3M MP8660 Quick Start Guide
MP8660 Quick Reference Setup Instructions
Cable Connections: Always turn power off when making any cable connections.
Technical Assistance & Product Information
1–800–328–1371
Internet: scvsdeps@mmm.com
RS-232
Cable
E 3M 1998 78–6970–8910–6
MP8660 Quick Reference Setup Instructions
Projector Packout
IDEO1).
Power Cord
(US, Euro, UK)
MP8660 Projector
3-Conductor
Video/Audio Cable
Remote
Remote Control
Transmitter
VGA Cable
(15-15 pin M/M)
Control T
Lens Cap
Video Cable
(S-Video mini DIN4-pin)
ransmitter
MAC Adaptor
Serial Mouse
Cable
Press STANDBY/ON to switch projector between projection and standby mode. In
. In
projection mode the lamp is ON
Press
BLANK to display a black background with no image. Press again to return the
standby mode the lamp is OFF.
image to the screen.
Press
MUTE to switch the audio sound ON or OFF.
Press
ZOOM (YB) to increase or decrease the size of the screen image.
Press
FOCUS (YB) to increase or decrease the sharpness of the screen image.
Press
VOLUME (YB) to adjust internal/external speaker volume.
Press
BACK LIGHT
Press
RGB to switch computer video input (RGB1 ⇒
Press
MENU to display the on–screen menus. Move the mini–joy stick up/down or
to light the remote buttons.
RGB2
⇒ RGB1).
left/right as needed to nagivate the menu options. Note: Press SELECT to choose the
option that is highlighted.
Press
SELECT (L)
to choose the highlighted menu option. Refer to On–Screen Menus in
Section 4.
Press
RESET to reset menu options to the factory default setting. Refer to On–Screen
Menus in Section 4.
s
Pres
VIDEO to s
witch between video input
s (
VIDEO1 ⇒ VIDEO
2 ⇒ V
Gender
Changer
PS/2 Adaptor
Cable
RCA to Stereo
mini jack
ADB Adaptor
Cable
Hexagon
Wrench
Projector Operation
When all cable connections are complete, turn on the projector
power first, then the power to the input sources.
1. Turn projector power “ON.” Main power switch is located on
backside of projector.
2. Remove lens cap.
3.
Press the ST
ANDBY/ON button. Power indicator turns
from amber to green
4. Power up input devices.
5.
Press the RGB or VIDEO button to select input device.
6.
Press the ZOOM +/– button to adjust image size.
7. Press the FOCUS +/– button to adjust image sharpness.
8. Press the VOLUME +/– button to adjust speaker volume.
9.
Press the MENU button to display and SELECT arrows to
select menu options.
10.To shutdown projector
, press ST
ANDBY/ON button. Power indicator
will turn from green to amber.
Navigating System Menus
Press the MENU button on the projector control panel or remote
control keypad to display the Main Menu. Press the up/down
arrows YB or move the mini–joy stick up/down to move
vertically within a menu, sub–menu or adjustment screen.
Press the left/right select arrows
panel or move the mini–joy stick left/right to move horizontally
within a sub–menu or adjustment screen.
Press the SELECT button on the control panel or the SELECT (L)
button on the remote to enter a selected adjustment screen.
RGB ONLY
SETUP
IMAGE
OPTION
SETUP
IMAGE
OPTION
SETUP
IMAGE
OPTION
BRIGHTNESS
CONTRAST
POSITION
PHASE
H SIZE
MAC MODE
MIRROR
NORMAL
H INVERT
V INVERT
H&V INVERT
LENS RETRACT
AUTO
MANUAL
SPECIAL
TEST SCREEN
FIRMWARE REV.
SVGA56
H XX.X KhZ
V XX.X KhZ
A " on the projector control
VIDEO ONLY
BRIGHTNESS
CONTRAST
COLOR
TINT
MESSAGE
ON
OFF
LANGUAGE
ENGLISH
FRENCH
SPANISH
GERMAN
LAMP TIMER
1000 Hours
AUTO OFF
YES
NO
PANEL
BLUE 00
GREEN 00
BEEP
ON
OFF
LANGUAGE
BOTH
FRONT
REAR
Projector
Control Panel
Loading...