Airlive WHP-1100 DATASHEET

WHP/WHB-1 100

802.11b Wireless Outdoor 20dBm Access Point/Bridge

he AirLive Outdoor family is the most complete
outdoor wireless solution in the industry. There
are 6 models to meet the demand of all type of

T

environment and applications. They allow transmission
distance up to over 30 kilometer in open space. Every
model is constructed of rock solid weather-proof cast
aluminum to operate in the most extreme environment.

All model includes a complete Power over Ethernet package with a 25 meter water-proof cable and DC
injector unit. Therefore you can use indoor power source and install the outdoor unit within close
distance to antenna for minimum cable signal loss.

The easy- to-use SNMP management utility include a built-in file transfer function to make antenna
alignment simple.
Data security in protected by the WEP, MAC access control and 802.1x functions

Point-to-point Mode

Bridges in point-to-point mode connect two networks in different locations
through a single wireless link. This allows two widely separated sites to share
resources, including a single high-speed connection to the Internet.

Point-to-Multipoint Mode

Bridges in point-to-multipoint mode connect three or more
networks in scattered buildings through wireless links. This allows
numerous sites in a wide area to share resources, including a
single high-speed connection to the Internet.

The AP model allows the WISP, Hotel, Resort, or Campus to

provide internet access over wide area wirelessly. The bridge

models are for wireless building-to-building network application. It

delivers higher transmission rates than an E1 or T1 line, and

eliminates the inconvenience of installing expensive leased line or

fiber-optic cable. All models can change firmware to operate in AP,

Bridge or Client mode.