Page 1
Weather Station Display Specifications
Indoor
Temperature
Range
32 to 122 degrees Fahrenheit; 0 to 50 degrees
Celsius
Temperature
Accuracy
+/- 2 degrees Fahrenheit;
Indoor Humidity
Range
1% to 99% Relative Humidity
Humidity
Accuracy
+/- 5% from 0% to 10% Relative Humidity
+/- 4% from 10% to 20% Relative Humidity
+/- 3% from 20% to 80% Relative Humidity
+/- 4% from 80% to 90% Relative Humidity
+/- 5% from 90% to 100% Relative Humidity
Time Zones
HAST, AKST, EST, PST, MST, CST, EST, AST
Power
5V power adapter (included; recommended for
optimal display color), 3 AA alkaline (optional; not
included)
Dimensions
4.5-inch Height x 6.6-inch Width x 1.6-inch Depth
Temperature
Range
-40 to 158 degrees Fahrenheit; -40 to 70 degrees Celsius
Temperature
Accuracy
+/- 2 degrees Fahrenheit
Humidity Range
1% to 99% Relative Humidity
Humidity Accuracy
+/- 5% from 0% to 10% Relative Humidity
+/- 4% from 10% to 20% Relative Humidity
+/- 3% from 20% to 80% Relative Humidity
+/- 4% from 80% to 90% Relative Humidity
+/- 5% from 90% to 100% Relative Humidity
Wireless Range
330 feet; 100 meters depending on home construction materials
Wireless Signal
433 MHz
Power
2 AA alkaline or lithium* batteries (not included)
*Lithium batteries recommended for temperatures below -4 degrees
Fahrenheit / -20 degrees Celsius
Wireless Temperature and Humidity Sensor
Page 2
Data Reporting
16 second updates
Dimensions
4.8-inch Height x 1.6-inch Width x 0.9-inch Depth
Page 3
Troubleshooting
Problem
Possible Solution
Outdoor
temperature
is flashing
or
showing
dashes
Flashing of the outdoor temperature is generally an indication of
wireless interference.
1.
Bring both the sensor and display unit indoors and remove at
least one battery from each.
2. Make sure the A-B-C switch on both units match. Sometimes
changing to a different channel can help.
3. Reinstall the battery in the outdoor sensor.
4. Reinstall the battery in the display unit.
5.
Let the units sit within a couple feet of each other for about 20
minutes to gain a strong connection.
No outdoor
sensor
reception
If the wireless signal indicator shows no bars:
•
Relocate the display unit and/or the outdoor sensor. The units
must be within 330 ft (100 m) of each other.
•
Make sure both units are placed at least 3 feet (.9 m) away from
electronics that may interfere with the wireless communication
(such as TVs, microwaves, computers, etc).
•
Use standard alkaline batteries (or lithium batteries in sensor
when temperature is below -4ºF/-20ºC). Do not use heavy duty
or rechargeable batteries. NOTE: It may take up to 20 minutes
for display unit and sensor to synchronize after batteries are
replaced.
Inaccurate
forecast
•
Weather Forecast icon predicts conditions for the next 12 to 24
hours, not current conditions.
•
Has Learning Mode icon disappeared from the display unit?
Learning Mode must complete before forecast and pressure will
be accurate.
•
Allow unit to run continuously for 33 days. Battery removal or
resetting the display unit will restart Learning Mode. After 14
days, forecast should be fairly accurate, however Learning Mode
calibrates for a total of 33 days.
Inaccurate
temperature
•
Make sure both the display unit and sensor are placed out of
Page 4
DISPLAY
or
humidity
direct sunlight and away from any heat sources or vents.
• Make sure both units are positioned away from moisture areas.
Display
screen
not working
•
Check that the batteries are installed correctly. Batteries may
need to be replaced.
•
Reset the display by pressing the RESET button, located on the
back of the display unit. Date and time will need to be entered
after a reset.
Dimensions: 4.5-inch Height x 6.6-inch Width x 1.6-inch Depth
Time Zones: HAST, AKST, EST, PST, MST, CST, EST, AST
Data Reporting: Indoor data: 30 second updates
Loading...