ACCO EX12-05 Instruction Manual
GBC EX12-05 12-Sheet
Level P-4 Cross-Cut
Shredder - 1757390
Instruction Manual
TM/MC
EX12-05
Instruction Manual
Manuel d’utilisation
Manual de instrucciones
To register this product go to www.swingline.com
Pour enregistrer ce produit allez sur www.swingline.com
Para registrar este producto vaís en www.swingline.com
TM/MC
English 3
Français 7
Español 11
2
I
F
A
D
B
C
J
H
Description of product parts
G
E
A
On/off button (at rear of machine)
B
Important safety symbols
C
Paper and credit card entry slot
D
CD entry slot
E
Auto button
F
Reverse button
G
Continuous forward function
H
Pull out bin with viewing window
I
Cool down (red light)
J
CD Bin (not shown)
3
TM/MC
Introduction
Thank you for choosing this shredder from Swingline. We
are sure it will serve you well. Please take a little time to read
these instructions to ensure you get the best out of
your machine.
Safety First
• Please store this instruction manual in a safe place for future
reference.
• Please pay close attention to the safety symbols on the top of
the shredder and operate the machine accordingly.
• If the shredder needs cleaning, unplug the unit from the
power socket and use a damp cloth. Do not use any cleaning
products to clean the unit.
• Do not position the unit near to an object that radiates heat.
• Do not place the unit in a damp environment.
• Take care not to splash any liquid onto the machine.
• Return the product and proof of purchase with receipt to the
store at which it was purchased if…
- The power cable or plug is broken.
- The machine malfunctions because liquid was accidentally
spilt onto the machine.
- The shredder doesn’t operate despite following the
guidelines in the manual.
• Make sure the power cable isn’t a trip hazard.
• Please ensure the power supply is compatible with the
requirements of the machine (120V~60Hz).
•
Specifications
Swingline EX12-05
Cutting Type
Shred Size
Security Class
Sheet Capacity @ 80 gsm paper
Sheet Capacity @ 75 gsm paper*
Entry Width
Product Dimensions
Rated Voltage/Frequency
Rated Current
* 8.5” x 11”, 20lb., (75g) paper at 120V, 60Hz, 2 Amps. Heavier paper,
humidity or other than rated voltage my reduce capacity.
Confetti Cut
4 x 35mm
DIN S3
12 sheets
14 sheets
230mm
H405 x W225 x D420mm
120V~60Hz
2 amps
Lights and Icons Explained
Auto Cool Down
Color of LED Blue Red
Power On/Off Switch
Auto Mode light
Forward Mode light
Reverse Mode light
Cool Down Indicator light light
Sleep Mode
LEDs
• To avoid risk of injury, do not open the machine’s casing to
attempt DIY repair. Any attempted repair by an unqualied
person will invalidate the warranty.
DO NOT attempt to repair shredder yourself.
•
KEEP OUT OF REACH OF CHILDREN.
4
Shredder Control Panel
Auto
Safety First
This means you should be careful because long hair can
become entangled in the cutting head.
This means don’t reach into the feed opening of the
cutting head.
This means be careful of ties and other loose clothing
which could become entangled in the cutting head.
This means keep children away from shredder.
This means be careful of loose jewelry which could
become entangeld in the cutting head.
This means no aerosols.
ReverseForward
Correct operating procedure
➊
Insert plug into the AC power socket.
➋
Check the shredder bin is fully closed.
➌
Push the Auto button (
use.
), the shredder is now ready for
Rare Occasions of Jamming
In the unlikely event of the shredder jamming, use the reverse
function to unblock the shredder (see Reverse function section).
Alternating between the reverse and continuous forward
functions will help unblock the feed area.
Over Heating
This means machine is cooling down.
Preparation before use
How to use the shredder correctly:
➊
Take care not to insert ngers, ties or other objects into the
entry slot of the shredder.
➋
Try to avoid laminating materials, plastic bags etc. from
being passed through the shredder. This will prevent
damage to the cutters.
➌
We recommend to remove staples and paperclips, avoid
laminating materials, plastic bags etc. from being passed
through the shredder. This will prevent damage to the
cutters.
➍
Do not shred wet paper as it can tangle in the cutters.
➎
Do not shred more than the stated sheet capacity in one
pass.
➏
Do not shred continuously for more than 3 minutes at a
time. Running the unit for too long may make the motor
overheat. If the motor over heats, allow it to cool down for at
least 30 minutes before resuming use.
➐
Do not use the reverse
Over use of the reverse (
shredded paper becoming jammed in the entry slot, which
will adversely affect the performance of the shredder.
)
(
function if it’s not necessary.
)
function can result in
If this product is used continuously for long periods of time the
shredder may overheat. If this occurs the thermometer symbol
on the indicator panel will illuminate.
When the shredder is ready to be used again the thermometer
symbol will not illuminate.
5
Loading...