Instruction Manual
Digital Kitchen Scale
model 00930 / 00949
CONTENTS
Package Contents .................. 2
Customer Support .................. 2
Features & Benets ................. 3
Setup .................................... 4
Install or Replace Battery ........ 4
Using the Scale ...................... 5
Troubleshooting ..................... 7
Care & Maintenance .............. 7
Specications ......................... 7
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Package Contents
1. Scale
2. Measuring cup
3. Instruction Manual
Customer Support
AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this
product available and contact us in any of the following ways:
(877) 221-1252 info@chaney-inst.com
24/7 support at www.AcuRite.com
► Installation Videos ► Register your Product
► Instruction Manuals ► Support User Forum
► Replacement Parts ► Submit Feedback & Ideas
2
Features & Benets
FRONT
DISPLAY
17
16
15
14
8
7
13 12
FRONT
1
1. Measuring Cup
2. Display
3. POWER / ZERO Button
Powers the scale ON or OFF,
2
and used for Tare function.
4. MODE Button
3
4
5
6
Toggle between standard,
water, milk, oil and our
weighing modes.
5. UNIT Button
Toggle measurement units
between grams (g), pounds
(lb:oz), uid ounces ('oz),
cups (CUP).
6. Scale
DISPLAY
7. Indicates Oil Weighing
Mode is Selected
8. Volume Units ('oz)
9
10
11
Weight displayed in uid
ounces.
9. Indicates Flour Weighing
Mode is Selected
10. Volume Units (CUP)
Weight displayed in cups.
11. Weight Units (g)
Weight displayed in grams.
12. Indicates Milk Weighing
Mode is Selected
13. Weight Units (lb:oz)
Weight displayed in pounds
and ounces.
14. Indicates Water Weighing
Mode is Selected
15. Tare Indicator
16. Current Weight
17. Volume Units (ml)
Weight displayed in
milliliters.
3
SETUP
CR2032
+
Install or Replace Battery
1. Remove the battery compartment cover.
2. Pull the plastic tab below the battery (if applicable) to remove and discard
the tab.
3. Insert 1 x 3V CR2032 lithium battery into the battery compartment, as
shown. Follow the polarity (+/-) diagram in the battery compartment.
4. Replace the battery cover.
Remove
1
Battery Cover
Remove
2
plastic tab
CR2032
+
Install Battery
3
1 x 3V CR2032
lithium battery
4
OPERATION
Using the Scale
Measure Weight
1. Place the scale on a at, stable surface.
2. Press the " " button to power the scale ON.
3. Wait for the display to show "0:00".
4. Press the "M" (MODE) button to toggle between weighing modes*.
Weighing modes include: STANDARD (default), WATER, MILK, OIL,
FLOUR
5. Press the "U" (UNIT) button to select your preferred measurement units.
Standard mode measures weight in grams (g) or pounds and ounces
(lb:oz). Water, milk, and oil modes measure weight in milliliters (ml), uid
ounces ('oz) or cups (CUP). Flour mode measures weight in cups (CUP).
6. Place item(s) to be weighed into the measuring cup.
7. Weight will be shown on the display.
*It is important to select the correct mode because different items have
varying densities.
Tare Function
To measure items as they are added, use the Tare Function.
1. Place an item in the measuring cup.
2. Weight will be shown on the display.
3. Without removing the item, press the " " button to reset display to
"0:00".
4. You will see the Tare indicator "T" on the display.
5. With the rst item still in place, add the next item to the measuring cup.
The display will now show the weight of that item.
6. Press the " " button again to reset the display to "0:00" and add
another item. Repeat steps 5-6 until all items have been added.
7. To view the combined weight of all items, press the " " button again and
total weight will be displayed.
5
Warning Messages
Replace battery (see page 4).
Maximum weighing capacity has been exceeded.
Remove items to prevent damage.
Power the Scale ON/OFF
Press the " " button to power the scale on. The scale will automatically power
off when the display shows "0:00" or the same weight for 30 seconds. To
power off, press the " " button when the display is showing "0", or press
and HOLD the " " button for 3 seconds when a weight is being shown on the
display.
Storage
The scale should be stored in a cool, dry place.
6
Troubleshooting
Problem Possible Solution
Display screen
not working
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
Care & Maintenance
Store in a dry location at room temperature. Clean with a soft, damp cloth.
DO NOT immerse scale in water or use caustic cleaners or abrasives. All parts
should be wiped clean immediately after direct contact with foods, especially
after contact with fat, spices or vinegar. Avoid contact with acids and citrus
juices. DO NOT place on or near hot surfaces. Use the scale on a hard, at
surface. DO NOT strike, shake or drop the scale. Scale is not designed for
commercial use.
Specications
MAX WEIGHT CAPACITY
POWER
5 kg / 11 lbs
3V CR2032 lithium battery
7
Weather
Stations
Temperature
& Humidity
Weather
Alert Radio
Kitchen
Thermometers
& Timers
Clocks
It’s more than accurate, it’s
AcuRite offers an extensive assortment of precision instruments,
designed to provide you with information you can depend on to
Plan your day with condence
.
™
www.AcuRite.com
Printed in China
00930 INST 010214
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark
of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and
copyrights are the property of their respective owners. AcuRite uses patented
technology. Visit www.AcuRite.com/patents for details.
Loading...