Adams Rite MS1950-250-628, MS1950-250-335, MS1950-210-313, MS1952-356-628, MS1952-315-335 Specsheet
...
Deadlocks
MS1950-050 Series MS® Deadlock |
DL-25 |
|
|
MS1950-050
Series MS® Deadlock
ALUMINUM |
GRADE 1 |
|
E8281/E8291 |
The stainless steel MS1950-050 Deadlock utilizes a laminated stainless steel hookbolt, activated by a pivot mechanism to provide maximum security for a single leaf narrow stile door.
Function
The MS1950-050 Deadlock answers the security need of sliding doors in commercial, industrial, and institutional buildings. The mechanism is identical to the widely used Maximum Security swinging door lock, except that the massive laminated bolt is provided in a hook shape to resist the parting motion of sliding door and jamb. The over-center MS locking action assures that forced entry attempts to pry the door in any direction, up, down, or sideways, will be defeated.
Operation
360° turn of key or thumbturn throws or retracts the counterbalanced bolt. Key can be removed only when bolt is in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder or thumbturn from either or both sides. Cylinder must have MS® dimensioned cam.
Specifications
Cylinder Backset
• 31/32", 1-1/8", or 1-1/2" only.
Case
•Fully stainless steel case and internal components, measures 1" x 6" x depth. Depth varies by backset (see table on back of page).
Bolt
•5/8" x 1-3/8" with 13/16" throw. Eight-ply laminated stainless steel. Center ply has alumina-ceramic core to defeat any hacksaw attack, including rod-type “super” hacksaws, while hook shape repels pry bar attempts to “spread” the door from its jamb or lift it off its track.
Faceplate
• Measures 1" x 6-7/8".
Strike
•See back page for dimensions of strike slot which can be cut in metal jamb. Trim plate, box strike, and armored strike are available separately.
Cylinder Cam
•MS1950-050 Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with MS® cam dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS section for cylinder make, thumbturn and trim ring information.
“Dim A” .800" ± .005"
20.3mm ± .127mm
.120" |
|
|
|
|
|
.182" |
|
3.0mm R |
|
|
|
||||
|
|
|
|
|
|
|
4.6mm |
|
|
|
|
|
|
|
|
Options
•Cylinder backset and faceplate finish and shape (radiused, flat or bevel cross-section to match door nose) must be specified. “SCHOOLHOUSE” version, also available, is modified so that operation from inside is “unlock only”. This lock is handed and must be specified LH or RH. Specify Series SCH1950-050. Same faceplate and backset options as Series MS1950-050. Operation from inside, with standard Adams Rite 4066 Turn or with 4550 Deadlock Lever. For wood or hollow metal, see MS1850SN.
Standard Package
•Individually boxed with machine screws for mounting. Cylinders and/or thumbturns available separately. Shipping weight: 1-1/2 lbs.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
ARM-014-9/14 |
www.adamsrite.com |
|
Loading...