AEG HC452600EB User Manual

HC412000GB EN User manual

www.aeg.com

2

CONTENTS

1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4. DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5. HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6. CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

8. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

9. TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

10. GREAT BRITAIN & IRELAND - GUARANTEE/CUSTOMER SERVICE . . . . . . . . . . . . . . . . . 15

11. EUROPEAN GUARANTEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler –
features you might not find on ordinary appliances. Please spend a few minutes reading to get
the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

Register your product for better service:

www.aeg.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information
General information and tips
Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, careful­ly read the supplied instructions. The manufacturer is
not responsible if an incorrect installation and use cau­ses injuries and damages. Always keep the instructions
with the appliance for future reference.

1.1 Children and vulnerable people safety

WARNING!

Risk of suffocation, injury or permanent disability.

• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they are supervised by an adult or a
person who is responsible for their safety.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep children and pets away from the appliance
when it operates or when it cools down. Accessible
parts are hot.

• If the appliance has a child safety device, we recom­mend that you activate it.

• Cleaning and user maintenance shall not be made by
children without supervision.

ENGLISH 3

1.2 General Safety

• The appliance and its accessible parts become hot
during use. Do not touch the heating elements.

• Do not operate the appliance by means of an exter­nal timer or separate remote-control system.

• Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.

www.aeg.com

4

• Never try to extinguish a fire with water, but switch off
the appliance and then cover flame e.g. with a lid or a
fire blanket.

• Do not store items on the cooking surfaces.

• Do not use a steam cleaner to clean the appliance.

• Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.

• If the glass surface is cracked, switch off the appliance
to avoid the possibility of electric shock.

2.

SAFETY INSTRUCTIONS

This appliance is suitable for the
following markets: IE

GB

2.1 Installation

WARNING!

Only a qualified person must in­stall this appliance.

• Remove all the packaging.

• Do not install or use a damaged appli-

ance.

• Obey the installation instruction sup-

plied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always be careful when you move the

appliance because it is heavy. Always
wear safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This pre­vents hot cookware to fall from the ap­pliance when the door or the window
is opened.

• If the appliance is installed above

drawers make sure that the space, be­tween the bottom of the appliance
and the upper drawer, is sufficient for
air circulation.

• The bottom of the appliance can get
hot. We recommend to install a non­combustile separation panel under the
appliance to prevent access to the
bottom.

If, you use the accessory frame C­FRAME, first read the instruction sup­plied with the frame before you install
the appliance.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections must be
made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation
make sure that the appliance is dis­connected from the power supply.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable
tangle.

• Make sure the mains cable or plug (if
applicable) does not touch the hot ap­pliance or hot cookware, when you
connect the appliance to the near
sockets

• Make sure the appliance is installed
correctly. Loose and incorrect electrici­ty mains cable or plug (if applicable)
can make the terminal become too
hot.

• Make sure that a shock protection is
installed.

• Use the strain relief clamp on cable.

• Make sure not to cause damage to the
mains plug (if applicable) or to the
mains cable. Contact the Service or an
electrician to change a damaged
mains cable.

• The electrical installation must have an
isolation device which lets you discon­nect the appliance from the mains at
all poles. The isolation device must
have a contact opening width of mini­mum 3 mm.

• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.

Gas connection

• All gas connections should be made
by a qualified person.

• Before installation, make sure that the
local distribution conditions (nature of
the gas and gas pressure) and the ad­justment of the appliance are compat­ible.

• Make sure that there is air circulation
around the appliance.

• The information about the gas supply
is on the rating plate.

• This appliance is not connected to a
device, which evacuates the products
of combustion. Make sure to connect
the appliance according to current in­stallation regulations. Pay attention to
requirements regarding adequate
ventilation.

2.2 Use

WARNING!

Risk of injury, burns or electric
shock.

• Remove all the packaging, labelling
and protective film (if applicable) be­fore first use.

• Use this appliance in a household en­vironment.

• Do not change the specification of this
appliance.

• Do not let the appliance stay unatten­ded during operation.

ENGLISH 5

• Do not operate the appliance with wet
hands or when it has contact with wa­ter.

• Do not put cutlery or saucepan lids on
the cooking zones. They become hot.

• Set the cooking zone to “off” after
use.

• Do not use the appliance as a work
surface or as a storage surface.

• If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.

• When you place food into hot oil, it
may splash.

WARNING!

Risk of fire or explosion.

• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.

• The vapours that very hot oil releases
can cause spontaneous combustion.

• Used oil, that can contain food rem­nants, can cause fire at a lower tem­perature than oil used for the first
time.

• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.

WARNING!

Risk of damage to the appliance.

• Do not keep hot cookware on the con­trol panel.

• Do not let cookware to boil dry.

• Be careful not to let objects or cook­ware fall on the appliance. The surface
can be damaged.

• Do not activate the cooking zones
with empty cookware or without cook­ware.

• Do not put aluminium foil on the ap­pliance.

• Cookware made of cast iron, alumini­um or with a damaged bottom can
cause scratches on the glass or glass
ceramic. Always lift these objects up
when you have to move them on the
cooking surface.

• This appliance is for cooking purposes
only. Do not use the appliance for oth-

www.aeg.com

6

er purposes, as for example room
heating.

• The use of a gas cooking appliance re­sults in the production of heat and
moisture. Provide good ventilation in
the room where the appliance is instal­led.

• Make sure that the ventilation open­ings are not blocked.

• Prolonged intensive use of the appli­ance may call for additional ventila­tion, for example opening of a win­dow, or more effective ventilation, for
example increasing the level of me­chanical ventilation where present.

• Use only stable cookware with the cor­rect shape and diameter larger than
the dimensions of the burners. There
is a risk of overheating and rupture of
the glass plate (if applicable).

• Make sure the flame does not go out
when you quickly turn the knob from
the maximum to the minimum posi­tion.

• Make sure pots are centrally posi­tioned on the rings and do not stick
out over edges of the cooking surface.

• Use only the accessories supplied with
the appliance.

• Do not install a flame diffuser on the
burner.

2.3 Care and Cleaning

WARNING!

Risk of damage to the appliance.

• Clean regularly the appliance to pre­vent the deterioration of the surface
material.

• Do not use water spray and steam to
clean the appliance.

• Do not clean the burners in the dish­washer.

• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal ob­jects.

2.4 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for
information on how to discard the ap­pliance correctly.

• Disconnect the appliance from the
mains supply.

• Cut off the mains cable and discard it.

• Flat the external gas pipes.

3. PRODUCT DESCRIPTION

3.1 Built-in Gas Hob Class 3

Cooking surface layout

1

2

3

4

Rapid burner (pot size:

1

140mm-240mm)
Semi rapid burner (pot size:

2

160mm-240mm)
Glass bar

3

Control knobs

4

ENGLISH 7

3.2 Control knob

Symbol Description

4. DAILY USE

WARNING!

Refer to the Safety chapters.

4.1 Ignition of the burner

WARNING!

Be very careful when you use
open fire in kitchen environment.
Manufacturer decline any re­sponsibility in case misuse of the
flame

Always light the burner before
you put cookware.

To light the burner:

no gas supply /
off position

ignition posi­tion / maximum
gas supply

Symbol Description

minimum gas
supply

1.

Turn the control knob counterclock­wise to the maximum position (

and push it down.

2.

Keep the control knob pushed for
approximately 5 seconds; this will let
thermocouple to warm up. If not, the
gas supply will be interrupted.

3.

Adjust the flame after it is regular.

If after some tries the burner
does not light, check if the crown
and its cap are in correct posi­tions.

)

www.aeg.com

8

Burner cap and crown

1

Thermocouple

2

Ignition candle

3

WARNING!

Do not keep the control knob
pushed for more than 15 sec­onds.
If the burner does not light after
15 seconds, release the control
knob, turn it into off position and
try to light the burner again after
minimum 1 minute.

In the absence of electricity you
can ignite the burner without
electrical device; in this case ap-

1

2

3

proach the burner with a flame,
push the relevant knob down
and turn it counter-clockwise to
maximum gas release position.

If the burner accidentally goes
out, turn the control knob to the
off position and try to light the
burner again after minimum 1 mi­nute.

The spark generator can start au­tomatically when you switch on
the mains, after installation or a
power cut. It is normal.

4.2 Turning the burner off

To put the flame out, turn the knob to
the symbol

.

WARNING!

Always turn the flame down or
switch it off before removing the
pans off the burner.

5. HELPFUL HINTS AND TIPS

WARNING!

Use pots and pans with bottom
applicable to the dimension of
burner.
Do not use cooking vessels on
the hotplate that overlap its
edges.

Burner Diameters of

Rapid 140 - 240 mm
Semi-

rapid

5.1 Energy savings

• If possible, always put the lids on the
pans.

cookware

160 - 240 mm

• When the liquid starts to boil, turn
down the flame to barely simmer the
liquid.

WARNING!

Cookware must not enter the
control zone.

Make sure pots do not protrude over the
edges of the cooktop and that they are
centrally positioned on the rings in order
to obtain lower gas consumption.
Do not place unstable or deformed
cookware on the ring.

6. CARE AND CLEANING

ENGLISH 9

WARNING!

Switch the appliance off and let it
cool down before you clean it.
Disconnect the appliance from
the electrical supply, before car­rying out any cleaning or mainte­nance work.

WARNING!

For safety reasons, do not clean
the appliance with steam clean­ers or high-pressure cleaners.

WARNING!

Do not use abrasive cleaners,
steel wool pads or acids, they
can cause damage to the appli­ance.

You can remove the pan supports to
easily clean the hob. After cleaning the
hob, make sure the pan supports are
correctly positioned. Pay attention when
you replace the pan supports to prevent
the glass hob top from scratching. When
you wash the pan supports by hand, take
care when you dry them as the enamel­ling process occasionally leaves rough
edges. If necessary, remove stubborn
stains using a paste cleaner.

Removing the dirt:

1.

– Remove immediately: melting

plastic, plastic foil, and food con­taining sugar. Use a special glass
ceramic scraper. Put the scraper
on the glass ceramic surface at an
acute angle and slide the blade
on the surface.

– Stop the appliance and let it

cool down before you clean: lime­scale rings, water rings, fat stains,
shiny metallic discolorations. Use a
special cleaner for glass ceramic
or stainless steel.

2.

Clean the appliance with a damp
cloth and some detergent.

3.

At the end rub the appliance dry
with a clean cloth.

6.1 Cleaning the ignition

candle

This model has a ceramic ignition candle
and a metal electrode. Keep these com­ponents well clean to prevent difficult
lighting and check that the burner crown
holes are not blocked.

6.2 Periodic maintenance

Periodically speak your local Service
Force Centre to check the conditions of
the gas supply pipe and the pressure ad­juster, if fitted.

WARNING!

Glass bar

• Do not use the scraper or sharp ob­jects to clean the glass bar and the
space between it and glass ceramic.
Glass bar is attached to the ceramic
plate.

• Do not put the pots on the glass bar.

• Make sure that the pans and pots do
not touch the glass bar.

www.aeg.com

10

7. TROUBLESHOOTING

Problem Possible cause Remedy

There is no spark when
lighting the gas

•Burner cap and crown

The flame is blow out im­mediately after ignition

The gas ring burns un­evenly

If there is a fault, first try to find a solu­tion to the problem yourself. If you can­not find a solution to the problem your­self, speak your dealer or the local Serv­ice Force Centre.

• There is no electrical
supply

are placed uneven

• Thermocouple is not
heated sufficient

• Burner crown is
blocked with food resi­dues

• Make sure that the
unit is connected and
the electrical supply is
switched on.

• Control the fuse. If the
fuse is released more
than one time, refer to
a qualified electrician.

• Make sure that the
burner cap and crown
are in correct posi­tions.

• After lightning the
flame, keep the knob
pushed for approxi­mately 5 seconds.

• Make sure that the in­jector is not blocked
and the burner crown
is clear of food parti­cles.

If you operated the appliance in­correctly, or the installation was
not carried out by a registered
engineer, the visit from the cus­tomer service technician or deal­er may not take place free of
charge, even during the warranty
period.

8. INSTALLATION

WARNING!

Refer to the Safety chapters.

Made in Switzerland

Qn (Hs): 4.9 kW
Butan: 350 g/h
AC 220-240 V 50/60 Hz

10

P<0,025 kW

0063

Adjusted for: G20 2H 2E 2E - 20 mbar

PIN 0063CL3451

Typ: 55 FED 04 GA

Before the installation, note
down the serial number (Ser. Nr.)
from the rating plate.The rating

plate of the appliance is on its
lower casing.

PNC: 941 560 826/00

Serie-Nr:

Mod.: HC412000GB

WARNING!

The following instructions about
installation, connection and
maintenance must be carried out
by qualified personnel in compli­ance with standards and local
regulations in force.

8.1 Gas Connection

Make sure that during the installation
the appliance is not connected to elec­trical supply. Disconnect the mains plug
or deactivate the fuses. Disconnect the
mains gas supply.
Make sure that there is a stop tap as­sembled between the gas supply of
house and the appliance.
The settings for this appliance are loca­ted on the rating plate. The present set­tings for the type of gas and gas pres­sure are on a sticker
Choose fixed connections or use a flexi­ble pipe in stainless steel in compliance
with the regulation in force. If you use
flexible metallic pipes, be careful they
do not come in touch with mobile parts
or they are not squeezed. Also be care­ful when the hob is put together with an
oven.
This appliance is not connected to an
exhaust gas outlet. It must be connected
in accordance with the installation condi­tions that apply. Pay special attention to
correct airflow.

ENGLISH 11

Make sure that the gas supply
pressure of the appliance obeys
the recommended values. The
adjustable connection is fixed to
the comprehensive ramp by
means of a threaded nut G 1/2".
Screw the parts without force,
adjust the connection in the nec­essary direction and tighten ev­erything.

ABC

A)

End of shaft with nut

B)

Gasket

C)

Elbow

WARNING!

After installation always check
the tightness of the connections
using a soap solution. Never use

a flame to check the tightness.

Flexible nonmetal pipes
connection:

If it is possible to easily control the con­nection in its full area, you can use a flex­ible pipe. Tightly attach the flexible pipe
by clamps.
Liquid gas: use the rubber pipe holder.
Always engage the gasket. Then contin­ue with the gas connection. The flexible
pipe is prepared for apply when:

– it is no longer than 1500 mm;
– it shows no throttles;
– it is not subject to traction or torsion;
– it does not get in touch with cutting

edges or corners;

– it can be easily examined in order to

check its condition.
The control of preservation of the flexi­ble pipe consists in checking that:

– it does not show cracks, cuts, marks of

burnings on the two ends and on its

full length;
– the material is not hardened, but

shows its correct elasticity;

www.aeg.com

12

– the fastening clamps are not rusted;
– expired term is not due.

If one or more defects are visible, do not
repair the pipe, but replace it.

When installation is complete,
make sure that the seal of each
pipe fitting is correct. Use a
soapy solution, not a flame!

8.2 Injectors replacement

1.

Remove the pan supports.

2.

Remove the caps and crowns of the
burner.

3.

With a socket spanner 7 remove the
injectors and replace them with the
ones which are necessary for the
type of gas you use.

4.

Assemble the parts, follow the same
procedure backwards.

5.

Replace the rating label (it is near
the gas supply pipe) with the one for
the new type of gas supply. You can
find this label in the package of the

BURNER NATURAL GAS

G20/20 mbar

injectors supplied with the appli­ance.

8.3 Adjustment of minimum
level

To adjust the minimum level of the burn­ers:

1.

Light the burner.

2.

Turn the knob on the minimum posi­tion.

3.

Remove the knob.

4.

With a thin screwdriver, adjust the
by-pass screw position.

A

A The by-pass screw

– If you change from natural gas

G20 20 mbar to liquid gas, fully
tighten the adjustment screw in.

– If you change from liquid gas to

natural gas G20 20 mbar, undo the
by-pass screw approximately 1/4
of a turn.

WARNING!

Make sure the flame does not go
out when you quickly turn the
knob from the maximum position
to the minimum position.

LPG

G30/30 mbar

Injectors Injectors

Rapid burner 119 88
Semi Rapid burner 96 71

8.4 Electrical connection

• Ground the appliance according to
safety precautions.

• Make sure that the rated voltage and
type of power on the rating plate
agree with the voltage and the power
of the local power supply.

• This appliance is supplied with a mains
cable.

• Any electrical component must be in­stalled or replaced by the Service
Force Centre technician or qualified
service personnel.

• Always use a correctly installed shock­proof socket.

• Make sure that there is an access to
the mains plug after installation.

• Do not pull the mains cable to discon­nect the appliance. Always pull the
mains plug.

• The appliance must not be connected
with an extansion cable, an adapter or
a multiple connection (risk of fire).
Check that the ground connection is
in conformity with the standard and
regulations force.

• The power cable must be placed in
such a way that it does not touch any
hot part.

• Connect the appliance to the mains
with a device that lets to disconnect
the appliance from the mains at all
poles with a contact opening width of

8.6 Assembly

min.
650mm

min.
450mm

ENGLISH 13

minimum 3 mm, eg. automatic line
protecting cut-out, earth leakage trips
or fuse.

• None of a parts of the connection ca­ble can not get a temperature 90°C.

8.5 Replacement of the

connection cable

In order to replace the connection cable
speak your local Service Force Centre!
To replace the connection cable use on­ly H05BB-F Tmax 90°C (or higher) type.
Make sure that the cable section is appli­cable to the power and the working tem­perature. The yellow/green earth wire
must be approximately 2 cm longer than
all phase wires.

55mm

R 5mm

490

+1

mm

340+1mm

www.aeg.com

14

min. 20 mm

min.
30 mm

• Seal the gap between the worktop
and glass ceramic with silicone.

• Put some soapy water on the silicone.

• Pull off the excess silicone with the
scraper.

8.7 The installation of more

than one appliance

Added parts:connection bar(s), heat re­sistant silicon, rubber shape, sealing
strap.

+-=

580 mm

520 mm

The installation of more than one appli­ance

1.

Put down the dimension of the work­top cut out and saw it out.

2.

Put the appliances one at time on
some soft surface, a blanket for ex­ample, with the bottom side up.

3.

Put the seal stripe around the lower
edge of the appliance along the out­er edge of the glass ceramic.

4.

Loosely screw the fixing plates into
the appropriate holes in the protec­tive casing.

5.

Put the first appliance in the worktop
cut out. Put the connection bar in
the worktop cut out and push up
half of the width against the appli­ance.

360 mm

Only use special a heat - resistant
silicon.

The worktop cut out

Distance from the wall : minimum 50 mm
Depth : 490 mm
Width : sum widths of all the appliances
to be built-in and subtract 20 mm (see
also "Overview of all appliance widths" )
Example :

20 mm 920 mm

490 mm

6.

Loosely turn in fixing plates from be­low on the worktop and on the con­nection bar.

7.

Put the subsequent appliance in the
worktop cut out . Make sure that the
front ends of the appliances are on
the same level.

8.

Tighten the fixing plate / retaining
grip screws.

9.

Seal the gap between the worktop
and appliances and between appli­ances with silicone.

9. TECHNICAL INFORMATION

Burner powers

Burner / Type of
gas

Rapid burner 3,0 kW 2,8 kW 2,8 kW
Semi Rapid burn-er1,9 kW 2,0 kW 1,9 kW

Natural gas Town gas Liquid gas

ENGLISH 15

10.

Put some soapy water on the silicon.

11.

Press the rubber shape with some
strength against the glass ceramic
and move it slowly along the space.

12.

Do not touch the silicon until it be­come hard, it can last about a day.

13.

Carefully remove silicon that came
out with a shaving blade.

14.

Clean glass ceramic fully.

Total power 4,9 kW 4,8 kW 4,7 kW / 350 g / h

10. GB IE GREAT BRITAIN & IRELAND - GUARANTEE/

CUSTOMER SERVICE

10.1 Standard guarantee

conditions:

We, Electrolux, undertake that if within
12 months of the date of the purchase
this Electrolux appliance or any part
thereof is proved to be defective by rea­son only of faulty workmanship or mate­rials, we will, at our option repair or re­place the same FREE OF CHARGE for la-

bour, materials or carriage on condition
that:

• Appliance has been correctly installed
and used only on the electricity supply
stated on the rating plate.

• Appliance has been used for normal
domestic purposes only, in accord­ance with manufacturer's instructions.

• Appliance hasn't been serviced, main­tained, repaired, taken apart or tam-

www.aeg.com

16

pered with by person not authorised
by us.

• Electrolux Service Force Centre must
undertake all service work under this
guarantee

• Any appliance or defective part re­placed shall become the Company's
property.

• This guarantee is in addition to your
statutory and other legal rights.

Exclusions

• Damage, calls resulting from trans­port, improper use, neglect, light
bulbs, removable parts of glass, plas­tic.

• Costs for calls to put right appliance
which is improperly installed, calls to
appliances outside United Kingdom.

• Appliances found to be in use within a
commercial environment, plus those
which are subject to rental agree­ments.

• Products of Electrolux manufacturer
that are not marketed by Electrolux

Service and Spare Parts.Please contact
your local Service Force Centre: 08445
616 616(Call will be routed to Service
Force Centre covering your postcode
area). For address of local Service Force
Centre and further information, please
visit: www.serviceforce.co.uk Before
calling out an engineer, please ensure
you have read the details under the
heading "What to do if... / Trouble­shooting". When you contact the Service
Force Centre you will need to give the

following details: Your name, address
and postcode, your telephone number,
clear concise details of the fault, model
and serial number of the appliance
(found on the rating plate), the purchase
date. Please note a valid purchase re­ceipt or guarantee documentation is re­quired for in guarantee service calls.

Customer Care.Please contact our Cus­tomer Care Department: Electrolux Ma­jor Appliances, Addington Way, Luton,
Bedfordshire, LU4 9QQ or visit our web­site at www.electrolux.co.uk

Custom­er Care
Depart-

Tel: (Calls may be recor­ded for training purpo­ses)

ment,

Electro-

08445 613 613

lux
AEG-

08445 611 611
Electro­lux

Zanussi-

08445 612 612
Electro­lux

For Customer Service in The
Republic of Ireland please
contact us at the address
below:

Electrolux Group (Irl) Ltd, Long Mile
Road, Dublin 12, Republic of Ireland
Tel: [phone], Email: serv­[e-mail]

11. EUROPEAN GUARANTEE

GB

This appliance is guaranteed by
Electrolux in each of the countries listed
at the back of this user manual, for the
period specified in the appliance guar­antee or otherwise by law. If you move
from one of these countries to another
of the countries listed, the appliance
guarantee will move with you subject to
the following qualifications:-

• The appliance guarantee starts from
the date you first purchased the appli­ance which will be evidenced by pro­duction of a valid purchase document
issued by the seller of the appliance.

• The appliance guarantee is for the
same period and to the same extent
for labour and parts as exists in your
new country of residence for this par­ticular model or range of appliances.

• The appliance guarantee is personal
to the original purchaser of the appli­ance and cannot be transferred to an­other user.

• The appliance is installed and used in
accordance with instructions issued by
Electrolux and is only used within the
home, i.e. is not used for commercial
purposes.

12. WWW.ELECTROLUX.COM

ENGLISH 17

• The appliance is installed in accord­ance with all relevant regulations in
force within your new country of resi­dence.

The provisions of this European Guaran­tee do not affect any of the rights gran­ted to you by law.

Albania [phone] Rruga “Kavajës”, ish-parku auto-

buzëve, Tiranë

Belgique/België/Bel­gien

[phone] Raketstraat 40, 1130 Brussel/

Bruxelles

Česká Republika [phone] Budějovická 3, Praha 4, 140 21

Danmark [phone] Strevelinsvej 38-40, 7000 Frederi-

cia

Deutschland [phone] Fürther Str. 246, 90429 Nürnberg

Eesti [phone] Pärnu mnt. 153, 11624 Tallinn

España [phone] Carretera M-300, Km. 29,900 Al-

calá de Henares Madrid

France 08 92 68 24 33

www.electrolux.fr

(0.34€/min)

Great Britain [phone] Addington Way, Luton, Bedford-

shire LU4 9QQ

Hellas [phone], Limnou Str., 54627 Thessaloni-

ki

Hrvatska [phone] Slavonska avenija 3, 10000 Za‐

greb

Ireland [phone] Long Mile Road Dublin 12
Italia [phone] Corso Lino Zanussi, 30 - 33080

Porcia (PN)

Latvija [phone] Kr. Barona iela 130/2, LV-1012,

Riga

Lietuva [phone] Ozo 10a, LT-08200 Vilnius

Luxembourg [phone] Rue de Bitbourg, 7, L-1273

Hamm

Magyarország (06-1)467-3205

[phone]

H-1142 Budapest XIV, Erzsébet
Királyné útja 87

www.aeg.com

18

Nederland [phone] Vennootsweg 1, 2404 CG - Al-

phen aan den Rijn
Norge [phone] Risløkkvn. 2 , 0508 Oslo
Österreich 0810 955030 Herziggasse 9, 1230 Wien

Polska [phone] ul. Kolejowa 5/7, 01–217 Wars‐

zawa

Portugal [phone] Quinta da Fonte - Edifício Gon-

çalves Zarco - Q 35 -2774-518

Paço de Arcos

Romania [phone] Str. Garii Progresului 2, S4,

040671 RO

Schweiz - Suisse ­Svizzera

0848 848 111 Industriestrasse 10, CH-5506 Mä-

genwil

Slovenija [phone] Gerbičeva ulica 110, 1000 Ljubl‐

jana
Slovensko [phone]

34-5

Electrolux Slovakia s.r.o., Elec‐

trolux Domáce spotrebiče SK,

Galvaniho 17/B, 821 04 Bratisla‐

va

Suomi 030 600 5200

Lankapuhelinverkosta 0,0828€/puhelu+0,032€/min Matkapuhelinver­kosta 0,192€/min

Sverige [phone] Electrolux Service, S:t Göransga-

tan 143, S-105 45 Stockholm

Türkiye [phone] Tarlabaşı caddesi no : 35 Tak‐

sim İstanbul
Россия 8-800-200-3589 129090 Москва, Олимпийский

проспект, 16, БЦ "Олимпик"
Україна [phone] 04074 Київ,

вул.Автозаводська, 2а, БЦ

"Алкон"

13. ENVIRONMENT CONCERNS

Recycle the materials with the
symbol
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic

. Put the packaging in

appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.

ENGLISH 19

www.aeg.com/shop

892934850-E-212013