JF-2HD
- 1 -
HANDS-FREE COLOR VIDEO INTERCOM
INTERPHONE VIDEO COULEUR MAINS LIBRES
Master monitor station
Moniteur maître
INSTALLATION & OPERATION MANUAL
MANUEL D'INSTALLATION ET D'UTILISATION
Sub monitor station
Moniteur secondaire
JF-2MED, JF-2HD
JF-2MED JF-2HD
FK1260 0706 A
- 10 -
EnglishFrançaisNederlands
Chime tone sounds, caller is seen on video monitor, and
outside sound is heard.
• Audio and video turns off after approx. 45 seconds in not
answered.
Press CALL button.
Press TALK button momentarily, and after the beep, communicate
hands-free. Transmit LED (red) lights when you talk, and goes off as
you listen to caller (or hear outside sounds).
Press TALK button once again, and after the beep,
communication ends.
NOTES: Communication (video) ends automatically after approx. 1 minute.
Press TALK button again momentarily, and after the beep,
communication ends.
To continue speaking using the press-to-talk mode, press TALK button
for 1 second or more each time to talk, and release to listen to the caller.
During communication, press and hold TALK button for 1 second or
more to change to press-to-talk mode. A beep sounds, and after approx.
1 second another beep sounds, PTT mode is entered. If TALK button is
pressed briefly (less than 0.5 seconds), communication ends.
Even without answering, door area can be seen and heard with video
and audio (for approx. 45 seconds). Inside sound is not heard outside.
NOTES: If the blue and white wires of the option connector are
shorted, PTT mode will not be operable.
Instant voice call function
PTT mode
During communication, instant voice call or entrance monitoring,
press MENU/MEMO button to display the menu screen.
Open door while the release mechanism is activated. During activation of door
release, the release symbol is displayed.
Press CALL button.
NOTES: When SET DOOR RELEASE setting is set
to "Not use", the release symbol
is not displayed and the release cannot be
performed. (Refer to section 7-8)
OPERATIONS
8
Answering a door call (HANDS-FREE mode, PTT mode)8-1
Activating door release8-2
1
3
4
3
4
5
2
2
1
PRESS THE TALK BUTTON TO END
2
3
PRESS THE TALK BUTTON TO END
PR
ESS TH
E TALK BUTTON
TO
EN
D.
PRESS THE TALK BUTTON TO END
- 11 -
English Français Nederlands
Press either CALL button or PLAY button. The selected Message changes
to yellow, "SENDING MESSAGE" is displayed, and the selected message
is played from door station.
Press PLAY button.
During communication, instant voice call or entrance
monitoring, press MENU/MEMO button to display the
menu screen.
NOTES: Record separate messages in advance for Message 1 and
Message 2. (Refer to section 7-6)
Press MONITOR button in the standby mode.
The video monitor displays the image from door
station 1 and the incoming audio is heard. If you
do not press TALK button, the caller will not hear
sounds from the inside station.
Press MONITOR button again to end.
NOTES: 1. To talk to the entrance during monitoring, momentarily press TALK button.
Press TALK button again to end communication.
2. The entrance monitoring turns off automatically after approx. 1 minute. To
monitor the entrance again, repeat from the beginning.
Press MONITOR button again to switch to door station 2. Each time MONITOR
button is pressed, the unit switches in the sequence "Standby" to "Door station 1
monitor" to "Door station 2 monitor" to "Standby".
When "Audio door station" or "Door station 2 not connected"
is set in the door station 2 setting, "Door station 2 monitor" is skipped (door
station 2 cannot be monitored). (Refer to section 7-7)
If the other person presses TALK button, hands-free
communication is possible.
Do not press TALK button during communication.
It will end the commnication.
Press and release TALK button to end.
Press CALL button to talk with the other person.
• CALL button (red) flashes and the "All Call" function is
activated to link all the master/sub stations.
• The reply of the other person is not heard.
NOTES: 1. Room-to-room communication ends automatically after approx. 10 minutes.
To perform room-to-room communication again, repeat from the beginning.
2. If a call is received from the entrance during room-to-room communication,
a chime tone sounds from the monitor station and sub station where
communication is taking place. Press TALK button to end the room-to-room
communication, and press TALK button again to switch to communication
with door station from which the call was received.
Message for entrance8-3
Entrance monitoring8-4
Room-to-room communication8-5
1
P
R
E
SS
TH
E TAL
K B
U
TT
O
N
TO
EN
D.
2
PRESS THE TALK BUTTON TO END
3
SEND MESSAGE FOR ENTRANCE SENDING MESSAGE
13
4
2
2
31
Loading...