Deadlocks
MS1847 Series MS® Deadlock/Deadlatch |
DL-7 |
|
|
MS1847 Series MS®
Deadlock/Deadlatch
FULL GLASS |
ALUMINUM |
GRADE 1 |
|
|
E8291 |
|
|
|
The MS1847 Deadlock/Latch for ultra-narrow stile siding doors features a self-protecting bolt with adjustable
bolt projection.
Function
A compact lock designed to fit within very narrow sliding door stiles without compromising the high degree of security these doors need. The sturdy stainless steel bolt has two important features not usually found in sliding door hardware. First, it is adjustable: a full 3/16" lengthening or shortening of bolt projection is possible by turning an exposed screw in the face of the lock. This can compensate for considerable misalignment between door and jamb. Second, the MS1847 bolt is self-protecting: if the door is closed with the bolt in the locked position, the bolt will retract immediately on contact with the jamb, thus preventing damage or accidental lock-out.
MS1847
MS1847-02
Operation
Can be operated by a standard cylinder, so the glass door may be keyed-in with other types of doors. Three hub slot positions allow installation even where jamb and stile design provides severely limited turn clearance.
Specifications
Latch Version
•The same stainless steel hookbolt, but spring-loaded for automatic latching, is provided by the MS1847-11 and MS1847-13. All dimensions and available accessories for the MS1847 deadlocks also apply to MS1847 deadlatches.
Case
• Stainless steel, measures 1/2" x 3-3/16" x 1-1/8".
Anti-Lift Bolt
•Three-ply laminated stainless steel. Designed to withstand approximately one-half ton force, either horizontal or vertical. Anti-lift bolt stops both door-from-jamb pry bar attacks and attempts to lift the door from its track.
Face
•Rectangular or full radiused ends (see table on back of page for dash numbers).
Standard Package
•Case-packed with machines screws for mounting. Shipping weight: 1/3 lb.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
ARM-014-9/14 |
www.adamsrite.com |
|