CYLINDERS
4024, 4025, 4026 CYLINDER PULLS |
C-1 |
|
|
4024, 4025, 4026 Cylinder Pulls
ANSI/BHMA 156.5–2010 E 19231
The 4024, 4025, 4026 Cylinder Pulls are designed to operate Adams Rite MS1847 Deadlocks and the 5017 Wood Door Deadlock.
4024 Cylinder Pull
The 4024 five pin tumbler cylinder is smaller than the 4025 Cylinder Pull and it is symmetrical, designed for mounting door pull or other trim plate. Can be mounted directly on stile where lock mechanism is mounted on inside surface of stile rather than mortised.
4025 Cylinder Pull
The 4025 five pin tumbler cylinder has mounting holes spaced to allow clearance around MS1847 Deadlock mechanism for long through-the-stile mounting screws.
Function
Designed for use with Adams Rite MS1847 Deadlocks and 5017 Wood Door Deadlock, these surface mounted pulls allow a sliding glass door to be keyed-in with other types of doors which have key-in-knob or mortise cylinder locks.
4026 Cylinder Pull
A five pin tumbler cylinder, the 4026 Cylinder Pull is designed for use with 5017 Wood Door Deadlock for wood door applications.
Specifications
TRIM FINISH
• Zinc alloy housing. Standard finish: 130. Cylinders are brass.
CYLINDER BOTH SIDES
• A pair of 4025 Cylinder Pulls can be mounted opposite each other with long machine screws. Security is maintained since each side offers access to only one screwhead. Both screws would have to be removed to operate the lock without its key. Specify 4025 CYLxCYL set.
OPTIONS
• CYLINDER MAKE: Pulls available with Schlage or Weiser Keyway cylinders.
4025
4024
4025 CYL X CYL
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
ARM-014-9/14 |
www.adamsrite.com |
|