system functions can only be set with an empty DVD
i
player.
19
ACVDS935T
● TV TYPE to set the colour system. The following settings are available:
PAL, AUTO, NTSC.
● AUDIO to set the audio language.
● SUBTITLE to set the subtitle language.
● DISC MENU to set the language for the disc menu.
● PARENTAL to set a rating for movies played by the unit. Movies rated
higher than the level set for the parental lock can not be viewed. This
function is only available with discs that have parental rating encoded.
● MP4 SUBTITLE to set the subtitle language for MP4 les. The following
settings are available: Western European, Greek.
● DEFAULT: Restore all default settings of the unit.
Password setup page
PASSWORD
● Enter the current password in the rst box.
● Enter the new password in the second box.
● Enter the new password again in the third box to conrm.
The default password (1369) is always active, even if the password
i
has been reset.
Slave setup menu operation5.6
● Press the MODE button (60) to enter the slave setup menu.
Picture
● BRIGHT to set the brightness of the picture.
● CONTRAST to set the contrast of the picture.
● COLOR to set the colour of the picture.
● HUE: to adjust the screen tint. This option is available for NTSC playback
only.
● SHARPNESS: to adjust the screen sharpness.
● LANGUAGE to set the language of the country.
● PICT ASP to set the aspect ratio.
Sound
● VOLUME to set the volume.
20
Cleaning and maintenance6.
WARNING
!
● Clean the outside of the appliance with a soft cloth. When the appliance is
very dirty, dampen the cloth slightly with water and a neutral solution.
● Hold the disc with ngers. Hold the disc outer edge and/or the centre
spindle hole. Do not touch the disc surface.
● Do not bend or press the disc. Do not expose the disc to direct sunlight or
heating sources.
● Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc
surface gently, radially, from centre towards the outer edge.
● Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning.
Such cleaning uids will permanently damage the disc surface.
Before performing any cleaning or maintenance, switch off and
unplug the appliance.
Handle and care of a disc6.1
21
ACVDS935T
Troubleshooting7.
Trouble Action
No sound or incomplete Check if the random equipment are switched on correctly.
audio Check cables for connection problems.
Check if the correct source is selected.
Check volume or mute setting.
No power Check if the power cord has been properly connected to
the power outlet.
Check if the master power switch on the side panel is ON.
Malfunction Should the unit develop a serious malfunction, unplug
the unit for 30 minutes. After this, power on the unit and
restore to factory default.
DVD/VCD/CD
Trouble Action
No playback There is no disc inserted. Load a disc in the master unit.
Disc is loaded upside down. Place the disc with the label
facing upward.
Rating level of the disc is higher than the rating level
setting of the unit.
Invalid region code.
Incorrect type of disc.
Disc may be damaged or dirty, clean the disc or try
another disc.
Moisture may have condensed inside the unit. Remove the
disc and leave the unit powered on for one or two hours.
No sound or incomplete Select another audio track.
audio During SCAN, SLOW MOTION or SINGLE STEP the
sound is muted.
Check if the disc is in fast forward or fast rewind mode.
Press the PLAY/PAUSE button (62).
No scan or skip possible Some discs are programmed to refuse user action at
certain sections. This is no malfunction. Single chapter
or track discs do not allow skip function.
22
Picture distorted or noisy Disc may be damaged or dirty, clean the disc or try
another disc.
Check TV system setting (PAL/NTSC).
Clean the disc.
Picture not full screen Select the screen format from the unit's setup menu.
Select screen format in disc start menu.
MP3 playback
Trouble Action
No sound or incomplete If MP3 data is mixed with other les on CD, the appliance
audio may play the non-MP3 les as noise or without sound or
it rejects the disc.
Check if the played le is in MP3 format or select
another le to play.
USB playback
Trouble Action
No playback USB device is not installed or installed incorrectly. Insert
USB device into slot.
Incompatible USB device used. Playback using any USB
device cannot be guaranteed. Please try another USB
device.
Remote control (RC)
Trouble Action
RC does not function Check the battery installation.
Point the RC at the remote control sensor.
Stay within 8 metres of the appliance.
23
ACVDS935T
Technical data8.
DVD player
Parameter Value
Voltage 9-12 V
Input voltage 100 ~ 240 VAC / 50 ~ 60 Hz
Power consumption < 18 W
Max. power output 2 x 1.5 W
USB connection USB 2.0 compatible
Flash memory connection SD/MS/MMC
Dimensions (W x H x D) 260 x 182 x 37.5 mm
Weight 900 g
Disc output
Parameter Value
Laser type Semiconductor
Signal/noise ratio > 80 dB
Wow and utter Below the limit of the unit
Audio dynamic range > 85 dB
Frequency response 20 Hz - 20 kHz (1 dB)
TV system PAL/NTSC
Region code 2
DC
Output Terminals
Parameter Value
Headphones output impedance 32 Ω
Analog video 1 Vp-p (75 Ω)
Analog audio 1.0 Vrms (1 KHz, 0 dB)
Game pad
Parameter Value
Power consumption 4x 1.5 V
Battery size CR2025
24
Remote control
Parameter Value
Power consumption 2x 1.5 V
Battery size CR2025
Supported media formats
Parameter Value
Disc types DVD / DVD+R(W) / DVD-R(W) / (S)VCD /
CD / CD-R(W)
Picture formats JPEG / Kodak Picture CD
Video formats MPEG1, MPEG2, MPEG4, WMA, AVI, Xvid
Audio formats MPEG1 Layer I, II, III PCM Dolby Digital, MP3
Working environment
Parameter Value
Operating temperature 0 - 45 °C
Relative humidity 5% - 90%
25
ACVDS935T
Disposal of used electrical 9.
and electronic equipment
Z
The meaning of the symbol on the material, its accessory or packaging
indicates that this product shall not be treated as household waste. Please,
dispose of this equipment at your applicable collection point for the recycling
of electrical and electronic equipments waste. In the European Union and
Other European countries which there are separate collection systems for
used electrical and electronic product. By ensuring the correct disposal of
this product, you will help prevent potentially hazardous to the environment
and to human health, which could otherwise be caused by unsuitable waste
handling of this product. The recycling of materials will help conserve natural
resources. Please do not therefore dispose of your old electrical and
electronic equipment with your household waste.
For more detailed information about recycling of this product, please contact
your local city ofce, your household waste disposal service or the shop
where you purchased the product.
For more information and warranty conditions, please visit: www.akai.eu
Loading...