3M MP225 User Manual

projector

operator's

guide

English

3M™ Mobile Projector MP225

2 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

Contents

Intended Use Statement .......................................................................... 4

Safety Information ................................................................................... 4

Safety Labels .......................................................................................... 7

Package Contents ................................................................................... 8

Parts ...................................................................................................... 9

Getting Started ..................................................................................... 10

Making Connections .............................................................................. 14

Basic Operating Instructions .................................................................. 18

Cleaning the Projector ........................................................................... 22

Troubleshooting .................................................................................... 23

Specifications ....................................................................................... 25

Limited Warranty ................................................................................... 27

English

© 2012 3M. All Rights Reserved.

3

3M™ Mobile Projector MP225

Intended Use Statement

English

The 3M Mobile Projector MP225 is designed to operate with the 3M specified
battery and 3M power adapter in normal office or home environments.

• 0˚–35˚C (32˚–95˚F)

• 10–80% RH (without condensation)

• 0–1829 m (0– 6000 feet) above sea level

The ambient operating environment should be free of airborne smoke, grease,
oil and other contaminants that can affect the operation or performance of the
projector.

Use of this product in adverse conditions will void the product warranty.

Safety Information

Please read, understand, and follow all safety information contained in these
instructions prior to the use of this projector. Retain these instructions for future
reference.

Explanation of Signal Word Consequences

m Warning:

m Caution:

 Warning:

Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury and/or property damage.

Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury and/or property damage.

Hazardous voltage

4 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

m Warning

To reduce the risk associated with hazardous voltage:

• Do not modify this product in any way. Use only 3M approved replacement
components.

• Do not attempt to service this projector other than battery replacement.
There are no user-serviceable parts other than the battery. Service to be
performed only by a 3M authorized service provider using 3M approved
system components.

• Do not use the wall power supply in a wet environment.

• Do not use with a damaged wall power supply. Replace damaged part prior

to use.

To reduce the risk associated with fire and explosion:

• Do not immerse the projector or battery in any liquid or allow either to get
wet.

• Use only 3M approved power supply and lithium ion battery provided.

• Do not disassemble or short circuit the battery.

• Do not dispose of the battery by incineration or fire.

• Do not operate this projector in any environment above 35°C (95°F).

• Do not expose the projector or battery to direct sunlight in a closed space

such as avehicle.

• Do not carry the battery in pockets, purses or handbags where it may contact
metalobjects.

• Do not place battery in contact with metal objects.

• Do not expose or store battery in direct sunlight or excessive heat (>60°C

[140°F]), or in moist or caustic environments.

To reduce the risks associated with driver distraction:

• Do not use this projector in a moving motor vehicle.

To reduce the risks associated with choking:

• Keep AV adapters and other small parts away from young children.

English

© 2012 3M. All Rights Reserved.

5

3M™ Mobile Projector MP225

m Warning

English

To reduce the risk associated with fire and explosion, battery leakage
or overheating:

• Do not immerse the battery in water or allow it to get wet.

• Do not reverse the positive(+) and negative(-) terminals.

• Do not connect the battery directly to a wall outlet. Use only the 3M specified

wall charger or automobile charger.

• Do not strike, throw or subject the battery to physical shock.

• Do not pierce the battery or break it open.

• Keep batteries out of the reach of children.

• Do not recharge the battery near a heat source or in extremely hot

conditions.

• Do not use the battery if it gives off an odor, generates heat, or becomes
discolored ordeformed.

• Keep away from exposed flames if the battery leaks or emits an odor.

• Flush the eyes with water and seek medical attention if the battery leaks and

battery fluid gets in the eyes.

m Caution

To reduce the risks associated with hearing loss:

• Be sure to read earphone manufacturer's instructions with respect to volume
level.

• User is responsible to set a safe volume level.

To reduce the risk associated with environmental contamination:

• Dispose of all system components in accordance with applicable government
regulations.

To reduce the risks associated with LED bright light:

• Do not stare directly into the projector lens.

To reduce the risks associated with tripping and falling:

• Position the charging cord and data cables so that they are not a tripping
hazard.

SAVE THESE INSTRUCTIONS

6 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

Safety Labels

LITHIUM ION BATTERY

Model No. LIN370-002
23Wh (10.9 5V 2100mAh)
P/N 78-6972-0058-8

m Warning

• Use a specified charger.

• Do not throw the battery into fire or heat.

• Do not short-circuit the battery terminals.

• Do not disassemble the battery.

Charging Specification

Standard Charge 12.3V/1.1A

Cut Off Voltage 9V

Max Charge 12.3V/2.1A

English

LED Light Output

CLASS 1 LED

PRODUCT

© 2012 3M. All Rights Reserved.

IEC60825-1 :1993+A1

:1997+A2:2001

7

Maximum Radiant Power:

1.693 mW

Package Contents

English

1 3M Mobile Projector MP225

2 Rechargeable Battery

3 Outlet Adapters (4)

4 Power Adapter

5 Product Warranty and

Safety Guide

6 Quick Start Guide

7 AV Cable for Apple

Devices

3M™ Mobile Projector MP225

1

2

®

5

3

4

6

7

8 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

English

Parts

1 Power Button

2 Mute Button

3 Volume Down Button

4 Volume Up Button

5 Battery Status Button

6 Status Indicator

7 Focus Wheel

8 Lens

9 Speaker

10 Flip Stand

11 Tripod Socket

12 Battery

13 Battery Latch

14 Earphone jack

15 VGA-A/V Input

16 DC Power Input

1

2

3

6

7 8 9

10

11 139 12

4

5

© 2012 3M. All Rights Reserved.

14 15 16

9

3M™ Mobile Projector MP225

Getting Started

English

Removing the Protective Film

When the projector is shipped, there is a protective film between the battery and
the battery contacts on the projector. Remove the protective film by removing the
battery and the protective film, discard the film and finally install the battery.

Install Battery

The 3M Mobile Projector MP225 comes with a rechargeable battery. The battery
should be fully charged before using the projector with the battery.

To install the battery: point the contacts on the battery toward the contacts on the
projector, insert the end farthest from the battery latch first, then push down until
the battery clicks into place.

Remove Battery

To remove the battery: slide the battery latch away from the battery and then lift the
battery out, starting at the end closest to the latch.

Important Note: Use only the 3M specified battery: 78-6972-0058-8.

10 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

Power Adapter

The power adapter is used to charge the battery or power the projector. There are
four outlet adapters to give you the flexibility to power the 3M MP225 projector in
most countries.

Installing an Outlet Adapter onto the Power Adapter

1 Select the outlet adapter that will plug into your wall outlet.

2 Align the outlet adapter to the power adapter and slide the outlet adapter into

place.

English

Replacing the Outlet Adapter

1 Push the button on the outlet adapter.

2 Slide the outlet adapter up.

3 Remove the outlet adapter.

4 Replace with the new outlet adapter.

© 2012 3M. All Rights Reserved.

11

3M™ Mobile Projector MP225

Charge the Battery

English

The rechargeable battery gives you up to two hours of battery life. When the battery
needs to be charged, the status indicator will flash red. The battery should be fully
charged before using the projector.

Charge the battery by connecting the power adapter to the projector.

1 Turn the projector power off.

2 Connect the power adapter to the projector’s DC input.

3 Connect the other end of the power adapter into the electrical outlet.

4 The status indicator will change to amber while the battery is charging.

5 Allow three hours to fully charge the battery. When charging is complete, the

status indicator will turn off.

110–240 VAC
50/60 Hz

Note: The battery status will not appear when the power adapter is connected
to the projector. The power adapter icon will appear instead.

12 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

Battery Charging Notes:

• If the projector power is off, allow three hours for the battery to fully recharge.
If the projector power is on, the battery will take longer to charge.

• The battery has a lifespan and ages every time it is fully charged and
discharged. The battery will gradually lose charge capacity as it ages.
Therefore, as the battery ages the battery life will decrease.

Battery Maintenance Tips:

• Remove the battery when the projector will not be used for one week or
longer.

• Charge and discharge the battery by turning on the projector at least once a
month.

• When storing the battery for more than a month, store it at 50% charge. The
battery is at 50% charge when the battery icon has three bars.

• Do not store a fully discharged battery because it may lose the ability to be
recharged.

• Do not store a fully charged battery because it may lose the ability to be
recharged to fullpower.

English

© 2012 3M. All Rights Reserved.

13

3M™ Mobile Projector MP225

Making Connections

English

The 3M Mobile Projector MP225 will display informational icons depending on the
input device and signal being detected. The 3M MP225 was designed to operate
with the 3M VGA and AVcablesonly.

Connecting to Apple® Devices

Use the supplied AV cable to input video from an Apple device into the VGA-AV
input on the projector.

Compatible Devices: The New iPad (3rd Gen.)/iPad 2/iPad 1, iPhone 4S/
iPhone 4/iPhone 3GS/iPhone 3G, iPhone, iPod Touch 4G/3G/2G, iPod Classic,
iPod Nano 5G/4G/3G

Instructions

1 Connect the AV Cable to the projector’s VGA-AV input.

2 Connect the 30 pin connector to your Apple Device.

to Apple® Device

14 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

Connecting to a Composite Video Device

(OptionalAccessory)

Use the AV cable to input video from camcorders, digital cameras, DVD players and
digital media players into the VGA-AV input on the projector.

1 Connect the AV cable to the projector’s VGA-AV input.

2 Connect the other end of the AV cable to the video device’s audio and video

outputs.

Tip: Some video devices do not have the standard audio and video
connections and may require an AV cable specified by the manufacturer. The
AV cable allows you to connect your video device to your TV monitor or your
projector and may be purchased from the video device manufacturer. Once
you have the AV cable, use the cable adapters to connect the video device
cable and the projector cable.

English

© 2012 3M. All Rights Reserved.

15

3M™ Mobile Projector MP225

Connecting to a Component Video Device

English

(OptionalAccessory)

For component video input, you must purchase the optional 3M MP225 Component
AV Cable [3M part number 78-6972-0032-3]. This cable sends a higher quality
video signal for the best possible image.

1 Connect the component AV cable to the projector’s VGA-AV input.

2 Connect the other end of the AV cable to the video device’s audio and video

outputs.

Important Note: There are two red connectors on the Component AV cable.
One is for the right audio channel and the other is for the Pr component video
signal. Be careful to connect the red audio to red audio and red video to red
video. If these connectors are switched, the projected image will appear green
and an abnormal noise will come from the rightspeaker.

Tip: Some video devices do not have the standard audio and video connections
and may require an AV cable specified by the manufacturer. The AV cable
allows you to connect your video device to your TV monitor or your projector
and may be purchased from the video device manufacturer. Once you have the
AV cable, use the cable adapters to connect the video device cable and the
projector cable.

Some video devices, by default, will not output a video signal. The video device’s
manual should provide instructions on how to change the video output setting.

16 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

Connecting to a Computer (OptionalAccessory)

Use the VGA-audio cable to connect the projector to desktop computers, laptop
computers, ultra-portable computers and some personal digital assistants (PDAs).
The projector supports VGA, SVGA, XGA, and WXGA resolutions. For best results,
set the computer’s resolution to SVGA (800x600).

1 Connect the VGA cable to the 3M Mobile Projector MP225.

2 Connect the VGA cable to the computer’s video and audio outputs.

3 Set the computer resolution to one of the supported resolutions.

English

Description Resolution (width x

height)

VGA 640 x 480 60 Hz

SVGA 800 x 600 60 Hz

XGA 1024 x 768 60 Hz

WXGA 1280 x 768 60 Hz

1280 x 960 60Hz

1440 x 900 60Hz

MAC 640 x 480 67Hz

832 x 624 75Hz

1152 x 870 75Hz

Refresh Rate

© 2012 3M. All Rights Reserved.

17

3M™ Mobile Projector MP225

Basic Operating Instructions

English

Powering On

Press and hold the power button for three seconds. Release the power button when
the projector begins to project an image and the status indicator turns green.

Tip: The video output on some devices is turned off by default. Please refer to
the device’s documentation for details on enabling the video output.

Powering Off

Press and hold the power button for three seconds. Release the power button when
the projected image is gone. The projector is off when the status indicator is off or
solid amber. When the status indicator is solid amber, the battery is charging.

18 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

Status Indicator Light

The status indicator light provides information about the projector’s state.

Status Indicator Light Meaning

Flashes green three times

Blank

Flashes green The projector is starting up.
Solid green The projector is on.
Solid amber The projector is off and charging the battery.
Flashes amber The projector has overheated and needs to cool.
Flashes red twice and pauses

then repeats

Flashes Red

A new power source is connected to the projector and the
projector is ready to be powered on.

Projector is off. If the power adapter is connected to the
projector, and the battery is installed, the battery has
finished charging.

The projector cannot charge the battery.

The projector cannot turn on because the battery needs to
be charged.

On Screen Icons

The projector will display a video icon when it is connected to a video cable or a
video source.

Icon Description/ Meaning

The projector detects the audio/video cable.

English

NTSC

PAL

RGB 480i 60Hz

800x600 60Hz

© 2012 3M. All Rights Reserved.

The projector detects an NTSC video input signal.

The projector detects a PAL video input signal.

The projector detects the component audio/video cable.

The projector detects the video input signal and displays
the video source’s resolution and refresh rate below the
component icon.

The projector detects the VGA-audio cable.

The projector detects computer input signal and displays the
input resolution and refresh rate

The projector does not support the video signal.

The projector is measuring and synchronizing to video input
signal.

19

3M™ Mobile Projector MP225

Adjusting Image Size

English

The 3M MP225 Projector can project a diagonal image of 10 to 80 inches
(254–2032 mm). Refer to the chart for associated dimensions.

Image Size
Diagonal

10 in (25.4 cm) 8 in (20.3 cm) 6 in (15.2 cm) 12 in (30.5 cm)

14 in (35.56 cm) 11 1/4 in (28.4 cm) 8 3/8 in (21.3 cm) 16 3/4 in (42.7 cm)

20 in (50.8 cm) 16 in (40.6 cm) 12 in (30.5 cm) 24 in (61 cm)

26 in (66.04 cm) 20 3/4 in (52.8 cm) 15 5/8 in (39.6 cm) 31 2/8 in (79.2 cm)

32 in (81.28 cm) 25 5/8 in (65 cm) 19 1/4 in (48.8 cm) 38 3/8 in (97.5 cm)

38 in (96.52 cm) 30 3/8 in (77.2 cm) 22 3/4 in (57.9 cm) 45 5/8 in (115.8 cm)

44 in (111.76 cm) 35 1/4 in (89.4 cm) 26 3/8 in (67.1 cm) 53 in (134.1 cm)

50 in (127 cm) 40 in (101.6 cm) 30 in (76.2 cm) 60 in (152.4 cm)

60 in (152.4 cm) 48 in (121.9 cm) 36 in (91.4 cm) 72 in (182.9 cm)

70 in (177.8 cm) 56 in (142.2 cm) 42 in (106.7 cm) 84 in (213.4 cm)

80 in (203.2 cm) 64 in (162.6 cm) 48 in (121.9 cm) 96 in (243.8 cm)

Width

Height Distance

Important Note: As you increase the size of the projected image, you will need
to decrease (darken) the ambient room lighting.

Adjusting the Focus

Turn the focus wheel to sharpen the image.

20 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

Adjusting the Volume

Press the Volume Up or Volume Down button to adjust the sound. A volume bar will
appear on the screen to help you set the volume level.

Muting the Volume

Press the MUTE button to mute the volume. An icon will appear on the screen to
indicate the current setting. To restore the volume, press the MUTE button again.
If you press the Volume Up or Volume Down button while the volume is muted, the
volume will also be restored, but from an initial volume level of zero.

English

Checking the Battery Level

To check the battery, press the Battery Status button. A battery bar will appear on
the screen indicating the amount of charge currently in the battery.

© 2012 3M. All Rights Reserved.

21

3M™ Mobile Projector MP225

Attaching the Tripod (Optional Accessory)

English

The table-top tripod (optional accessory) mounts to the bottom of the projector.

Tip: The 3M MP225 Projector will attach to most camera tripods.

Cleaning the Projector

1 Turn off the projector and disconnect power and other cables.

™

2 Use a soft cloth, such as the 3M

off dust. If the dust is difficult to remove, dampen the cloth with clean water
and then wipe the projector clean. Then use a clean cloth to dry the projector.

High Performance Cleaning Cloth, to wipe

Important Note: Do not use cleaning chemicals or solvents to clean the
projector. Cleaning chemicals and solvents may cause the plastic parts to
discolor.

22 © 2012 3M. All Rights Reser ved.

3M™ Mobile Projector MP225

Troubleshooting

The projector will not turn on.

• The battery is not properly installed, or the power adapter is not connected to
the projector and a working wall outlet. Test the electrical outlet by plugging
another electrical device (like a radio) into the wall outlet to confirm that the
wall outletworks.

• Attempt to remove and replace the battery.

• Hold down the power button until the projector powers up.

The status indicator is flashing red when the power button is held down.

• The battery needs to be charged or reinstalled. See “Charge the Battery” on
page 12.

The image is not visible or is very dim.

• The 3M MP225 Projector is a battery-operated device and requires controlled
lighting conditions. The image may appear very dim in brightly lit rooms.

• Make sure the status indicator is green. This indicates that the projector is
powered on and projecting an image.

• Project the image onto a flat, white surface.

• Decrease the light on the surface where the image is being projected.

• Decrease the size of the image.

• When there is nothing connected to the projector, it will project the startup

screen.

The projector is displaying a question mark.

• The projector does not support the video or computer input signal. Switch to
a signal that the projector supports. See “Supported Computer Signals” on
page 26.

A computer is connected to the projector but the projector will not display
the computer’s image.

• Plug the VGA-audio cable into the projector and the icon in the upper-left
corner of the image will display the “VGA-Audio cable” icon. See “On Screen
Icons” on page 19.

The projector is making a noise.

• The projector has a small fan for cooling the LED light source. The fan turns
on and off automatically based on the projector’s internal temperature. The
fan will turn on more often in warm environments or at high altitudes.

• The speakers make noise when the volume is set to high and nothing is
connected to the projector audio inputs. This is typical. Reduce the projector’s
volume setting to zero.

• The speakers may make noise when the component AV cable is not
correctly connected to the video device. There are two red connectors on
the component AV cable. One is for the right audio channel and the other
is for the Pr component video signal. If these connectors are switched, the
projected image will appear green and an abnormal noise will come from the
right speaker.

© 2012 3M. All Rights Reserved.

23

English

3M™ Mobile Projector MP225

My video device is connected to the projector but the projector will not

English

display thevideo.

• Unplug the AV cable from the projector and the splash screen willdisplay.

• Plug the AV cable into the projector and the icon in the upper-left corner of the

image will display the “AV cable” icon. See “On Screen Icons” on page 19.

• The video output on some devices is turned off by default. Please refer to the
device’s documentation for details on enabling the video output.

24 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

Specifications

Projector

Description Specification

Imager Technology LCOS

Size 9.4 mm (0.37")

Resolution SVGA 800 x 600 Pixels

Aspect Ratio 4:3

Projection Distance 8.4 in. – 50.4 in. (213–1280 mm)

Image Size 10 in. – 60 in. Diagonal (254–1524 mm)

English

Throw Ratio (Diagonal:
Distance)

Lens Offset 1:1 (none)

Inputs DC-in, AV-in (inc. VGA and component)

Compatible Resolutions VGA, SVGA, XGA, WXGA, 1280 x 960 @

Vertical Scan Rate 50 Hz / 60 Hz, MAC - 67 Hz / 75 Hz

Horizontal Scan Rate 31.5 kHz – 49.68kHz

Video Compatibility NTSC, PAL

Video Resolutions 480i, 480p, 576i, 576p, PAL, NTSC,

Dimensions 5.91 x 2.56 x 1.20 in.

Weight ≤ 11.46 oz (≤ 325 g)

Tripod Socket ¼" - 20

Operating Conditions Temperature

Range

Humidity Range 10–80% RH without condensation

Altitude Range Sea Level to 1,829 m (6000')

1:0.84

60Hz, 1440 x 900 @ 60Hz, MAC 640 x
480 @ 67Hz, 832 x 624 @ 75Hz, 1152 x
870 @ 75Hz

H.264, SD (480i/576i), HD (720p/1080i)

(150 x 65 x 30.5 mm)

32 – 95°F (0-35°C)

© 2012 3M. All Rights Reserved.

25

3M™ Mobile Projector MP225

LIN370-002 Rechargeable Lithium-Ion Battery

English

Description Specification

Type (LIN370-002) Rechargeable Lithium-Ion Battery

Rated Capacity 10.95 V 2100 mAh, 23 Wh

Dimensions 81.5 x 64 x 23 mm

Important Note: Do not throw battery into trash. Please dispose of it according
to federal, state, or local laws.

Supported Computer Signals

Description Resolution (width x height) Refresh Rate

VGA 640 x 480 60 Hz

SVGA 800 x 600 60 Hz

XGA 1024 x 768 60 Hz

WXGA 1280 x 768 60 Hz

1280 x 960 60Hz

1440 x 900 60Hz

MAC 640 x 480 67Hz

832 x 624 75Hz

1152 x 870 75Hz

Replacement Parts / Accessories

Description 3M Part Number

Power Adapter with US, EU, UK, AUS plugs 78-6972-0063-8

Lithium-Ion Battery 78-6972-0058-8

AV Video Cable 78- 6972-0031-5 Optional

VGA Cable 78-6972-0062-0 Optional

Component AV cable 78-6972-0032-3 Optional

3M Adapter Cable for Apple

®

78-6972-0064-6

26 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

Limited Warranty

This warranty applies to the continental US only. The warranty terms, conditions,
remedy and limitation may vary in other countries. Contact your local 3M Company
for warranty information.

• The 3M

• All other accessories included with the 3M product are warranted to be free

• Optional product accessories that are not sold as part of the 3M product are

THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE
OF ANY AND ALL WARRANTIES, E XPRESS OR IMPLIED WARRANTIES OR
CONDITIONS, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY INDUSTRY PRACTICE OR
CUSTOM OR TR ADE USAGE.

In the event the 3M product fails to conform to the above stated warranties within
the applicable warranty period, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or to refund the purchase price of the 3M product.
All replaced parts or products become property of 3M. If the product is repaired,
3M will repair the defective part(s) with a new or used part(s). If the 3M product is
replaced, 3M will replace the 3M product with the same or equivalent model and
with a new or refurbished 3M product. In the case of an approved warranty claim,
the replacement 3M product will carry only the remaining term of the original 3M
product’s warranty period as stated above. For warranty service, you must provide
proof of the date of the original purchase else the manufacturing code date will be
used to establish the start date of the warranty. The following are exclusions to the
above listedwarranty:

a. This warranty does not cover 3M product that is modified or damaged through

b. 3M product is designed to operate in the typical indoor environment.

™

Mobile Projector MP225 (the “3M product”) is warranted to be free
from defects in material or manufacture for a period of 1 year from the date
ofpurchase.

from defects in material or manufacture for a period of 1 year from the date of
purchase.

subject to individual warranties.

improper storage, misuse, abuse, accident, vandalism, improper installation,
neglect, improper shipping, damage caused by acts of war, disasters such
as fire, flood, and lightning, improper electrical current, software problems,
interaction with non-3M products, or service other than by an 3M Authorized
Service Provider, neglect or mishandling by any person. Normal wear and tear
is not covered under warranty.

This warranty does not cover 3M product used outside of the following
circumstances:

• 100V–240V AC, 50/60 Hz

• 0˚–35˚C (32˚–95˚F)

• 10–80% RH (without condensation)

• 0–1829 m (0– 6000 feet) above sea level

English

© 2012 3M. All Rights Reserved.

27

3M™ Mobile Projector MP225

c. The air intake and exhaust vent must be clear of obstructions. Inadequate air

English

ventilation will cause the 3M product to malfunction or will cause damage to
the 3M product which will void the warranty.

d. This warranty does not cover any additional costs including, but not limited

to, those associated with removal, cleaning or installation of the 3M product,
adjustments, (mechanical or electronic) made to the 3M product.

e. This warranty covers only normal use of the product. 24-hour-per-day or other

excessive continual use causes strain and is not considered normal use.

f. This warranty does not cover consumables (e.g., batteries).

g. This warranty is not transferable.

h. 3M is not responsible for warranty service should the 3M label or logo or the

rating label or serial number be removed unless otherwise stated in writing for
the purposes of private labeling for partnership requirements.

i. This warranty does not cover postage, insurance, or shipping costs

incurred in presenting your 3M product for warranty service. Said costs
are the customer’s responsibility. If a claimed defect cannot be identified
or reproduced in service, the customer may be held responsible for cost
incurred. Should your warranty upgrade include a “change out” service and
the claimed defect cannot be identified or reproduced by the technician, the
customer will be responsible for call out costs.

FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE APPROPRIATE
3M PRODUCT MANUAL OR TO USE THE 3M PRODUCT IN ACCORDANCE
WITH 3M’S INTENDED USE STATEMENT, WILL VOID ALL WARRANTIES AND
LIMITED REMEDIES.

EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL,
3M SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF
PROFITS, REVENUE OR BUSINESS) RESULTING FROM, OR IN ANY WAY RELATED
TO PERFORMANCE, USE OR INABILITY TO USE ANY OF THE 3M PRODUCT. This
limitation applies regardless of the legal theory upon which damages aresought.

For warranty support, please call or write your local 3M office or a 3M Authorized
Service Provider to obtain an RMA # (Return Material Authorization number) before
returning the product. If you are inside the Continental United States of America,
please contact 3MCustomer Service at 1-866-631-1656 or email meetings@
mmm.com.

What 3M Will Do To Correct Problems:

• If your 3M product requires service, 3M will ask you to bring or send the
3M product, securely packaged in its original container or equivalent, along
with proof of the date of original purchase, to your 3M Service Dealer or 3M
Service Center.

• 3M will, at its option, repair or replace the defective unit without charge for
parts or labor. Return of the 3M product will be at 3M’s expense.

• When warranty service involves the exchange of the 3M product or of a part,
the item replaced becomes 3M property.

28 © 2012 3M. All Rights Reserved.

3M™ Mobile Projector MP225

• The exchanged 3M product or part may be new or previously refurbished
to the 3Mstandard of quality, and at 3M’s option, the replacement may be
another model of likekind and quality.

• 3M’s liability for replacement of the warranted 3M product or part will
not exceed the original retail selling price of the 3M product. Exchange or
replacement products or parts assume the remaining warranty period of the
product covered by this limited warranty.

FCC STATEMENT - CLASS B

This equipment generates, uses and can radiate radio frequency energy, and
if not installed and used in accordance with the instruction manual may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class “B” computing device pursuant to Subpart B of Part 15
of the FCC Rules, which are designed to provide reasonable protection against
such interference when operated in a residential installation. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTICE: This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.

INSTRUCTIONS TO USERS: This equipment complies with the requirements of
FCC equipment provided that the following conditions are met. If the cables include
a EMI ferrite core, attach the ferrite core end of the cable to the projector. Use the
cables which are included with the projector orspecified.

Note: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

CE Statement
ElectroMagnectic Compatibility Statement: Meets 2004/108/EC Directive

Low Voltage Directive: Meets 2006-95-EC Directive.

English

© 2012 3M. All Rights Reserved.

29

3M™ Mobile Projector MP225

WEEE Statement

English

The following information is only for EU-members States:

The mark shown to the right is in compliance with Waste
Electrical and Electronic Equipment Directive 2002/96/
EC (WEEE). The mark indicates the requirement NOT to
dispose the equipment as unsorted municipal waste, but
use the return and collection systems according to local
law.

RoHS Statement

3M Mobile Interactive Solutions can provide RoHS certification for products meeting
the RoHS directive.

European (EU) Restriction of Hazardous Substances (RoHS) Directive, 2002/95/EC,

1

RoHS compliant means that the product or part does not contain any of the substances in
excess of the following maximum concentration values in any homogeneous material, unless
the substance is in an application that is exempt under RoHS, as amended:(a) 0.1% (by
weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated
diphenyl ethers; or (b) 0.01% (by weight) for cadmium. This information represents 3M’s
knowledge and belief, which may be based on information provided by third party suppliers
to 3M.

1

Patents

This product includes a component covered by U.S. Patent Nos. 7,071,908 and
7,667,678, Hong Kong Patent No. HK1088976, Australia Patent No. 2004241602,
United Kingdom Patent No. 2417360 and other U.S. and international patents
pending, owned by Syndiant Inc.

30 © 2012 3M. All Rights Reser ved.

3M™ Mobile Projector MP225

English

© 2012 3M. All Rights Reserved.

31

3M is a trademark of 3M Company.

3

Mobile Interactive Solutions
3M Austin Center

© 3M 2012. All Rights Reserved.
78 - 6971-162 7-1