Airlive WHB-1100 User Manual

WHB-1100

20dBm High Power Outdoor Bridge

he OvisLink WHB-1100 is a 11Mbps high
power bridge for outdoor building to building
application. It delivers higher transmission

T

rates than an E1 or T1 line, and eliminates the
inconvenience of installing expensive leased line or
fiber-optic cable.

Equipped with a cast aluminum water and shock
proof enclosure, the WHB-1100 can operate in all
kinds of weather condition. With 20dBm of power, it
reach distance of over 20 kilometer in open space.
Best of all, it is CE and FCC approved to allow legal
operation in most countries.

.

Out Door UnitOut Door Unit

DC Injector UnitDC Injector Unit

Optional AntennaOptional Antenna

The unit includes a complete Power over
Ethernet package with a 25 meter water-proof
cable and DC injector unit. Therefore you can
use indoor power source and connect to network
indoor. The outdoor unit can be installed within
close distance to antenna for minimum cable
signal loss.

The easy- to-use SNMP management utility
include a built-in file transfer function to make
antenna alignment simple. Data security in
protected by the WEP, MAC access control and

802.1x functions.

The WHB-1100 is ideal for deployment in office
buildings, farm ranch, resort, and campus
environments. Users no longer have to pay high
price for dedicated lease line or fiber optic
cabling. The unit can also change firmware to
operate in AP or Client mode. With OvisLink’s
wide range of wireless accessories and
expertise in outdoor solution, you can confident
with OvisLink’s outdoor wireless solution

To LANTo LAN

POE Kit Built-InPOE Kit Built-In

OvisLink Wireless High Power Outdoor SolutionsOvisLink Wireless High Power Outdoor Solutions

ModelModel DescriptionDescription ModelModel DescriptionDescription

WHB-1100 WHP-1100

20dBm Bridge 20dBm AP

WHB-1120 WHP-1120

WHB-1130

20dBm Bridge w/18dBi Antenna 20dBm AP w/18dBi Antenna

30dBm Bridge

WHP-1130

Application Environment

Point-to-point Mode

Bridges in point-to-point mode
connect two networks in different
locations through a single
wireless link. This allows two
widely separated sites to share
resources, including a single
high-speed connection to the
Internet.

30dBm AP

Point-to-multipoint Mode

Bridges in point-to-multipoint
mode connect three or more
networks in scattered buildings
through wireless links. This
allows numerous sites in a
wide area to share resources,
including a single high-speed
connection to the Internet.